Commit Graph

306 Commits

Author SHA1 Message Date
Saxon 2640b1b615 Merge branch 'h264-rtp-lexer' 2019-06-07 02:00:41 +09:30
Saxon ce457e1d95 should have been in last commit 2019-06-07 02:00:31 +09:30
Saxon Milton 499a26c09f Merged in h264-rtp-lexer (pull request )
codec/h264: added RTPLexer

Approved-by: Alan Noble <anoble@gmail.com>
2019-06-06 16:02:04 +00:00
Saxon b6e5414c8a revid: fixed merge conflicts 2019-05-27 15:15:26 +09:30
Saxon 1df0d214c9 revid/revid.go: fixed merge conflicts 2019-05-27 15:00:41 +09:30
Saxon 809d904878 revid/revid.go: commented startRTSPCamera 2019-05-23 14:10:09 +09:30
Saxon 722ddc6ccb codec/h264/lex_test.go: added test for RTPLexer.Lex(...) and also fixed some build errors 2019-05-22 14:49:25 +09:30
Saxon d29141cf05 container/mts: changed consts H264, H265 and Audio to EncodeH264, EncodeH265 and EncodeAudio 2019-05-21 16:57:17 +09:30
Saxon eeaf806c6e protocol/rtcp/client.go & revid/revid.go: removed rtcp.Client.Done() and now blocking on rtcp.Client.Err() in revid.
It seems unnecessary to have the rtcp.Client.Done() func, considering that we could use
the rtcp.Client.err channel itself to determine if the RTCP client has been stopped.
We simple wait on a chan receive in revid in the error handling routine, and we check the
'ok' return - if it is false, then the err chan has been closed and we can get out of the
error handling loop. This should also reduce CPU usage significantly.
2019-05-21 13:23:04 +09:30
Saxon 88ffdf08b5 revid: changed the input enum for RTSP input from RTSPCamera to RTSP 2019-05-21 12:18:52 +09:30
Saxon 91d2697a55 revid: general clean up 2019-05-21 01:48:29 +09:30
Saxon 3ff726e439 revid & cmd/revid-cli: removed need for command line flags to specify addresses for RTP and RTCP.
Removed the command line flags that were used to specifiy local and remote addresses for RTP and RTCP. These are now
derived from the initial RTSP connection and also from the RTSP SETUP method reply.
2019-05-20 19:45:59 +09:30
Saxon bc6a0ae55e revid: using RTCP client to maintain RTP stream from RTSP server
Now adopting an RTCP client so that the RTP stream from the RTSP server can be maintained past 1 minute.
This change involved some refactor.
The rtcp.NewClient signature has been simplified. There is now a default send interval and name for use
in the source description in the receiver reports. These can be customised if required with the new
SetSendInterval and SetName funcs. The rtcp.NewClient signature now takes an rtp.Client, so that it
can get information from the RTP stream, like most recent sequence number. As a result of this requirement
the rtp package parse file has been extended with some functions for parsing out the sequence number and
ssrc from RTP packets and the RTP client provides getters for these things.
2019-05-20 18:14:27 +09:30
Saxon Milton eaba622909 Merged in separate-codecs (pull request )
codec: created h264 and mjpeg packages to house lexers

Approved-by: Alan Noble <anoble@gmail.com>
2019-05-19 11:46:33 +00:00
Saxon 548b7caa81 revid: fixed rtpPort and rtcpPort parsing and added H264 and H265 IDs
Added H264ID and H265ID consts and added logic to select this const for use in encoder based on mediaType param in NewEncoder. Also now
declaring PMT in NewEncoder so that we can set streamID correctly based on mediaType.
2019-05-16 13:57:10 +09:30
Saxon 25bb49bce7 revid: using h265 lexer now in the case of RTSPCamera input 2019-05-14 11:56:04 +09:30
Saxon 1059b5e738 revid: wrote basics of a startRTSPCamera func
Currently just connecting to RTSP server, requesting OPTIONS, DESCRIBE, SETUP and PLAY. Also creating RTP client and giving
this to process from for the lexer.
2019-05-14 11:47:18 +09:30
Saxon 835f97203a revid: config fields that are exported and acronyms now capitalized. 2019-05-13 16:23:38 +09:30
Saxon 51fcb18505 revid: capitalize exported enums that are acronyms like Rtmp->RTMP, Mpegts->MPEGTS etc. 2019-05-13 16:18:41 +09:30
Saxon 5e568f277b revid/revid.go: fixed comment for Revid.setupInput field 2019-05-06 16:04:56 +09:30
Saxon 5c40c48e97 revid/revid.go: in Revid.Start() if errors occurs on call to Revid.setupInput() fall through error check and return err 2019-05-06 15:54:33 +09:30
Saxon 77ff88392f revid: setupInput function for revid now returns closure that is used to do any clean up 2019-05-06 15:12:05 +09:30
Saxon ec290f1058 revid: logging is now checked as a valid device so that logging level may be changed remotely 2019-05-05 19:39:56 +09:30
Saxon 32621f0cfe av: fixed build errors 2019-04-26 20:46:43 +09:30
Saxon b42278cfde revid: improved comment for Config() 2019-04-25 15:44:34 +09:30
Saxon 74379ea047 revid: simplified comments for Start, Stop and Update. 2019-04-24 13:00:20 +09:30
Saxon 9ba72fac62 av: addressing PR feedback 2019-04-22 15:14:08 +09:30
Saxon d76b60a515 revid: addressing PR feedback 2019-04-18 18:31:49 +09:30
Saxon 74c995d452 revid: addressing PR feedback 2019-04-18 16:55:48 +09:30
Saxon 1c5d3997bb revid: fixed indentation on Dan's name under authors 2019-04-18 16:21:18 +09:30
Saxon d18373908b revid: added ringBuffer to rtmpSender 2019-04-15 10:48:12 +09:30
Saxon d75ea20137 revid: applying some feedback from last PR 2019-04-15 10:25:35 +09:30
Saxon f59879b51d revid: removed ringBuffer after lexer
Now that we want buffered senders (as required), the ringBuffer that was after the
lexer has been removed. Instead, we now have an ioext.multiWriterCloser to which the
lexer writes to. This then writes to the encoders, and then encoders write to each of
their own multiWriteClosers, which write to the appropriate senders. We now call
close on the first multiWriteCloser to close down the entired pipeline, as this close
call propogates through each level.

