fix repos

Normally the terminal uses CSI escape sequences when the UP, DOWN,
LEFT, RIGHT and HOME, END keys are pressed. These look like the
following ESC [ A etc, where ESC [ is the CSI sequence.

xterm and other terminals however can generate an alternative
escape sequence called SS3 if in the application keypad mode.
This sequence is ESC O A etc.

Bash readline understands both modes so nowadays you rarely
see OA being printed when you press the up arrow while the terminal
is using the keypad mode. readline currently does not understand
these sequences.

To test this fix, I used an xterm and put it in keypad mode
using the command "tput smkx". Then I started the readline-demo
and tried using arrow keys. Without this fix, OA is printed when
I press up. With this fix, readline fetches the previous command
as per regular mode. After testing you can escape back to
regular mode using "tput rmkx".

.gitignore

@@ -0,0 +1 @@
+.vscode/*

.travis.yml

@@ -1,9 +1,8 @@
 language: go
 go:
-  - 1.5
-  - 1.7
+  - 1.x
 script:
-  - GOOS=windows go install github.com/chzyer/readline/example/...
-  - GOOS=linux go install github.com/chzyer/readline/example/...
-  - GOOS=darwin go install github.com/chzyer/readline/example/...
+  - GOOS=windows go install git.internal/re/readline/example/...
+  - GOOS=linux go install git.internal/re/readline/example/...
+  - GOOS=darwin go install git.internal/re/readline/example/...
   - go test -race -v

CHANGELOG.md

@@ -11,7 +11,7 @@
 
 * [#38][38] add SetChildren for prefix completer interface
 * [#42][42] improve multiple lines compatibility
-* [#43][43] remove sub-package(runes) for gopkg compatiblity
+* [#43][43] remove sub-package(runes) for gopkg compatibility
 * [#46][46] Auto complete with space prefixed line
 * [#48][48]	support suspend process (ctrl+Z)
 * [#49][49] fix bug that check equals with previous command
@@ -19,12 +19,12 @@
 
 ### 1.2 - 2016-03-05
 
-* Add a demo for checking password strength [example/readline-pass-strength](https://github.com/chzyer/readline/blob/master/example/readline-pass-strength/readline-pass-strength.go), , written by [@sahib](https://github.com/sahib)
+* Add a demo for checking password strength [example/readline-pass-strength](https://git.internal/re/readline/blob/master/example/readline-pass-strength/readline-pass-strength.go), , written by [@sahib](https://github.com/sahib)
 * [#23][23], support stdin remapping
 * [#27][27], add a `UniqueEditLine` to `Config`, which will erase the editing line after user submited it, usually use in IM.
-* Add a demo for multiline [example/readline-multiline](https://github.com/chzyer/readline/blob/master/example/readline-multiline/readline-multiline.go) which can submit one SQL by multiple lines.
+* Add a demo for multiline [example/readline-multiline](https://git.internal/re/readline/blob/master/example/readline-multiline/readline-multiline.go) which can submit one SQL by multiple lines.
 * Supports performs even stdin/stdout is not a tty.
-* Add a new simple apis for single instance, check by [here](https://github.com/chzyer/readline/blob/master/std.go). It need to save history manually if using this api.
+* Add a new simple apis for single instance, check by [here](https://git.internal/re/readline/blob/master/std.go). It need to save history manually if using this api.
 * [#28][28], fixes the history is not working as expected.
 * [#33][33], vim mode now support `c`, `d`, `x (delete character)`, `r (replace character)`
 
@@ -42,17 +42,17 @@
 
 * Initial public release.
 
