96c1b51173
revid and audio: seperated audio into own package
...
audio device input is now handle in its own package which resides in the new input directory
a list of codecs was added to codecutil package to help with multiple packages using the same codecs
2019-06-06 02:09:55 +09:30
7b4daed4a6
revid: added metadata to audio mts streams
2019-06-05 15:08:47 +09:30
bea747085f
revid: updated lex funcs in tests, changed audioDevice logger
...
Since adding the extra bufSize arg to Lex functions, the test functions using them needed to be updated.
NewAudioDevice was changed to accept a logger to log to instead of creating a new one.
2019-06-04 12:28:40 +09:30
90c34c4108
revid: fixed issues after merge
2019-06-03 18:35:28 +09:30
3d7539c6df
Merge branch 'master' into revid-audio
2019-06-03 17:50:48 +09:30
c2b5ee0574
revid: simplified audio device read write concurrency
2019-05-29 02:06:58 +09:30
b6e5414c8a
revid: fixed merge conflicts
2019-05-27 15:15:26 +09:30
1df0d214c9
revid/revid.go: fixed merge conflicts
2019-05-27 15:00:41 +09:30
809d904878
revid/revid.go: commented startRTSPCamera
2019-05-23 14:10:09 +09:30
dd66c58f40
revid: concurrency and testing
...
fixed a situation where a deadlock can occur and also found and fixed some issues while testing different initialisations on AudioDevice.
2019-05-23 00:19:44 +09:30
722ddc6ccb
codec/h264/lex_test.go: added test for RTPLexer.Lex(...) and also fixed some build errors
2019-05-22 14:49:25 +09:30
d29141cf05
container/mts: changed consts H264, H265 and Audio to EncodeH264, EncodeH265 and EncodeAudio
2019-05-21 16:57:17 +09:30
eeaf806c6e
protocol/rtcp/client.go & revid/revid.go: removed rtcp.Client.Done() and now blocking on rtcp.Client.Err() in revid.
...
It seems unnecessary to have the rtcp.Client.Done() func, considering that we could use
the rtcp.Client.err channel itself to determine if the RTCP client has been stopped.
We simple wait on a chan receive in revid in the error handling routine, and we check the
'ok' return - if it is false, then the err chan has been closed and we can get out of the
error handling loop. This should also reduce CPU usage significantly.
2019-05-21 13:23:04 +09:30
c58c573cd7
revid: changed writeRates and recPeriods to floats
2019-05-21 12:39:10 +09:30
88ffdf08b5
revid: changed the input enum for RTSP input from RTSPCamera to RTSP
2019-05-21 12:18:52 +09:30
91d2697a55
revid: general clean up
2019-05-21 01:48:29 +09:30
7ba9d023a3
revid: made start and stop change audio device state
2019-05-21 00:45:54 +09:30
3ff726e439
revid & cmd/revid-cli: removed need for command line flags to specify addresses for RTP and RTCP.
...
Removed the command line flags that were used to specifiy local and remote addresses for RTP and RTCP. These are now
derived from the initial RTSP connection and also from the RTSP SETUP method reply.
2019-05-20 19:45:59 +09:30
bc6a0ae55e
revid: using RTCP client to maintain RTP stream from RTSP server
...
Now adopting an RTCP client so that the RTP stream from the RTSP server can be maintained past 1 minute.
This change involved some refactor.
The rtcp.NewClient signature has been simplified. There is now a default send interval and name for use
in the source description in the receiver reports. These can be customised if required with the new
SetSendInterval and SetName funcs. The rtcp.NewClient signature now takes an rtp.Client, so that it
can get information from the RTP stream, like most recent sequence number. As a result of this requirement
the rtp package parse file has been extended with some functions for parsing out the sequence number and
ssrc from RTP packets and the RTP client provides getters for these things.
