ledisdb/doc/commands.md

Summary

ledisdb use redis protocol called RESP(REdis Serialization Protocol), here.

ledisdb all commands return RESP fomrat and it will use int64 instead of RESP integer, string instead of RESP simple string, bulk string instead of RESP bulk string, and array instead of RESP arrays below.

Table of Contents

• Summary

• KV

  • DECR key
  • DECRBY key decrement
  • DEL key [key ...]
  • EXISTS key
  • GET key
  • GETSET key value
  • INCR key
  • INCRBY key increment
  • MGET key [key ...]
  • MSET key value [key value ...]
  • SET key value
  • SETNX key value
  • EXPIRE key seconds
  • EXPIREAT key timestamp
  • TTL key
  • PERSIST key

• Hash

  • HDEL key field [field ...]
  • HEXISTS key field
  • HGET key field
  • HGETALL key
  • HINCRBY key field increment
  • HKEYS key
  • HLEN key
  • HMGET key field [field ...]
  • HMSET key field value [field value ...]
  • HSET key field value
  • HVALS key
  • HCLEAR key
  • HMCLEAR key [key...]
  • HEXPIRE key seconds
  • HEXPIREAT key timestamp
  • HTTL key
  • HPERSIST key

• List

  • LINDEX key index
  • LLEN key
  • LPOP key
  • LRANGE key start stop
  • LPUSH key value [value ...]
  • RPOP key
  • RPUSH key value [value ...]
  • LCLEAR key
  • LMCLEAR key [key...]
  • LEXPIRE key seconds
  • LEXPIREAT key timestamp
  • LTTL key
  • LPERSIST key

• ZSet

  • ZADD key score member [score member ...]
  • ZCARD key
  • ZCOUNT key min max
  • ZINCRBY key increment member
  • ZRANGE key start stop [WITHSCORES]
  • ZRANGEBYSCORE key min max [WITHSCORES] [LIMIT offset count]
  • ZRANK key member
  • ZREM key member [member ...]
  • ZREMRANGEBYRANK key start stop
  • ZREMRANGEBYSCORE key min max
  • ZREVRANGE key start stop [WITHSCORES]
  • ZREVRANGEBYSCORE key max min [WITHSCORES] [LIMIT offset count]
  • ZREVRANK key member
  • ZSCORE key member
  • ZCLEAR key
  • ZMCLEAR key [key ...]
  • ZEXPIRE key seconds
  • ZEXPIREAT key timestamp
  • ZTTL key
  • ZPERSIST key

• Bitmap

  • BSETBIT key offset value
  • BGETBIT key offset
  • BGET key
  • BCOUNT key [start, end]
  • BEXPIRE key seconds
  • BEXPIREAT key timestamp
  • BTTL key
  • BPERSIST key

• Replication

  • SLAVEOF host port
  • FULLSYNC
  • SYNC index offset

• Server

  • PING
  • ECHO message
  • SELECT index

KV

DECR key

Decrements the number stored at key by one. If the key does not exist, it is set to 0 before decrementing. An error returns if the value for the key is a wrong type that can not be represented as a signed 64 bit integer.

Return value

int64: the value of key after the decrement

Examples

ledis> DECR mykey
(integer) -1
ledis> DECR mykey
(integer) -2
ledis> SET mykey "234293482390480948029348230948"
OK
ledis> DECR mykey
ERR strconv.ParseInt: parsing "234293482390480948029348230948“: invalid syntax

DECRBY key decrement

Decrements the number stored at key by decrement. like DECR.

Return value

int64: the value of key after the decrement

Examples

ledis> SET mykey “10“
OK
ledis> DECRBY mykey “5“
(integer) 5

DEL key [key ...]

Removes the specified keys.

Return value

int64: The number of input keys

Examples

ledis> SET key1 "hello"
OK
ledis> SET key2 "world"
OK
ledis> DEL key1 key2
(integer) 2

EXISTS key

Returns if key exists

Return value

int64, specifically:

• 1 if the key exists.
• 0 if the key does not exists.

Examples

ledis> SET key1 "hello"
OK
ledis> EXISTS key1
(integer) 1
ledis> EXISTS key2
(integer) 0

GET key

Get the value of key. If the key does not exists, it returns nil value.

Return value

bulk: the value of key, or nil when key does not exist.

