e0039da2e4
cmd/revid-cli & revid: moved ringBuffer to earlier in pipeline
...
Removed packetization flag for revid-cli as no longer required.
Packetization will be decided based on outputs.
Removed buffer type definition and Write receiver func in
mtsSender_test.go as this is now defined in revid.go.
Made ringbuffer size and element size consisten no matter the
output methods, as we're now going to only be putting h264 in there.
Modified H264 lex function to take an io.Writer rather than an
Encoder.
Removed destination []loadSender slice from revids fields and
added an encoder []stream.Encoder slice to hold encoders used
during a particular configuration. Each encoder will write to
the desired outputs.
Modified logic regarding encoder and sender setup. We now check
what outputs we have and add encoders to revid's encoder slice
depending on what each output requires.
Modified outputClips routine such that it ranges through revid's
encoders and encodes to them. They then write to the senders and
they handle logic regarding the amount of data they send out
and when. They also handle actions to perform on send failures.
Wrote multiSender struct which will be written to from encoders.
It will then use it's senders to distribute the data accordingly
to senders that work with the encoding from said encoders.
Modified senders so that their load methods no longer take ring
chunks, but rather slices.
Modified senders such that their release methods no longer
perform chunk closing.
2019-03-09 15:28:07 +10:30
0962b1047d
revid: removed udp sender and anything pertainent to it
2019-03-07 20:14:50 +10:30
6fa9f37972
revid: remove ffmpegSender and any code pertaining to it.
2019-03-07 19:15:39 +10:30
d9ca76159e
Merge branch 'master' into mts-chunking
2019-03-04 15:01:41 +10:30
8606320731
revid: ignoring rtmp.ErrInvalidFlvTag error and checking that rtmp conn is not closed before we try to close it
2019-03-03 18:24:54 +10:30
b1dcb9d6a7
gofmt
2019-03-03 07:11:35 +00:00
32280cb9d6
Declare error.
2019-03-03 07:09:50 +00:00
c15c57f15f
Don't fail if Close() returns an error, since it just means there is no connection, and don't call Close when Dial fails.
2019-03-03 07:04:33 +00:00
2570cb6ecb
revid: simplified some mtsSender logic
2019-03-01 15:14:01 +10:30
ff4778945e
revid: not doing redundant conversions
2019-03-01 14:48:26 +10:30
b1b5ff2f49
revid: fixed import stanzas in senders.go
2019-03-01 13:30:06 +10:30
5eb832e6c3
revid: cleaned up documentation in senders.go and mtsSender_test.go
2019-03-01 13:28:34 +10:30
74110dee31
revid: sender interface renamed to Sender and tstSender in mtsSender_test.go renamed to sender
2019-03-01 10:16:54 +10:30
ae4debd388
revid & stream/mts: fixed file headers regarding licensing location
2019-03-01 10:00:33 +10:30
ee915b58ac
stream/mts: fixed conflict
2019-02-28 16:47:24 +10:30
01d85af133
Removed incorrect Close upon Dial error.
2019-02-22 20:45:13 +00:00
819c9a784c
revid: mtsSender_test.go passing segmenting and discontinuity tests
2019-02-17 05:32:44 +10:30
3f3d587eeb
revid: mtsSender test for segmenting actually working now
2019-02-17 03:35:59 +10:30
a5cb1c5abb
stream/mts: made modifications such that the segment test is passing
2019-02-16 23:52:40 +10:30
bb091f5961
revid: wrote test for mtsSender_test.go to see if the mtsSender is segmenting properly
2019-02-16 16:33:39 +10:30
361f5edbc9
stream/mts: wrote sender interface and a minimalHttpSender type
2019-02-16 14:26:51 +10:30
281aa47fd5
stream/mts: fixing discontinuities that could be caused by ringbuffer
2019-02-16 01:40:35 +10:30
bea0000340
stream/mts: creating ring.Chunk so that we can use another loadSender
2019-02-15 23:55:51 +10:30
b6bf41b17d
stream/mts: made mtsSender more general
...
The mtsSender can now use any loadSender to send fixed and segmented mts data to.