2019-05-20 18:14:27 +09:30
eaba622909
Merged in separate-codecs (pull request #188 )
...
codec: created h264 and mjpeg packages to house lexers
Approved-by: Alan Noble <anoble@gmail.com>
2019-05-19 11:46:33 +00:00
548b7caa81
revid: fixed rtpPort and rtcpPort parsing and added H264 and H265 IDs
...
Added H264ID and H265ID consts and added logic to select this const for use in encoder based on mediaType param in NewEncoder. Also now
declaring PMT in NewEncoder so that we can set streamID correctly based on mediaType.
2019-05-16 13:57:10 +09:30
76edcfe8ed
revid: added start and stop functions to AudioInput for proper closing
2019-05-15 15:57:49 +09:30
25bb49bce7
revid: using h265 lexer now in the case of RTSPCamera input
2019-05-14 11:56:04 +09:30
1059b5e738
revid: wrote basics of a startRTSPCamera func
...
Currently just connecting to RTSP server, requesting OPTIONS, DESCRIBE, SETUP and PLAY. Also creating RTP client and giving
this to process from for the lexer.
2019-05-14 11:47:18 +09:30
835f97203a
revid: config fields that are exported and acronyms now capitalized.
2019-05-13 16:23:38 +09:30
51fcb18505
revid: capitalize exported enums that are acronyms like Rtmp->RTMP, Mpegts->MPEGTS etc.
2019-05-13 16:18:41 +09:30
e699c30a85
revid: updated documentation and licenses
2019-05-08 19:31:25 +09:30
9099082609
revid: setting up mts encoder with pid based on media type
2019-05-08 19:05:00 +09:30
faa6246a51
Merge branch 'master' into revid-audio
2019-05-08 16:23:56 +09:30
7d4da08cf0
revid: audio lexer reading and writing correct bytes
2019-05-07 16:52:58 +09:30
5e568f277b
revid/revid.go: fixed comment for Revid.setupInput field
2019-05-06 16:04:56 +09:30
5c40c48e97
revid/revid.go: in Revid.Start() if errors occurs on call to Revid.setupInput() fall through error check and return err
2019-05-06 15:54:33 +09:30
77ff88392f
revid: setupInput function for revid now returns closure that is used to do any clean up
2019-05-06 15:12:05 +09:30
ec290f1058
revid: logging is now checked as a valid device so that logging level may be changed remotely
2019-05-05 19:39:56 +09:30
a3c7cb5616
revid: added chunkSize to audioInput and bufferSize to lex functions
...
The audio lexers need to know how much data they will be receiving unlike video which has a fixed buffer size.
This means that all the lex function will need to be given a buffer size since they are used as a function pointer with the same signature.
2019-05-05 17:56:14 +09:30
32621f0cfe
av: fixed build errors
2019-04-26 20:46:43 +09:30
b42278cfde
revid: improved comment for Config()
2019-04-25 15:44:34 +09:30
b1e5b4341f
revid: pid for audio being written to mts packets
2019-04-24 16:39:18 +09:30
3484e35692
revid: revid building and running with audio additions
2019-04-24 13:58:56 +09:30
74379ea047
revid: simplified comments for Start, Stop and Update.
2019-04-24 13:00:20 +09:30
889d440259
revid: updated audio config parameters throughout audio-input.go to use revid.Config
2019-04-24 11:46:00 +09:30
c51e0ec168
revid: adding audio config parameters
2019-04-23 19:05:47 +09:30
20c9e6c409
revid: added PCM and ADPCM codecs
2019-04-23 16:20:47 +09:30
9ba72fac62
av: addressing PR feedback
2019-04-22 15:14:08 +09:30
46ca3e2611
revid: created an audioInput struct to record audio that acts as a reader for revid
2019-04-19 01:20:48 +09:30
d76b60a515
revid: addressing PR feedback
2019-04-18 18:31:49 +09:30
74c995d452
revid: addressing PR feedback
2019-04-18 16:55:48 +09:30
1c5d3997bb
revid: fixed indentation on Dan's name under authors
2019-04-18 16:21:18 +09:30
e0ec6a8dc9
revid: added basic PCM lexer and started adding startMic() func to revid setup.