Examples

ledis> GET nonexisting
(nil)
ledis> SET mykey "hello"
OK
ledis> GET mykey
"hello"

GETSET key value

Atomically sets key to value and returns the old value stored at key.

Return value

bulk: the old value stored at key, or nil when key did not exists.

Examples

ledis> SET mykey "hello"
OK
ledis> GETSET mykey "world"
"hello"
ledis> GET mykey
"world"

INCR key

Increments the number stored at key by one. If the key does not exists, it is SET to 0 before incrementing.

Return value

int64: the value of key after the increment

Examples

ledis> SET mykey "10"
OK
ledis> INCR mykey
(integer) 11
ledis> GET mykey
"11"

INCRBY key increment

Increments the number stored at key by increment. If the key does not exists, it is SET to 0 before incrementing.

Return value

int64: the value of key after the increment

Examples

ledis> SET mykey "10"
OK
ledis> INCRBY mykey 5
(integer) 15

MGET key [key ...]

Returns the values of all specified keys. If the key does not exists, a nil will return.

Return value

array: list of values at the specified keys

Examples

ledis> SET key1 "hello"
OK
ledis> SET key2 "world"
OK
ledis> MGET key1 key2 nonexisting
1) "hello"
2) "world"
3) (nil)

MSET key value [key value ...]

Sets the given keys to their respective values.

Return value

string: always OK

Examples

ledis> MSET key1 "hello" key2 "world"
OK
ledis> GET key1
"hello"
ledis> GET key2
"world"

SET key value

Set key to the value.

Return value

string: OK

Examples

ledis> SET mykey "hello"
OK
ledis> GET mykey
"hello"

SETNX key value

Set key to the value if key does not exist. If key already holds a value, no operation is performed.

Return value

int64:

• 1 if the key was SET
• 0 if the key was not SET

Examples

ledis> SETNX mykey "hello"
(integer) 1
ledis> SETNX mykey "world"
(integer) 0
ledis> GET mykey
"hello"

EXPIRE key seconds

Set a timeout on key. After the timeout has expired, the key will be deleted.

Return value

int64:

• 1 if the timeout was set
• 0 if key does not exist or the timeout could not be set

Examples

ledis> SET mykey "hello"
OK
ledis> EXPIRE mykey 60
(integer) 1
ledis> EXPIRE mykey 60
(integer) 1
ledis> TTL mykey
(integer) 58
ledis> PERSIST mykey
(integer) 1

EXPIREAT key timestamp

Set an expired unix timestamp on key.

Return value

int64:

• 1 if the timeout was set
• 0 if key does not exist or the timeout could not be set

Examples

ledis> SET mykey "Hello"
OK
ledis> EXPIREAT mykey 1293840000
(integer) 1
ledis> EXISTS mykey
(integer) 0

TTL key

Returns the remaining time to live of a key that has a timeout. If the key was not set a timeout, -1 returns.

Return value

int64: TTL in seconds

Examples

ledis> SET mykey "hello"
OK
ledis> EXPIRE mykey 10
(integer) 1
ledis> TTL mykey
(integer) 8

PERSIST key

Remove the existing timeout on key

Return value

int64:

• 1 if the timeout was removed
• 0 if key does not exist or does not have an timeout

Examples

ledis> SET mykey "hello"
OK
ledis> EXPIRE mykey 60
(integer) 1
ledis> TTL mykey
(integer) 57
ledis> PERSIST mykey
(integer) 1
ledis> TTL mykey
(integer) -1

Hash

HDEL key field [field ...]

Removes the specified fiedls from the hash stored at key.

Return value

int64: the number of fields that were removed from the hash.

Examples

ledis> HSET myhash field1 "foo"
(integer) 1
ledis> HDEL myhash field1 field2
(integer) 1

HEXISTS key field

Returns if field is an existing field in the hash stored at key.

Return value

int64:

• 1 if the hash contains field
• 0 if the hash does not contain field, or key does not exist.

Examples

ledis> HSET myhash field1 "foo"
(integer) 1
ledis> HEXISTS myhash field1 
(integer) 1
ledis> HEXISTS myhash field2
(integer) 0

HGET key field

Returns the value associated with field in the hash stored at key.

Return value

bulk: the value associated with field, or nil.

Examples

ledis> HSET myhash field1 "foo"
(integer) 1
ledis> HGET myhash field1
"foo"
ledis> HGET myhash field2
(nil)

HGETALL key

Returns all fields and values of the hash stored at key.