-[12]: https://github.com/chzyer/readline/pull/12
-[17]: https://github.com/chzyer/readline/pull/17
-[23]: https://github.com/chzyer/readline/pull/23
-[27]: https://github.com/chzyer/readline/pull/27
-[28]: https://github.com/chzyer/readline/pull/28
-[33]: https://github.com/chzyer/readline/pull/33
-[38]: https://github.com/chzyer/readline/pull/38
-[42]: https://github.com/chzyer/readline/pull/42
-[43]: https://github.com/chzyer/readline/pull/43
-[46]: https://github.com/chzyer/readline/pull/46
-[48]: https://github.com/chzyer/readline/pull/48
-[49]: https://github.com/chzyer/readline/pull/49
-[53]: https://github.com/chzyer/readline/pull/53
-[60]: https://github.com/chzyer/readline/pull/60
+[12]: https://git.internal/re/readline/pull/12
+[17]: https://git.internal/re/readline/pull/17
+[23]: https://git.internal/re/readline/pull/23
+[27]: https://git.internal/re/readline/pull/27
+[28]: https://git.internal/re/readline/pull/28
+[33]: https://git.internal/re/readline/pull/33
+[38]: https://git.internal/re/readline/pull/38
+[42]: https://git.internal/re/readline/pull/42
+[43]: https://git.internal/re/readline/pull/43
+[46]: https://git.internal/re/readline/pull/46
+[48]: https://git.internal/re/readline/pull/48
+[49]: https://git.internal/re/readline/pull/49
+[53]: https://git.internal/re/readline/pull/53
+[60]: https://git.internal/re/readline/pull/60

README.md

@@ -1,7 +1,7 @@
 [![Build Status](https://travis-ci.org/chzyer/readline.svg?branch=master)](https://travis-ci.org/chzyer/readline)
 [![Software License](https://img.shields.io/badge/license-MIT-brightgreen.svg)](LICENSE.md)
-[![Version](https://img.shields.io/github/tag/chzyer/readline.svg)](https://github.com/chzyer/readline/releases)
-[![GoDoc](https://godoc.org/github.com/chzyer/readline?status.svg)](https://godoc.org/github.com/chzyer/readline)
+[![Version](https://img.shields.io/github/tag/chzyer/readline.svg)](https://git.internal/re/readline/releases)
+[![GoDoc](https://godoc.org/git.internal/re/readline?status.svg)](https://godoc.org/git.internal/re/readline)
 [![OpenCollective](https://opencollective.com/readline/badge/backers.svg)](#backers)
 [![OpenCollective](https://opencollective.com/readline/badge/sponsors.svg)](#sponsors)
 
@@ -11,7 +11,7 @@
 <img src="https://raw.githubusercontent.com/chzyer/readline/assets/logo_f.png" />
 </p>
 
-A powerful readline library in `Linux` `macOS` `Windows`
+A powerful readline library in `Linux` `macOS` `Windows` `Solaris` `AIX`
 
 ## Guide
 
@@ -21,14 +21,15 @@ A powerful readline library in `Linux` `macOS` `Windows`
 ## Repos using readline
 
 [![cockroachdb](https://img.shields.io/github/stars/cockroachdb/cockroach.svg?label=cockroachdb/cockroach)](https://github.com/cockroachdb/cockroach)
+[![robertkrimen/otto](https://img.shields.io/github/stars/robertkrimen/otto.svg?label=robertkrimen/otto)](https://github.com/robertkrimen/otto)
 [![empire](https://img.shields.io/github/stars/remind101/empire.svg?label=remind101/empire)](https://github.com/remind101/empire)
+[![mehrdadrad/mylg](https://img.shields.io/github/stars/mehrdadrad/mylg.svg?label=mehrdadrad/mylg)](https://github.com/mehrdadrad/mylg)
+[![knq/usql](https://img.shields.io/github/stars/knq/usql.svg?label=knq/usql)](https://github.com/knq/usql)
 [![youtube/doorman](https://img.shields.io/github/stars/youtube/doorman.svg?label=youtube/doorman)](https://github.com/youtube/doorman)
 [![bom-d-van/harp](https://img.shields.io/github/stars/bom-d-van/harp.svg?label=bom-d-van/harp)](https://github.com/bom-d-van/harp)
 [![abiosoft/ishell](https://img.shields.io/github/stars/abiosoft/ishell.svg?label=abiosoft/ishell)](https://github.com/abiosoft/ishell)
-[![robertkrimen/otto](https://img.shields.io/github/stars/robertkrimen/otto.svg?label=robertkrimen/otto)](https://github.com/robertkrimen/otto)
 [![Netflix/hal-9001](https://img.shields.io/github/stars/Netflix/hal-9001.svg?label=Netflix/hal-9001)](https://github.com/Netflix/hal-9001)
 [![docker/go-p9p](https://img.shields.io/github/stars/docker/go-p9p.svg?label=docker/go-p9p)](https://github.com/docker/go-p9p)
-[![mehrdadrad/mylg](https://img.shields.io/github/stars/mehrdadrad/mylg.svg?label=mehrdadrad/mylg)](https://github.com/mehrdadrad/mylg)
 