2019-04-17 23:11:23 +09:30
d18373908b
revid: added ringBuffer to rtmpSender
2019-04-15 10:48:12 +09:30
d75ea20137
revid: applying some feedback from last PR
2019-04-15 10:25:35 +09:30
f59879b51d
revid: removed ringBuffer after lexer
...
Now that we want buffered senders (as required), the ringBuffer that was after the
lexer has been removed. Instead, we now have an ioext.multiWriterCloser to which the
lexer writes to. This then writes to the encoders, and then encoders write to each of
their own multiWriteClosers, which write to the appropriate senders. We now call
close on the first multiWriteCloser to close down the entired pipeline, as this close
call propogates through each level.
We have removed the outputClips routine as it's not required anymore to get data
from the revid ringBuffer, and have removed other things that were used by this, like
the IsRunning function.
We have also updated tests to work with these changes - they are passing.
2019-04-15 08:42:56 +09:30
b347f2e9d1
revid: set revid.isRunning to false before waiting, because this is what triggers output routine to be killed.
2019-04-14 11:13:17 +09:30
9b48d22392
av: fixed conflicts with master
2019-04-13 20:15:08 +09:30
02287bfd80
revid: added more to setupPipeline comment regarding parameters:
2019-04-10 14:05:53 +09:30
bab1e62798
revid: don't return from revid.Stop() if a close of one of the senders fails
2019-04-10 12:57:28 +09:30
850b45d791
revid: temp writeCloser wc in setupPipeline renamed to w
2019-04-10 12:22:41 +09:30
dd833afe2e
revid: updated comment for setupPipeline
2019-04-10 12:13:08 +09:30
d3e3904e75
revid: commented Revid.writeClosers
2019-04-10 12:11:45 +09:30
66622920d5
revid: Buffered MtsSender
...
The mtsSender now has a ringBuffer and tests have been updated accordingly. The mtsSender now uses an output routine to get data from it's ringBuffer to send.
Revid now uses ioext.multiWriteClosers for encoders to write to so that senders can be closed and therefore any output routines.
2019-04-09 15:58:34 +09:30
9fe3de5d65
mts: Changed uses of NewEncoder in revid and senders_test to use extra argument.
2019-04-09 14:00:56 +09:30
a061a79805
revid: don't need to make new r.encoder each time just do r.encoder = r.encoder[:0]
2019-04-03 11:36:49 +10:30
9bd41b7c3b
revid: simplified signature for setupPipeline and fixed commenting
2019-04-03 11:29:54 +10:30
dbcac80d1f
revid: fixed some general commenting
2019-04-02 13:45:36 +10:30
6b91746cf6
revid: removed multiSender and started using std io.multiWriter
...
We are now using an io.multiWriter rather than the multiSender. Code has been updated inside revid.go to account for this change, and tests have also been updated accordingly. Tests for
the multiSender have been removed. A dummyMultiWriter has been written to inject our own multiWriter during testing.
2019-04-02 13:21:46 +10:30
f17d2ffb8c
revid: got rid of minimalHttpSender
...
Now that we're removing the concept of a loadSender, there is no need to have a minimalHttpSender (did not implement loadSender) and a httpSender (implemented loadSender). So we can now have
a single httpSender that implements io.Writer just like every other sender.
2019-04-01 12:07:28 +10:30
8cc7f6e500
revid: improved some naming
2019-03-29 16:22:51 +10:30
3896a5e804
revid: senders are now io.Writers
...
Added a Write method to senders such that they implement io.Writer. The multiSender now takes a slice of io.writers.
Also modified revid code and tests to account for this chance.