Return value

array: list of fields and their values stored in the hash, or an empty list (using nil in ledis-cli)

Examples

ledis> HSET myhash field1 "hello"
(integer) 1
ledis> HSET myhash field2 "world"
(integer) 1
ledis> HGETALL myhash
1) "field1"
2) "hello"
3) "field2"
4) "world"

HINCRBY key field increment

Increments the number stored at field in the hash stored at key by increment. If key does not exist, a new hash key is created. If field does not exists the value is set to 0 before incrementing.

Return value

int64: the value at field after the increment.

Examples

ledis> HINCRBY myhash field 1
(integer) 1
ledis> HGET myhash field
"1"
ledis> HINCRBY myhash field 5
(integer) 6
ledis> HINCRBY myhash field -10
(integer) -4

HKEYS key

Return all fields in the hash stored at key.

Return value

array: list of fields in the hash, or an empty list.

Examples

ledis> HSET myhash field1 "hello"
(integer) 1
ledis> HSET myhash field2 "world"
(integer) 1
ledis> HKEYS myhash
1) "field1"
2) "field2"

HLEN key

Returns the number of fields contained in the hash stored at key

Return value

int64: number of fields in the hash, or 0 when key does not exist.

Examples

ledis> HSET myhash field1 "hello"
(integer) 1
ledis> HSET myhash field2 "world"
(integer) 1
ledis> HLEN myhash
(integer) 2

HMGET key field [field ...]

Returns the values associated with the specified fields in the hash stored at key. If field does not exist in the hash, a nil value is returned.

Return value

array: list of values associated with the given fields.

Examples

ledis> HSET myhash field1 "hello"
(integer) 1
ledis> HSET myhash field2 "world"
(integer) 1
ledis> HMGET myhash field1 field2 nofield
1) "hello"
2) "world"
3) (nil)

HMSET key field value [field value ...]

Sets the specified fields to their respective values in the hash stored at key.

Return value

string: OK

Examples

ledis> HMSET myhash field1 "hello" field2 "world"
OK
ledis> HMGET myhash field1 field2
1) "hello"
2) "world"

HSET key field value

Sets field in the hash stored at key to value. If key does not exists, a new hash key is created.

Return value

int64:

• 1 if field is a new field in the hash and value was set.
• 0 if field already exists in the hash and the value was updated.

Examples

ledis> HSET myhash field1 "hello"
(integer) 1
ledis> HGET myhash field1
"hello"
ledis> HSET myhash field1 "world"
(integer) 0
ledis> HGET myhash field1
"world"

HVALS key

Returns all values in the hash stored at key.

Return value

array: list of values in the hash, or an empty list.

Examples

ledis> HSET myhash field1 "hello"
(integer) 1
ledis> HSET myhash field2 "world"
(integer) 1
ledis> HVALS myhash
1) "hello"
2) "world"

HCLEAR key

Deletes the specified hash keys

Return value

int64: the number of fields in the hash stored at key

Examples

ledis> HMSET myhash field1 "hello" field2 "world"
OK
ledis> HCLEAR myhash
(integer) 2

HMCLEAR key [key...]

Deletes the specified hash keys.

Return value

int64: the number of input keys

Examples

ledis> HMSET myhash field1 "hello" field2 "world"
OK
ledis> HMCLEAR myhash
(integer) 1

HEXPIRE key seconds

Sets a hash key's time to live in seconds, like expire similarly.

Return value

int64:

• 1 if the timeout was set
• 0 if key does not exist or the timeout could not be set

Examples

ledis> HSET myhash a  100
(integer) 1
ledis> HGET myhash a
100
ledis> HEXPIRE myhash 100
(integer) 1
ledis> HTTL myhash
(integer) 94
ledis> HPERSIST myhash
(integer) 1
ledis> HTTL myhash
(integer) -1
ledis> HEXPIRE not_exists_key 100
(integer) 0

HEXPIREAT key timestamp

Sets the expiration for a hash key as a unix timestamp, like expireat similarly.

Return value

int64:

• 1 if the timeout was set
• 0 if key does not exist or the timeout could not be set

Examples

ledis> HSET myhash a  100
(integer) 1
ledis> HEXPIREAT myhash 1404999999
(integer) 1
ledis> HTTL myhash
(integer) 802475
ledis> HEXPIREAT not_exists_key  1404999999
(integer) 0

HTTL key

Returns the remaining time to live of a key that has a timeout. If the key was not set a timeout, -1 returns.