We have removed the outputClips routine as it's not required anymore to get data
from the revid ringBuffer, and have removed other things that were used by this, like
the IsRunning function.

We have also updated tests to work with these changes - they are passing.
2019-04-15 08:42:56 +09:30
Saxon b347f2e9d1 revid: set revid.isRunning to false before waiting, because this is what triggers output routine to be killed. 2019-04-14 11:13:17 +09:30
Saxon 9b48d22392 av: fixed conflicts with master 2019-04-13 20:15:08 +09:30
Saxon 02287bfd80 revid: added more to setupPipeline comment regarding parameters: 2019-04-10 14:05:53 +09:30
Saxon bab1e62798 revid: don't return from revid.Stop() if a close of one of the senders fails 2019-04-10 12:57:28 +09:30
Saxon 850b45d791 revid: temp writeCloser wc in setupPipeline renamed to w 2019-04-10 12:22:41 +09:30
Saxon dd833afe2e revid: updated comment for setupPipeline 2019-04-10 12:13:08 +09:30
Saxon d3e3904e75 revid: commented Revid.writeClosers 2019-04-10 12:11:45 +09:30
Saxon 66622920d5 revid: Buffered MtsSender
The mtsSender now has a ringBuffer and tests have been updated accordingly. The mtsSender now uses an output routine to get data from it's ringBuffer to send.
 Revid now uses ioext.multiWriteClosers for encoders to write to so that senders can be closed and therefore any output routines.
2019-04-09 15:58:34 +09:30
Trek H 9fe3de5d65 mts: Changed uses of NewEncoder in revid and senders_test to use extra argument. 2019-04-09 14:00:56 +09:30
Saxon a061a79805 revid: don't need to make new r.encoder each time just do r.encoder = r.encoder[:0] 2019-04-03 11:36:49 +10:30
Saxon 9bd41b7c3b revid: simplified signature for setupPipeline and fixed commenting 2019-04-03 11:29:54 +10:30
Saxon dbcac80d1f revid: fixed some general commenting 2019-04-02 13:45:36 +10:30
Saxon 6b91746cf6 revid: removed multiSender and started using std io.multiWriter
We are now using an io.multiWriter rather than the multiSender. Code has been updated inside revid.go to account for this change, and tests have also been updated accordingly. Tests for
the multiSender have been removed. A dummyMultiWriter has been written to inject our own multiWriter during testing.
2019-04-02 13:21:46 +10:30
Saxon f17d2ffb8c revid: got rid of minimalHttpSender
Now that we're removing the concept of a loadSender, there is no need to have a minimalHttpSender (did not implement loadSender) and a httpSender (implemented loadSender). So we can now have
a single httpSender that implements io.Writer just like every other sender.
2019-04-01 12:07:28 +10:30
Saxon 8cc7f6e500 revid: improved some naming 2019-03-29 16:22:51 +10:30
Saxon 3896a5e804 revid: senders are now io.Writers
Added a Write method to senders such that they implement io.Writer. The multiSender now takes a slice of io.writers.
Also modified revid code and tests to account for this chance.
2019-03-29 12:49:26 +10:30
Saxon 937f54f418 av: fixed conflicts with master 2019-03-28 11:03:05 +10:30