2019-03-29 12:49:26 +10:30
937f54f418
av: fixed conflicts with master
2019-03-28 11:03:05 +10:30
5366eca2f2
av: fixed imports
2019-03-25 11:51:03 +10:30
e7c6b7319b
revid: sender any logic that is performed on a failed send is now done inside loadSender.send()
2019-03-24 20:01:25 +10:30
fa011fb129
Merge branch 'master' into ringbuffer-move
2019-03-17 12:13:13 +10:30
01a5759bde
revid: changed remote param label for auto white balance from Awb to AutoWhiteBalance
2019-03-17 09:51:09 +10:30
1533d6a7ff
stream: got rid of Encoder interface as not needed anymore considering our encoders just implement io.Writer now
2019-03-16 15:46:33 +10:30
aa888ef115
revid: restructured revid.reset code to make more flexible for testing purposes.
2019-03-16 15:16:06 +10:30
39a7b382f6
revid: fixed build errors
2019-03-15 18:05:15 +10:30
524989d2ed
revid: resolved conflicts
2019-03-15 17:51:17 +10:30
9d5771fcbf
revid: completed addition of exposure, awb, saturation and brightness options
2019-03-15 17:24:29 +10:30
9a510f5c31
cmd/revid-cli & revid: adding raspivid exposure and brightness parameters
...
Started working on adding exposure, brightness, saturation and awb flags to revid-cli so that we can control raspivid parameters.
Updated revid logic to give these to raspivid and updated config to consider these parameters in config validation.
2019-03-15 12:44:13 +10:30
4d7f2d7b32
revid: further fixed logic in revid.reset encodersender setup
2019-03-14 14:43:55 +10:30
d2411a0761
revid: param label RtpAddr => RtpAddress
2019-03-14 14:16:55 +10:30
cbe4e52c11
revid: var label RtpAddr => RtpAddress
2019-03-14 14:11:38 +10:30
b7ef1a1a2b
revid: improved error handling in revid.reset encoder/sender setup logic
2019-03-14 13:44:33 +10:30
9b3a1d0ae7
revid: multiSender is no longer a struct, but rather a type derived from a []loadSender
2019-03-14 11:20:02 +10:30
99a4010c79
revid: removed concept of send retry for now
...
Send retry has been removed from the multiSender. This also means there is not need for the active func, because we simply wait until the send is complete or failed to exit the output clips
routine. Tests pertinent to retrying or the active function have been removed.
2019-03-14 10:35:09 +10:30
2e49de5fa0
revid: newMultiSender panics if active function is not provided
2019-03-14 08:34:35 +10:30
e593a04faf
revid: added TestResetEncoderSenderSetup
...
Added a test to check that revid's reset method is correctly setting up encoders
and the senders they write to correctly.
2019-03-13 18:14:00 +10:30
627297ce7e
revid: using chunk.WriteTo rather than chunk.Bytes to get data to encoders
2019-03-13 12:25:57 +10:30
500edc05aa
revid: retry is now an attribute of senders and can be set at initialisation
2019-03-12 20:53:27 +10:30
53382c5774
revid: newMultiSender returns error if the passed active function is nil
2019-03-12 15:39:51 +10:30
e2a6d9f4bd
revid: added function type called active to multiSender
...
We wish to have a way to check that the 'owner' of the multi sender is still active while it may be doing continual send retries - therefore a function with bool return called active has been added
as a field to multiSender so that we can call this and check whether the owner of the multiSender is 'active' or not.
2019-03-12 15:32:01 +10:30
0ca75538d2
revid: created multiSender retry field and setting based on outputs
...
Added a retry field for the multiSender which will be used to decide whether to retry sending or not. This is being set true if we have a http sender and no other senders.
2019-03-12 15:18:02 +10:30
1c75867ba5
revid: simplified logic for setup of senders and encoders in revid.reset
2019-03-12 12:59:10 +10:30
a726acf520
revid: enc=>e
2019-03-12 03:05:36 +10:30
652a5ab173
revid: made logic regarding sender and encoder selection more readable, and added more commenting
2019-03-12 03:01:43 +10:30
9f4f9e8920
revid: Encoder type now implements io.Writer
2019-03-10 13:00:58 +10:30
def220daf3
revid: sending encode errors to errorHandler and made multiSender smarter
...
Errors captured from encoding are now sent to the error handler.