Return value

int64: TTL in seconds

Examples

ledis> HSET myhash a  100
(integer) 1
ledis> HEXPIREAT myhash 1404999999
(integer) 1
ledis> HTTL myhash
(integer) 802475
ledis> HTTL not_set_timeout
(integer) -1

HPERSIST key

Remove the expiration from a hash key, like persist similarly. Remove the existing timeout on key.

Return value

int64:

• 1 if the timeout was removed
• 0 if key does not exist or does not have an timeout

ledis> HSET myhash a  100
(integer) 1
ledis> HEXPIREAT myhash 1404999999
(integer) 1
ledis> HTTL myhash
(integer) 802475
ledis> HPERSIST myhash
(integer) 1
ledis> HTTL myhash
(integer) -1
ledis> HPERSIST not_exists_key
(integer) 0

List

LINDEX key index

Returns the element at index index in the list stored at key. The index is zero-based, so 0 means the first element, 1 the second element and so on. Negative indices can be used to designate elements starting at the tail of the list. Here, -1 means the last element, -2 means the penultimate and so forth. When the value at key is not a list, an error is returned.

Return value

string: the requested element, or nil when index is out of range.

Examples

ledis> RPUSH a 1 2 3
(integer) 3
ledis> LINDEX a 0
1
ledis> LINDEX a 1
2
ledis> LINDEX a 2
3
ledis> LINDEX a 3
(nil)
ledis> LINDEX a -1
3

LLEN key

Returns the length of the list stored at key. If key does not exist, it is interpreted as an empty list and 0is returned. An error is returned when the value stored at key is not a list.

Return value

int64: the length of the list at key.

Examples

ledis> RPUSH a 'foo'
(integer) 1
ledis> RPUSH a 'bar'
(integer) 2
ledis> LLEN a
(integer) 2

LPOP key

Removes and returns the first element of the list stored at key.

Return value

bulk: the value of the first element, or nil when key does not exist.

Examples

ledis> RPUSH a 'one'
(integer) 1
ledis> RPUSH a 'two'
(integer) 2
ledis> RPUSH a 'three'
(integer) 3
ledis> LPOP a
one

LRANGE key start stop

Returns the specified elements of the list stored at key. The offsets start and stop are zero-based indexes, with 0 being the first element of the list (the head of the list), 1 being the next element and so on.

Return value

array: list of elements in the specified range.

Examples

ledis> RPUSH a 'one' 'two' 'three'
(integer) 3
ledis> LRANGE a 0 0
1) "one"
ledis> LRANGE a -100 100
1) "one"
2) "two"
3) "three"
ledis> LRANGE a -3 2
1) "one"
2) "two"
3) "three"
ledis> LRANGE a 0 -1
(empty list or set)

LPUSH key value [value ...]

Insert all the specified values at the head of the list stored at key. If key does not exist, it is created as empty list before performing the push operations. When key holds a value that is not a list, an error is returned.

Return value

int64: the length of the list after the push operations.

Examples

ledis> LPUSH a 1
(integer) 1
ledis> LPUSH a 2
(integer) 2
ledis> LRANGE a 0 2
1) "2"
2) "1"

RPOP key

Removes and returns the last element of the list stored at key.

Return value

bulk: the value of the last element, or nil when key does not exist.

Examples

edis > RPUSH a 1
(integer) 1
ledis> RPUSH a 2
(integer) 2
ledis> RPUSH a 3
(integer) 3
ledis> RPOP a
3
ledis> LRANGE a 0 3
1) "1"
2) "2"

RPUSH key value [value ...]

Insert all the specified values at the tail of the list stored at key. If key does not exist, it is created as empty list before performing the push operation. When key holds a value that is not a list, an error is returned.

Return value

int64: the length of the list after the push operation.

Examples

ledis>  RPUSH a 'hello'
(integer) 1
ledis> RPUSH a 'world'
(integer) 2
ledis> LRANGE a 0 2
1) "hello"
2) "world"

LCLEAR key

Deletes the specified list key

Return value

int64: the number of values in the list stored at key

Examples

ledis> RPUSH a 1 2 3
(integer) 3
ledis> LLEN a
(integer) 3
ledis> LCLEAR a
(integer) 3
ledis> LLEN a
(integer) 0

LMCLEAR key [key ...]