 
 ## Feedback

ansi_windows.go

@@ -25,6 +25,7 @@ const (
 	COLOR_BINTENSITY = 0x0080
 
 	COMMON_LVB_UNDERSCORE = 0x8000
+	COMMON_LVB_BOLD       = 0x0007
 )
 
 var ColorTableFg = []word{
@@ -163,6 +164,8 @@ func (a *ANSIWriterCtx) ioloopEscSeq(w *bufio.Writer, r rune, argptr *[]string)
 				color |= ColorTableBg[c-40]
 			} else if c == 4 {
 				color |= COMMON_LVB_UNDERSCORE | ColorTableFg[7]
+			} else if c == 1 {
+				color |= COMMON_LVB_BOLD | COLOR_FINTENSITY
 			} else { // unknown code treat as reset
 				color = ColorTableFg[7]
 			}

complete.go

@@ -203,7 +203,9 @@ func (o *opCompleter) CompleteRefresh() {
 	// -1 to avoid reach the end of line
 	width := o.width - 1
 	colNum := width / colWidth
+	if colNum != 0 {
 		colWidth += (width - (colWidth * colNum)) / colNum
+	}
 
 	o.candidateColNum = colNum
 	buf := bufio.NewWriter(o.w)
@@ -219,7 +221,7 @@ func (o *opCompleter) CompleteRefresh() {
 		}
 		buf.WriteString(string(same))
 		buf.WriteString(string(c))
-		buf.Write(bytes.Repeat([]byte(" "), colWidth-len(c)))
+		buf.Write(bytes.Repeat([]byte(" "), colWidth-runes.WidthAll(c)-runes.WidthAll(same)))
 
 		if inSelect {
 			buf.WriteString("\033[0m")

example/readline-demo/readline-demo.go

@@ -9,7 +9,7 @@ import (
 	"strings"
 	"time"
 
-	"github.com/chzyer/readline"
+	"git.internal/re/readline"
 )
 
 func usage(w io.Writer) {
@@ -61,6 +61,15 @@ var completer = readline.NewPrefixCompleter(
 	readline.PcItem("sleep"),
 )
 
+func filterInput(r rune) (rune, bool) {
+	switch r {
+	// block CtrlZ feature
+	case readline.CharCtrlZ:
+		return r, false
+	}
+	return r, true
+}
+
 func main() {
 	l, err := readline.NewEx(&readline.Config{
 		Prompt:          "\033[31m»\033[0m ",
@@ -70,11 +79,13 @@ func main() {
 		EOFPrompt:       "exit",
 
 		HistorySearchFold:   true,
+		FuncFilterInputRune: filterInput,
 	})
 	if err != nil {
 		panic(err)
 	}
 	defer l.Close()
+	l.CaptureExitSignal()
 
 	setPasswordCfg := l.GenPasswordConfig()
 	setPasswordCfg.SetListener(func(line []rune, pos int, key rune) (newLine []rune, newPos int, ok bool) {
@@ -127,12 +138,11 @@ func main() {
 				println("you set:", strconv.Quote(string(pswd)))
 			}
 		case strings.HasPrefix(line, "setprompt"):
-			prompt := line[10:]
-			if prompt == "" {
+			if len(line) <= 10 {
 				log.Println("setprompt <prompt>")
 				break
 			}
-			l.SetPrompt(prompt)
+			l.SetPrompt(line[10:])
 		case strings.HasPrefix(line, "say"):
 			line := strings.TrimSpace(line[3:])
 			if len(line) == 0 {

example/readline-im/readline-im.go

@@ -2,12 +2,12 @@ package main
 
 import (
 	"fmt"
+	"log"
 	"math/rand"
 	"time"
 