We also made multiSender smart so that during a write if sendRetry is on, we first check
that revid is actually running before attempting to send again. If revid is not running we return.
We also now log any send errors inside multiSender.
2019-03-10 12:34:45 +10:30
fc72eeaa0f
revid: improved commenting
2019-03-10 12:21:53 +10:30
93e856792d
cmd/revid-cli & revid: fixed conflict
2019-03-09 15:54:52 +10:30
e0039da2e4
cmd/revid-cli & revid: moved ringBuffer to earlier in pipeline
...
Removed packetization flag for revid-cli as no longer required.
Packetization will be decided based on outputs.
Removed buffer type definition and Write receiver func in
mtsSender_test.go as this is now defined in revid.go.
Made ringbuffer size and element size consisten no matter the
output methods, as we're now going to only be putting h264 in there.
Modified H264 lex function to take an io.Writer rather than an
Encoder.
Removed destination []loadSender slice from revids fields and
added an encoder []stream.Encoder slice to hold encoders used
during a particular configuration. Each encoder will write to
the desired outputs.
Modified logic regarding encoder and sender setup. We now check
what outputs we have and add encoders to revid's encoder slice
depending on what each output requires.
Modified outputClips routine such that it ranges through revid's
encoders and encodes to them. They then write to the senders and
they handle logic regarding the amount of data they send out
and when. They also handle actions to perform on send failures.
Wrote multiSender struct which will be written to from encoders.
It will then use it's senders to distribute the data accordingly
to senders that work with the encoding from said encoders.
Modified senders so that their load methods no longer take ring
chunks, but rather slices.
Modified senders such that their release methods no longer
perform chunk closing.
2019-03-09 15:28:07 +10:30
cfb4946588
Merged in video-rotate (pull request #158 )
...
Video rotate
Approved-by: Alan Noble <anoble@gmail.com>
2019-03-08 23:33:40 +00:00
0962b1047d
revid: removed udp sender and anything pertainent to it
2019-03-07 20:14:50 +10:30
6fa9f37972
revid: remove ffmpegSender and any code pertaining to it.
2019-03-07 19:15:39 +10:30
a7ae1aa643
revid: fixed raspivid flag usage for vertical and horizontal flipping - tested and working
2019-03-06 01:38:13 +00:00
3a9e90dcf8
cmd/revid-cli & revid: added back vertical and horizontal flip options
2019-03-06 11:51:55 +10:30
768ea3a007
Merged in csv-output-var (pull request #160 )
...
revid: handling csv output var in revid's update function
Approved-by: Alan Noble <anoble@gmail.com>
2019-03-05 06:44:27 +00:00
79d0dad757
revid: checking for changes to rtp address in vars now
2019-03-05 16:38:32 +10:30
003808858b
revid: handling csv output var in revid's update function
2019-03-05 10:50:31 +10:30
d9ca76159e
Merge branch 'master' into mts-chunking
2019-03-04 15:01:41 +10:30
0767f41d4a
revid: corrected spelling error in netreceiver var check
2019-03-04 01:52:39 +00:00
cfcb899bcb
revid & cmd/revid-cli: rotate => rotation
2019-03-04 12:11:34 +10:30
2d229077a2
revid & cmd/revid-cli: removed any mention of horizontal and vertical flip and replaced with rotate
2019-03-04 12:07:28 +10:30
c60ec9fbd8
revid: moved messaged regarding restart of rtmp session
2019-03-03 16:41:16 +10:30
b92466bab8
revid: defaulting to sendRetry on for Rtmp output
2019-03-03 16:38:03 +10:30
b5954d3f53
revid: if start not successfull stop is called to stop output clips routine
2019-03-03 13:46:02 +10:30
cb206ff92b
revid: adjust ringBuffer element size for flv
2019-03-03 13:35:25 +10:30
e0c7f3074d
revid: corrected conflict
2019-03-02 20:41:19 +10:30
c07946fa76
revid: fixed conflict
2019-03-02 17:46:20 +10:30
5dd3045db2
revid: checking that we have more than 0 destinations before we write to the ring buffer
2019-03-02 13:08:48 +10:30
c3f846379d
revid: removed in response to error in log message in handleErrors if failed to start() revid
2019-03-02 12:50:43 +10:30
4e1ceb140d
revid: if start is called when revid is already running an error is no longer returned
2019-03-02 12:49:09 +10:30
c9996cbae5
revid: stop() no longer returns error, just logs if stop is called when revid is not running.