Delete multiple keys from list

Return value

int64: the number of input keys

Examples

ledis> rpush a 1
(integer) 1
ledis> rpush b 2
(integer) 1
ledis> lmclear a b
(integer) 2

LEXPIRE key seconds

Set a timeout on key. After the timeout has expired, the key will be deleted.

Return value

int64:

• 1 if the timeout was set
• 0 if key does not exist or the timeout could not be set

Examples

ledis> RPUSH a 1
(integer) 1
ledis> LEXPIRE a 100
(integer) 1
ledis> LTTL a
(integer) 96
ledis> LPERSIST a
(integer) 1
ledis> LTTL a
(integer) -1

LEXPIREAT key timestamp

Set an expired unix timestamp on key.

Return value

int64:

• 1 if the timeout was set
• 0 if key does not exist or the timeout could not be set

Examples

ledis> RPUSH a 1
(integer) 1
ledis> LEXPIREAT a 1404140183
(integer) 1
ledis> LTTL a
(integer) 570
ledis> LPERSIST a
(integer) 1
ledis> LTTL a
(integer) -1
ledis>

LTTL key

Returns the remaining time to live of a key that has a timeout. If the key was not set a timeout, -1 returns.

Return value

int64: TTL in seconds

Examples

ledis> RPUSH a 1
(integer) 1
ledis> LEXPIREAT a 1404140183
(integer) 1
ledis> LTTL a
(integer) 570
ledis> LPERSIST a
(integer) 1
ledis> LTTL a
(integer) -1

LPERSIST key

Remove the existing timeout on key

Return value

int64:

• 1 if the timeout was removed
• 0 if key does not exist or does not have an timeout

Examples

ledis> RPUSH a 1
(integer) 1
ledis> LEXPIREAT a 1404140183
(integer) 1
ledis> LTTL a
(integer) 570
ledis> LPERSIST a
(integer) 1
ledis> LTTL a
(integer) -1
ledis> LPERSIST b
(integer) 0

ZSet

ZADD key score member [score member ...]

Adds all the specified members with the specified scores to the sorted set stored at key. It is possible to specify multiple score / member pairs. If a specified member is already a member of the sorted set, the score is updated and the element reinserted at the right position to ensure the correct ordering.

If key does not exist, a new sorted set with the specified members as sole members is created, like if the sorted set was empty. If the key exists but does not hold a sorted set, an error is returned.

The score values should be the string representation of an int64 number. +inf and -inf values are valid values as well.

Currently, we only support int64 type, not double type.

Return value

int64, specifically:

The number of elements added to the sorted sets, not including elements already existing for which the score was updated.

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZADD myset 1 'uno'
(integer) 1
ledis> ZADD myset 2 'two' 3 'three'
(integer) 2
ledis> ZRANGE myset 0 -1 WITHSCORES
1) "one"
2) "1"
3) "uno"
4) "1"
5) "two"
6) "2"
7) "three"
8) "3"

ZCARD key

Returns the sorted set cardinality (number of elements) of the sorted set stored at key.

Return value

int64: the cardinality (number of elements) of the sorted set, or 0 if key does not exist.

Examples

edis > ZADD myset 1 'one'
(integer) 1
ledis> ZADD myset 1 'uno'
(integer) 1
ledis> ZADD myset 2 'two' 3 'three'
(integer) 2
ledis> ZRANGE myset 0 -1 WITHSCORES
1) "one"
2) "1"
3) "uno"
4) "1"
5) "two"
6) "2"
7) "three"
8) "3"
ledis> ZCARD myset
(integer) 4

ZCOUNT key min max

Returns the number of elements in the sorted set at key with a score between min and max. The min and max arguments have the same semantic as described for ZRANGEBYSCORE.

Return value

int64: the number of elements in the specified score range.

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZADD myset 1 'uno'
(integer) 1
ledis> ZADD myset 2 'two' 3 'three'
(integer) 2
ledis> ZRANGE myset 0 -1 WITHSCORES
1) "one"
2) "1"
3) "uno"
4) "1"
5) "two"
6) "2"
7) "three"
8) "3"
ledis> ZCOUNT myset -inf +inf
(integer) 4
ledis> ZCOUNT myset (1 3
(integer) 2

ZINCRBY key increment member

Increments the score of member in the sorted set stored at key by increment. If member does not exist in the sorted set, it is added with increment as its score (as if its previous score was 0). If key does not exist, a new sorted set with the specified member as its sole member is created. An error is returned when key exists but does not hold a sorted set. The score value should be the string representation of a numeric value. It is possible to provide a negative value to decrement the score.