2019-02-15 23:35:45 +10:30
31d36577b1
stream/mts: ausOceanSender => mtsSender
2019-02-15 23:17:13 +10:30
3aa94887eb
revid/senders.go: commenting of ausOceanSender
2019-02-15 14:33:18 +10:30
7d03830a4e
revid & stream/mts: senders now handle clip duration and cc fixing for mts.
...
Removed rtpSender as we now put in loadSender slice. Removed packer write method as no longer required to do clip duration logic. For initialisation of encoders, they are now no longer writing
to packer, but now straight to the ring buffer. Wrote ausOceanSender which will deal with clip logic and cc fixing for mts. Added some functionality to mts/mpegts.go that allows adding
of adaptation fields to mts packets.
2019-02-15 12:01:07 +10:30
1f1546a284
revid: updated code in senders.go to work with meta changes
2019-01-31 21:30:08 +10:30
fd903b4add
rtmp.Session now rtmp.Conn and rtmp.NewSession() and Open() replaced with Dial().
2019-01-19 13:10:38 +10:30
ddb8fc1e1c
Merged in rtp-ringbuff-bypass (pull request #88 )
...
Rtp ringbuff bypass
Approved-by: Alan Noble <anoble@gmail.com>
Approved-by: kortschak <dan@kortschak.io>
2019-01-16 23:22:18 +00:00
9ca7288622
psi: removed conflict with master
2019-01-11 13:17:14 +10:30
0d6aac0247
revid: fixed build errors by updating calls to mts.MetaData.SetLocation() and mts.MetaData.SetTimeStamp()
2019-01-11 11:53:41 +10:30
ebd6d5816d
psi: full stop at end of comment, made lastTime belong to packer and moved some vars to a more appropriate location
2019-01-08 19:39:22 +10:30
cbe6149c8f
Added proper logging.
2019-01-07 23:59:41 +10:30
703f0a0523
revid: cleaned up send logic in httpSender send func
2019-01-07 10:45:22 +10:30
26a43d54bb
rtp: updated error message to suit new rtpSender.send() function
2019-01-03 13:01:35 +10:30
5f20086440
rtp: removed code in rtpSender relating to chunks - something we're not using anymore in this case
2019-01-03 12:57:50 +10:30
4da0bddf2f
revid: improved error message in rtpSender.send when there is no data provided but also when there is no data in the senders chunk
2019-01-03 12:08:41 +10:30
a934e02e9a
revid: using switch in rtpSender.send logic rather than if-else
2019-01-03 12:06:51 +10:30
12c8c604e0
Updating branch with master
...
Merge branch 'master' into rtp-ringbuff-bypass
2019-01-03 11:57:48 +10:30
a4c73cf6c5
av: updated logging to suit changes made on iot and utils
2019-01-02 15:39:47 +10:30
d0d9e20c87
revid: if no data is provided to rtpSender.send() then we check if the rtpSenders chunk is not nil, if it is, then return error
2019-01-01 16:11:32 +10:30
ccd4c32ff6
revid: revid now has it's own rtpSender seperate from the loadSender slice used for multiple outputs, therefore, we can now bypass the ringbuffer in this case with a check if the rtpSender exists in the packer write method
2019-01-01 16:03:04 +10:30
1e3b4b1ab8
cmd/revid-cli,revid: reduce stringly typing in config/flags
2018-12-28 13:43:21 +10:30
c7f55c3c43
revid: using NewJSONDecoder rather than newJsonDecoder to be consistent with changes in iot
2018-12-14 16:58:02 +10:30
fbdce669e7
revid: cleaned and added commenting
2018-12-14 16:46:36 +10:30
21dd2f4b70
revid: using location instead of gps in names
2018-12-14 16:02:47 +10:30
e79f6d191d
revid: made extractMeta a function of httpSender
2018-12-14 16:01:10 +10:30
f1ee09ad7b
revid: improved naming of encoder globals for location and timestamp
2018-12-14 15:59:44 +10:30
798add533b
revid + mts +psi: wrote func to find pmt in byte slice, wrote func to get gps, changed the way in which psi are insterted, based no of mpgets packets to send on time, i.e. per second
2018-12-14 13:35:56 +10:30
Saxon