2019-03-02 12:42:36 +10:30
abe9722350
revid: relaxed error handling in handleErrors routine
2019-03-01 21:01:33 +10:30
ee915b58ac
stream/mts: fixed conflict
2019-02-28 16:47:24 +10:30
b6a3e062b5
Merged in path-flag-fix (pull request #143 )
...
revid: got rid of OutputFileName and InputFileName
2019-02-28 03:04:05 +00:00
8a13bb7007
Temporary fix: Make ringBufferSize size larger for RTMP to work over flaky networks.
2019-02-27 05:53:49 +00:00
796bc12e09
Merge branch 'master' into improve-defaulting
2019-02-25 18:43:16 +10:30
8240fea9ab
revid: fix build
2019-02-25 18:39:01 +10:30
7d3d8c3374
revid: change ring buffer size depending on output type
2019-02-25 18:36:39 +10:30
a90b35b319
Only log a debug message when ring.ErrTimeout occurs, not a warning.
2019-02-25 07:14:30 +00:00
5d5af5601f
revid: not closing destinations on call to revid.Reset() anymore
2019-02-25 17:00:31 +10:30
7f2d53e778
revid: now checking for Packetization var from netreceiver
2019-02-25 16:29:44 +10:30
b7d1bd17a7
revid: initialising ring buffer in different location
2019-02-25 16:03:28 +10:30
cc4d683ba6
revid: calling reset inside revid.Update once config is updated
2019-02-25 15:47:43 +10:30
5a2d89ef8f
revid: using only one output when we're getting config from netreceiver
2019-02-25 15:31:42 +10:30
e118a639d4
revid: outputting config when we update
2019-02-25 15:28:19 +10:30
f1625d27f5
revid: fixed destination slice bug
2019-02-17 13:11:17 +10:30
a5cb1c5abb
stream/mts: made modifications such that the segment test is passing
2019-02-16 23:52:40 +10:30
361f5edbc9
stream/mts: wrote sender interface and a minimalHttpSender type
2019-02-16 14:26:51 +10:30
b6bf41b17d
stream/mts: made mtsSender more general
...
The mtsSender can now use any loadSender to send fixed and segmented mts data to.
2019-02-15 23:35:45 +10:30
31d36577b1
stream/mts: ausOceanSender => mtsSender
2019-02-15 23:17:13 +10:30
d3a8bb20de
revid: using ausOceanSender if we're doing http output with mpegtrs packetization
2019-02-15 13:05:48 +10:30
7d03830a4e
revid & stream/mts: senders now handle clip duration and cc fixing for mts.
...
Removed rtpSender as we now put in loadSender slice. Removed packer write method as no longer required to do clip duration logic. For initialisation of encoders, they are now no longer writing
to packer, but now straight to the ring buffer. Wrote ausOceanSender which will deal with clip logic and cc fixing for mts. Added some functionality to mts/mpegts.go that allows adding
of adaptation fields to mts packets.