Return value

bulk: the new score of member (an int64 number), represented as string.

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZADD myset 2 'two'
(integer) 1
ledis> ZINCRBY myset 2 'one'
3
ledis> ZRANGE myset 0 -1 WITHSCORES
1) "two"
2) "2"
3) "one"
4) "3"

ZRANGE key start stop [WITHSCORES]

Returns the specified range of elements in the sorted set stored at key. The elements are considered to be ordered from the lowest to the highest score. Lexicographical order is used for elements with equal score.

Return value

array: list of elements in the specified range (optionally with their scores).

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZADD myset 2 'two'
(integer) 1
ledis> ZADD myset 3 'three'
(integer) 1
ledis> ZRANGE myset 0 -1
1) "one"
2) "two"
3) "three"
ledis> ZRANGE myset 2 3
1) "three"
ledis> ZRANGE myset -2 -1
1) "two"
2) "three"

ZRANGEBYSCORE key min max [WITHSCORES] [LIMIT offset count]

Returns all the elements in the sorted set at key with a score between min and max (including elements with score equal to min or max). The elements are considered to be ordered from low to high scores.

Exclusive intervals and infinity

min and max can be -inf and +inf, so that you are not required to know the highest or lowest score in the sorted set to get all elements from or up to a certain score. By default, the interval specified by min and max is closed (inclusive). It is possible to specify an open interval (exclusive) by prefixing the score with the character (. For example:

ZRANGEBYSCORE zset (1 5

Will return all elements with 1 < score <= 5 while:

ZRANGEBYSCORE zset (5 (10

Will return all the elements with 5 < score < 10 (5 and 10 excluded).

Return value

array: list of elements in the specified score range (optionally with their scores).

Examples

ledis> ZADD myzset 1 'one'
(integer) 1
ledis> ZADD myzset 2 'two'
(integer) 1
ledis> ZADD myzset 3 'three'
(integer) 1
ledis> ZRANGEBYSCORE myzset -inf +inf WITHSCORES
1) "one"
2) "1"
3) "two"
4) "2"
5) "three"
6) "3"
ledis> ZRANGEBYSCORE myzset -inf +inf WITHSCORES LIMIT  2 5
1) "three"
2) "3"
ledis> ZRANGEBYSCORE myzset (1 2 WITHSCORES
1) "two"
2) "2"
ledis> ZRANGEBYSCORE myzset (1 (2 WITHSCORES

ZRANK key member

Returns the rank of member in the sorted set stored at key, with the scores ordered from low to high. The rank (or index) is 0-based, which means that the member with the lowest score has rank 0.

Return value

Return value

• If member exists in the sorted set, Integer reply: the rank of member.
• If member does not exist in the sorted set or key does not exist, Bulk string reply: nil.

Examples

ledis> ZADD myzset 1 'one'
(integer) 1
ledis> ZADD myzset 2 'two'
(integer) 1
ledis> ZADD myzset 3 'three'
(integer) 1
ledis> ZRANGEBYSCORE  myzset -inf +inf WITHSCORES
1) "one"
2) "1"
3) "two"
4) "2"
5) "three"
6) "3"
ledis> ZRANK myzset 'three'
(integer) 2

ZREM key member [member ...]

Removes the specified members from the sorted set stored at key. Non existing members are ignored. An error is returned when key exists and does not hold a sorted set.

Return value

int64 reply, specifically:

The number of members removed from the sorted set, not including non existing members.

Examples

ledis> ZADD myset 1 one 2 two 3 three 4 four
(integer) 3
ledis> ZRANGE myset 0 -1
1) "one"
2) "two"
3) "three"
4) "four"
ledis> ZREM myset three
(integer) 1
ledis> ZREM myset one four three
(integer) 2

ZREMRANGEBYRANK key start stop

Removes all elements in the sorted set stored at key with rank between start and stop. Both start and stop are 0 -based indexes with 0 being the element with the lowest score. These indexes can be negative numbers, where they indicate offsets starting at the element with the highest score. For example: -1 is the element with the highest score, -2 the element with the second highest score and so forth.