-	"github.com/chzyer/readline"
+	"git.internal/re/readline"
 )
-import "log"
 
 func main() {
 	rl, err := readline.NewEx(&readline.Config{

example/readline-multiline/readline-multiline.go

@@ -3,7 +3,7 @@ package main
 import (
 	"strings"
 
-	"github.com/chzyer/readline"
+	"git.internal/re/readline"
 )
 
 func main() {

example/readline-pass-strength/readline-pass-strength.go

@@ -22,8 +22,7 @@ package main
 import (
 	"fmt"
 
-	"github.com/chzyer/readline"
-	zxcvbn "github.com/nbutton23/zxcvbn-go"
+	"git.internal/re/readline"
 )
 
 const (
@@ -50,30 +49,24 @@ func Colorize(msg string, color int) string {
 
 func createStrengthPrompt(password []rune) string {
 	symbol, color := "", Red
-	strength := zxcvbn.PasswordStrength(string(password), nil)
 
 	switch {
-	case strength.Score <= 1:
+	case len(password) <= 1:
 		symbol = "✗"
 		color = Red
-	case strength.Score <= 2:
+	case len(password) <= 3:
 		symbol = "⚡"
 		color = Magenta
-	case strength.Score <= 3:
+	case len(password) <= 5:
 		symbol = "⚠"
 		color = Yellow
-	case strength.Score <= 4:
+	default:
 		symbol = "✔"
 		color = Green
 	}
 
 	prompt := Colorize(symbol, color)
-	if strength.Entropy > 0 {
-		entropy := fmt.Sprintf(" %3.0f", strength.Entropy)
-		prompt += Colorize(entropy, Cyan)
-	} else {
 	prompt += Colorize(" ENT", Cyan)
-	}
 
 	prompt += Colorize(" New Password: ", color)
 	return prompt

example/readline-remote/readline-remote-client/client.go

@@ -1,6 +1,6 @@
 package main
 
-import "github.com/chzyer/readline"
+import "git.internal/re/readline"
 
 func main() {
 	if err := readline.DialRemote("tcp", ":12344"); err != nil {

example/readline-remote/readline-remote-server/server.go

@@ -3,7 +3,7 @@ package main
 import (
 	"fmt"
 
-	"github.com/chzyer/readline"
+	"git.internal/re/readline"
 )
 
 func main() {

go.mod

@@ -0,0 +1,8 @@
+module git.internal/re/readline
+
+go 1.15
+
+require (
+	github.com/chzyer/test v1.0.0
+	golang.org/x/sys v0.0.0-20220310020820-b874c991c1a5
+)

go.sum

@@ -0,0 +1,6 @@
+github.com/chzyer/logex v1.2.1 h1:XHDu3E6q+gdHgsdTPH6ImJMIp436vR6MPtH8gP05QzM=
+github.com/chzyer/logex v1.2.1/go.mod h1:JLbx6lG2kDbNRFnfkgvh4eRJRPX1QCoOIWomwysCBrQ=
+github.com/chzyer/test v1.0.0 h1:p3BQDXSxOhOG0P9z6/hGnII4LGiEPOYBhs8asl/fC04=
+github.com/chzyer/test v1.0.0/go.mod h1:2JlltgoNkt4TW/z9V/IzDdFaMTM2JPIi26O1pF38GC8=
+golang.org/x/sys v0.0.0-20220310020820-b874c991c1a5 h1:y/woIyUBFbpQGKS0u1aHF/40WUDnek3fPOyD08H5Vng=
+golang.org/x/sys v0.0.0-20220310020820-b874c991c1a5/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=