2019-02-15 12:01:07 +10:30
3ee2683ca9
cmd/revid-cli & revid: outputFileNamePtr => outputPathPtr, config.OutputFileName=>config.OutputPath, inputFileNamePtr=>inputPathPtr and finally, config.InputFileName=>config.InputPath
2019-02-12 18:22:46 +10:30
ad04893432
revid/revid.go: intialising err from rtp send
2019-02-08 18:14:33 +10:30
f4be7e72d7
Merge branch 'cpu-fix' of http://bitbucket.org/ausocean/av into cpu-fix
2019-02-08 18:12:29 +10:30
020428db62
revid/revid.go: checking err from ring buffer write within destinations length check
2019-02-08 18:12:03 +10:30
bc1cb5245a
Merged master into cpu-fix
2019-02-08 18:09:25 +10:30
3f72e21970
revid: reducing ring buffer size
2019-02-07 18:03:59 +10:30
ccb8a52db1
revid/revid.go: removing shorthand initialisations for vars already declared
2019-02-06 05:28:57 +00:00
87cb303935
revid/revid.go: again checking to see we actually have destinations before putting anything into the ring buffer
2019-02-06 05:27:35 +00:00
ef4aa8efd1
revid/revid.go: reverted change regarding putting things in ringbuffer when we won't use it
2019-02-06 15:52:59 +10:30
cdd6703930
}
2019-02-06 15:45:14 +10:30
de4f471201
revid/revid.go: defer r.wg.Done() in revid.outputClips routine
2019-02-05 10:50:21 +10:30
a4d179039b
revid/revid.go: removed default case in switch with revid.Update()
2019-02-05 10:49:05 +10:30
bd2958ba4e
cmd/revid-cli & revid: added TODO for the use of Run() instead of send in cmd/revid-cli/main.go. Fixed filename in revid/revid.go file header. Renamed ret to cfg in revid.Config(). Catching error from call to revid.Stop() in revid.Udate()
2019-02-04 19:14:02 +10:30
8978f9edc5
cmd/revid-cli & revid: using goto to sleep for monitor period, and using wg.Done() at the end of output routine.
2019-02-04 17:12:30 +10:30
ee7eb84d26
revid-cli: correctly using ns.Mode() and ns.SetMode()
2019-02-04 13:25:37 +10:30
6171c4e999
revid: added handling of burstPeriod to config
2019-02-03 23:43:51 +10:30
1010721dd0
cmd/revid-cli & revid: Checking revid mode differently - now using ns.Mode(), which should soon be an available feature. Also now using ns.SetMode() - which tells netreceiver that we've changed mode.
2019-02-03 23:37:38 +10:30
9095044e23
revid: using waitgroups so that revid.Stop() is safer - we can wait until the input and output routines are done before we do anything, like touch the revid config. Also started modifying revid.Update() to remove errors introduced after the copy of updateRevid from revid-cli to revid.go in the previous commit.
2019-02-03 21:55:40 +10:30
1af4b25030
cmd/revid-cli & revid: removed startRevid and stopRevid as shouldn't be required when we have revid.Start() and revid.Stop(). Created revid.Config() which returns copy of config safely using mutex. removed updateRevid in revid-cli and move to fun revid.Update() - as there's no reason why it can't just be a receiver func - even better considering we want to start moving alot of stuff from revid-cli to the revid-api anyways.
2019-02-03 21:17:44 +10:30
c44d6bbfd3
revid/revid.go: not during time.Duration conversion
2019-02-01 10:08:49 +10:30
9bddf343f5
revid/revid.go: moved revid.mu declaration
...
. Updated todo owner
2019-02-01 10:07:00 +10:30
d26aa8643a
revid: renamed transcode to processFrom. Using mutex for isRunning flag. Created setIsRunning func to set state of isRunning.
2019-02-01 09:47:31 +10:30
051263c144
revid/revid.go: revid.lex to revid.transcode
2019-01-31 19:58:25 +10:30
1e307fc37b
revid/revid.go: made routines named rather than anonymous
2019-01-31 19:42:20 +10:30
e18b1f51f0
revid/revid.go: capture error from r.Start() in error handling routine
2019-01-31 15:49:44 +10:30
d53eafe215
revid/revid.go: not running r.setupInput() as routine - now getting error an returning
2019-01-31 15:15:38 +10:30
ed4d97f893
stream/mts: patch for revid.Start() no exit bug
2019-01-31 15:03:50 +10:30
58102e5587
revid: fix http destination assignment
2019-01-30 13:19:00 +10:30
071e6fd0f7
revid: honour difference between rtmp dst and others
2019-01-29 19:56:02 +10:30
92ba9c89a2
cmd/revid-cli,revid: use a slice for output destination flags
2019-01-19 20:01:42 +10:30
35d63f664f
revid: add v4l properties and fix default device handling
...