Return value

int64: the number of elements removed.

Examples

ledis> ZADD myset 1 one 2 two 3 three 4 four
(integer) 3
ledis> ZREMRANGEBYRANK myset 0 2
(integer) 3
ledis> ZRANGE myset 0 -1 WITHSCORES
1) "four"
2) "4"

ZREMRANGEBYSCORE key min max

Removes all elements in the sorted set stored at key with a score between min and max (inclusive). Min and max can be exclusive, following the syntax of ZRANGEBYSCORE.

Return value

int64: the number of elements removed.

Examples

ledis> ZADD myset 1 one 2 two 3 three 4 four
(integer) 4
ledis> ZREMRANGEBYSCORE myset -inf (2
(integer) 1
ledis> ZRANGE myset 0 -1 WITHSCORES
1) "two"
2) "2"
3) "three"
4) "3"
5) "four"
6) "4"

ZREVRANGE key start stop [WITHSCORES]

Returns the specified range of elements in the sorted set stored at key. The elements are considered to be ordered from the highest to the lowest score. Descending lexicographical order is used for elements with equal score. Apart from the reversed ordering, ZREVRANGE is similar to ZRANGE.

Return value

array: list of elements in the specified range (optionally with their scores).

Examples

ledis> ZADD myset 1 one 2 two 3 three 4 four
(integer) 4
ledis> ZREVRANGE myset 0 -1
1) "four"
2) "three"
3) "two"
4) "one"

ZREVRANGEBYSCORE key max min [WITHSCORES] [LIMIT offset count]

Returns all the elements in the sorted set at key with a score between max and min (including elements with score equal to max or min). In contrary to the default ordering of sorted sets, for this command the elements are considered to be ordered from high to low scores. The elements having the same score are returned in reverse lexicographical order. Apart from the reversed ordering, ZREVRANGEBYSCORE is similar to ZRANGEBYSCORE.

Return value

array: list of elements in the specified score range (optionally with their scores).

Examples

ledis>  ZADD myset 1 one 2 two 3 three 4 four
(integer) 4
ledis> ZREVRANGEBYSCORE myset +inf -inf
1) "four"
2) "three"
3) "two"
4) "one"
ledis> ZREVRANGEBYSCORE myset 2 1
1) "two"
2) "one"
ledis> ZREVRANGEBYSCORE myset 2 (1
1) "two"
ledis> ZREVRANGEBYSCORE myset (2 (1
(empty list or set)
ledis> ZREVRANGEBYSCORE myset +inf -inf WITHSCORES LIMIT 1 2
1) "three"
2) "3"
3) "two"
4) "2"

ZREVRANK key member

Returns the rank of member in the sorted set stored at key, with the scores ordered from high to low. The rank (or index) is 0-based, which means that the member with the highest score has rank 0. Use ZRANK to get the rank of an element with the scores ordered from low to high.

Return value

• If member exists in the sorted set, Integer reply: the rank of member.
• If member does not exist in the sorted set or key does not exist, Bulk string reply: nil.

Examples

127.0.0.1:6380> ZADD myset 1 one
(integer) 1
127.0.0.1:6380> ZADD myset 2 two
(integer) 1
127.0.0.1:6380> ZREVRANK myset one
(integer) 1
127.0.0.1:6380> ZREVRANK myset three
(nil)

ZSCORE key member

Returns the score of member in the sorted set at key. If member does not exist in the sorted set, or key does not exist, nil is returned.

Return value

bulk: the score of member (an int64 number), represented as string.

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZSCORE myset 'one'
1

ZCLEAR key

Delete the specified key

Return value

int64: the number of members in the zset stored at key

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZADD myset 2 'two'
(integer) 1
ledis> ZADD myset 3 'three'
(integer) 1
ledis> ZRANGE myset 0 -1
1) "one"
2) "two"
3) "three"
ledis> ZCLEAR myset
(integer) 3

ZMCLEAR key [key ...]

Delte multiple keys one time.

Return value

int64: the number of input keys

Examples

ledis> ZADD myset1 1 'one'
(integer) 1
ledis> ZADD myset2 2 'two'
(integer) 1
ledis> ZMCLEAR myset1 myset2
(integer) 2

ZEXPIRE key seconds

Set a timeout on key. After the timeout has expired, the key will be deleted.