history.go

@@ -27,12 +27,14 @@ type opHistory struct {
 	current    *list.Element
 	fd         *os.File
 	fdLock     sync.Mutex
+	enable     bool
 }
 
 func newOpHistory(cfg *Config) (o *opHistory) {
 	o = &opHistory{
 		cfg:     cfg,
 		history: list.New(),
+		enable:  true,
 	}
 	return o
 }
@@ -117,7 +119,7 @@ func (o *opHistory) rewriteLocked() {
 
 	buf := bufio.NewWriter(fd)
 	for elem := o.history.Front(); elem != nil; elem = elem.Next() {
-		buf.WriteString(string(elem.Value.(*hisItem).Source))
+		buf.WriteString(string(elem.Value.(*hisItem).Source) + "\n")
 	}
 	buf.Flush()
 
@@ -223,6 +225,16 @@ func (o *opHistory) Next() ([]rune, bool) {
 	return runes.Copy(o.showItem(current.Value)), true
 }
 
+// Disable the current history
+func (o *opHistory) Disable() {
+	o.enable = false
+}
+
+// Enable the current history
+func (o *opHistory) Enable() {
+	o.enable = true
+}
+
 func (o *opHistory) debug() {
 	Debug("-------")
 	for item := o.history.Front(); item != nil; item = item.Next() {
@@ -232,6 +244,12 @@ func (o *opHistory) debug() {
 
 // save history
 func (o *opHistory) New(current []rune) (err error) {
+
+	// history deactivated
+	if !o.enable {
+		return nil
+	}
+
 	current = runes.Copy(current)
 
 	// if just use last command without modify

operation.go

@@ -3,6 +3,7 @@ package readline
 import (
 	"errors"
 	"io"
+	"sync"
 )
 
 var (
@@ -18,6 +19,7 @@ func (*InterruptError) Error() string {
 }
 
 type Operation struct {
+	m       sync.Mutex
 	cfg     *Config
 	t       *Terminal
 	buf     *RuneBuffer
@@ -32,6 +34,10 @@ type Operation struct {
 	*opVim
 }
 
+func (o *Operation) SetBuffer(what string) {
+	o.buf.Set([]rune(what))
+}
+
 type wrapWriter struct {
 	r      *Operation
 	t      *Terminal
@@ -66,7 +72,7 @@ func NewOperation(t *Terminal, cfg *Config) *Operation {
 		t:       t,
 		buf:     NewRuneBuffer(t, cfg.Prompt, cfg, width),
 		outchan: make(chan []rune),
-		errchan: make(chan error),
+		errchan: make(chan error, 1),
 	}
 	op.w = op.buf.w
 	op.SetConfig(cfg)
@@ -91,11 +97,29 @@ func (o *Operation) SetMaskRune(r rune) {
 	o.buf.SetMask(r)
 }
 