Also fix logging typos found during work.
2019-01-17 17:04:59 +10:30
ddb8fc1e1c
Merged in rtp-ringbuff-bypass (pull request #88 )
...
Rtp ringbuff bypass
Approved-by: Alan Noble <anoble@gmail.com>
Approved-by: kortschak <dan@kortschak.io>
2019-01-16 23:22:18 +00:00
a58a784a16
Merged in clean-up-revid-consts (pull request #111 )
...
revid: clean up some revid constants
Approved-by: kortschak <dan@kortschak.io>
2019-01-16 07:37:07 +00:00
95349f461d
revid/revid.go: removed unused logging consts
2019-01-16 17:52:49 +10:30
d3c8f31c08
revid/revid.go: actually fixed conflict
2019-01-16 17:49:22 +10:30
606c1a5885
revid/revid.go: fixed conflict
2019-01-16 17:47:57 +10:30
59024fea79
revid/revid.go: further split up miscy consts
2019-01-16 17:46:17 +10:30
ef6811d3b8
Merged in webcam (pull request #86 )
...
revid: addition of webcam input
Approved-by: kortschak <dan@kortschak.io>
2019-01-16 07:12:30 +00:00
582f12d157
revid/revid.go: in execution of ffmpeg, the device path is replaced by r.config.InputFileName
2019-01-16 17:29:56 +10:30
e184b091d3
revid/revid.go: rtmp connection properties comment changed to RTMP
2019-01-16 16:42:37 +10:30
59cc2d409a
Revert "revid: removed redundant error logging"
...
This reverts commit eacbfb9ee3
2019-01-14 16:37:18 +10:30
eacbfb9ee3
revid: removed redundant error logging
2019-01-14 16:31:43 +10:30
ae34ebe368
Merged in revid-start-stop-errors (pull request #114 )
...
Return errors from revid.Start and revid.Stop
Approved-by: kortschak <dan@kortschak.io>
2019-01-14 04:27:34 +00:00
137943af82
Merged in revid-config-safer (pull request #112 )
...
Made revid's Config() func safer
Approved-by: kortschak <dan@kortschak.io>
2019-01-13 23:57:27 +00:00
5ae1e41e38
revid: start and stop now return errors
2019-01-13 22:01:04 +10:30
ba54974de9
revid: removed Config() func from revid because it's not being used
2019-01-13 21:50:47 +10:30
a0d7681d5f
revid: not wrapping webcam args in string to pass to func
2019-01-13 20:52:09 +10:30
07307ed492
updating webcam branch
...
Merge branch 'master' into webcam
2019-01-13 19:29:32 +10:30
aa5d316816
revid: made revid.Config() return copy of revid's config rather than pointer so that mutation isn't possible
2019-01-13 19:15:02 +10:30
08069e22d1
revid: sectioned constants and added some commenting
2019-01-13 17:17:35 +10:30
9365c4a1de
revid: removed unused consts
2019-01-13 17:10:17 +10:30
bf8d85d0ba
revid: removed unused loglevels
2019-01-13 17:03:58 +10:30
7f07c4cb20
revid,stream/flv: add back initial header write
2019-01-11 13:53:05 +10:30
4e62606622
updating this branch with master
...
Merge branch 'master' into psi-pr-cleanup
2019-01-11 13:15:23 +10:30
ebd6d5816d
psi: full stop at end of comment, made lastTime belong to packer and moved some vars to a more appropriate location
2019-01-08 19:39:22 +10:30
8878063dc8
revid: clean up vars for use in calculation of time between writes to packer
2019-01-07 10:43:30 +10:30
05e0672e89
stream/flv: remove unnecessary header write on creation
2019-01-05 17:56:55 +10:30
Trek H