Return value

int64:

• 1 if the timeout was set
• 0 if key does not exist or the timeout could not be set

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZEXPIRE myset 100
(integer) 1
ledis> ZTTL myset
(integer) 97
ledis> ZPERSIST myset
(integer) 1
ledis> ZTTL mset
(integer) -1
ledis> ZEXPIRE myset1 100
(integer) 0

ZEXPIREAT key timestamp

Set an expired unix timestamp on key. Similar to ZEXPIRE.

Return value

int64:

• 1 if the timeout was set
• 0 if key does not exist or the timeout could not be set

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZEXPIREAT myset 1404149999
(integer) 1
ledis> ZTTL myset
(integer) 7155
ledis> ZPERSIST myset
(integer) 1
ledis> ZTTL mset
(integer) -1
ledis> ZEXPIREAT myset1 1404149999
(integer) 0

ZTTL key

Returns the remaining time to live of a key that has a timeout. If the key was not set a timeout, -1 returns.

Return value

int64: TTL in seconds

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZEXPIRE myset 100
(integer) 1
ledis> ZTTL myset
(integer) 97
ledis> ZTTL myset2
(integer) -1

ZPERSIST key

Remove the existing timeout on key.

Return value

int64:

• 1 if the timeout was removed
• 0 if key does not exist or does not have an timeout

Examples

ledis> ZADD myset 1 'one'
(integer) 1
ledis> ZEXPIRE myset 100
(integer) 1
ledis> ZTTL myset
(integer) 97
ledis> ZPERSIST myset
(integer) 1
ledis> ZTTL mset
(integer) -1

Bitmap

BSETBIT key offset value

Sets or clear the bit at offset in the binary data sotred at key. The bit is either set or cleared depending on value, which can be either 0 or 1. The offset argument is required to be qual to 0, and smaller than 2^23 (this means bitmap limits to 8MB).

Return value

int64 : the original bit value stored at offset.

Examples

ledis> BSETBIT flag 0 1
(integer) 0
ledis> BSETBIT flag 0 0
(integer) 1
ledis> BGETBIT flag 0 99
ERR invalid command param

BGETBIT key offset

Returns the bit value at offset in the string value stored at key. When offset beyond the data length, ot the target data is not exist, the bit value will be 0 always.

Return value

int64 : the bit value stored at offset.

Examples

ledis> BSETBIT flag 1024 1
(integer) 0
ledis> BGETBIT flag 0
(integer) 0
ledis> BGETBIT flag 1024
(integer) 1
ledis> BGETBIT flag 65535
(integer) 0

BCOUNT key [start end]

Count the number of set bits in a bitmap.

Return value

int64 : The number of bits set to 1.

Examples

BGET key

Returns the whole binary data stored at key.

Return value

bulk: the raw value of key, or nil when key does not exist.

Examples

BEXPIRE key seconds

(refer to EXPIRE api for other types)

BEXPIREAT key timestamp

(refer to EXPIREAT api for other types)

BTTL key

(refer to TTL api for other types)

BPERSIST key

(refer to PERSIST api for other types)

Replication

SLAVEOF host port

Changes the replication settings of a slave on the fly. If the server is already acting as slave, SLAVEOF NO ONE will turn off the replication.

SLAVEOF host port will make the server a slave of another server listening at the specified host and port.

If a server is already a slave of a master, SLAVEOF host port will stop the replication against the old and start the synchronization against the new one, discarding the old dataset.

FULLSYNC

Inner command, starts a fullsync from the master set by SLAVEOF.

FULLSYNC will first try to sync all data from the master, save in local disk, then discard old dataset and load new one.

Return value

Examples

SYNC index offset

Inner command, syncs the new changed from master set by SLAVEOF at offset in binlog.index file.

Return value

Examples

Server

PING

Returns PONG. This command is often used to test if a connection is still alive, or to measure latency.

Return value

String

Examples

ledis> PING
PONG
ledis> PING
dial tcp 127.0.0.1:6665: connection refused
ledis>

ECHO message

Returns message.

Return value

bulk string reply

Examples

ledis> ECHO "hello"
hello

SELECT index

Select the DB with having the specified zero-based numeric index. New connections always use DB 0. Currently, We support 16 DBs(0-15).

Return value

Simple string reply

Examples

ledis> SELECT 2
OK
ledis> SELECT 15
OK
ledis> SELECT 16
ERR invalid db index 16

Thanks doctoc