+func (o *Operation) GetConfig() *Config {
+	o.m.Lock()
+	cfg := *o.cfg
+	o.m.Unlock()
+	return &cfg
+}
+
 func (o *Operation) ioloop() {
 	for {
 		keepInSearchMode := false
 		keepInCompleteMode := false
 		r := o.t.ReadRune()
+
+		if o.GetConfig().FuncFilterInputRune != nil {
+			var process bool
+			r, process = o.GetConfig().FuncFilterInputRune(r)
+			if !process {
+				o.t.KickRead()
+				o.buf.Refresh(nil) // to refresh the line
+				continue           // ignore this rune
+			}
+		}
+
 		if r == 0 { // io.EOF
 			if o.buf.Len() == 0 {
 				o.buf.Clean()
@@ -149,7 +173,7 @@ func (o *Operation) ioloop() {
 				o.buf.Refresh(nil)
 			}
 		case CharTab:
-			if o.cfg.AutoComplete == nil {
+			if o.GetConfig().AutoComplete == nil {
 				o.t.Bell()
 				break
 			}
@@ -213,13 +237,15 @@ func (o *Operation) ioloop() {
 			o.Refresh()
 		case MetaBackspace, CharCtrlW:
 			o.buf.BackEscapeWord()
+		case CharCtrlY:
+			o.buf.Yank()
 		case CharEnter, CharCtrlJ:
 			if o.IsSearchMode() {
 				o.ExitSearchMode(false)
 			}
 			o.buf.MoveToLineEnd()
 			var data []rune
-			if !o.cfg.UniqueEditLine {
+			if !o.GetConfig().UniqueEditLine {
 				o.buf.WriteRune('\n')
 				data = o.buf.Reset()
 				data = data[:len(data)-1] // trim \n
@@ -228,7 +254,7 @@ func (o *Operation) ioloop() {
 				data = o.buf.Reset()
 			}
 			o.outchan <- data
-			if !o.cfg.DisableAutoSaveHistory {
+			if !o.GetConfig().DisableAutoSaveHistory {
 				// ignore IO error
 				_ = o.history.New(data)
 			} else {
@@ -262,14 +288,14 @@ func (o *Operation) ioloop() {
 			}
 
 			// treat as EOF
-			if !o.cfg.UniqueEditLine {
-				o.buf.WriteString(o.cfg.EOFPrompt + "\n")
+			if !o.GetConfig().UniqueEditLine {
+				o.buf.WriteString(o.GetConfig().EOFPrompt + "\n")
 			}
 			o.buf.Reset()
 			isUpdateHistory = false
 			o.history.Revert()
 			o.errchan <- io.EOF
-			if o.cfg.UniqueEditLine {
+			if o.GetConfig().UniqueEditLine {
 				o.buf.Clean()
 			}
 		case CharInterrupt:
@@ -286,12 +312,12 @@ func (o *Operation) ioloop() {
 			}
 			o.buf.MoveToLineEnd()
 			o.buf.Refresh(nil)
-			hint := o.cfg.InterruptPrompt + "\n"
-			if !o.cfg.UniqueEditLine {
+			hint := o.GetConfig().InterruptPrompt + "\n"
+			if !o.GetConfig().UniqueEditLine {
 				o.buf.WriteString(hint)
 			}
 			remain := o.buf.Reset()
-			if !o.cfg.UniqueEditLine {
+			if !o.GetConfig().UniqueEditLine {
 				remain = remain[:len(remain)-len([]rune(hint))]
 			}
 			isUpdateHistory = false
@@ -310,13 +336,15 @@ func (o *Operation) ioloop() {
 			}
 		}
 
-		if o.cfg.Listener != nil {
-			newLine, newPos, ok := o.cfg.Listener.OnChange(o.buf.Runes(), o.buf.Pos(), r)
+		listener := o.GetConfig().Listener
+		if listener != nil {
+			newLine, newPos, ok := listener.OnChange(o.buf.Runes(), o.buf.Pos(), r)
 			if ok {
 				o.buf.SetWithIdx(newPos, newLine)
 			}
 		}
 
+		o.m.Lock()
 		if !keepInSearchMode && o.IsSearchMode() {
 			o.ExitSearchMode(false)
 			o.buf.Refresh(nil)
@@ -333,15 +361,16 @@ func (o *Operation) ioloop() {
 			// it will cause null history
 			o.history.Update(o.buf.Runes(), false)
 		}
+		o.m.Unlock()
 	}
 }
 
 func (o *Operation) Stderr() io.Writer {
-	return &wrapWriter{target: o.cfg.Stderr, r: o, t: o.t}
+	return &wrapWriter{target: o.GetConfig().Stderr, r: o, t: o.t}
 }
 
 func (o *Operation) Stdout() io.Writer {
-	return &wrapWriter{target: o.cfg.Stdout, r: o, t: o.t}
+	return &wrapWriter{target: o.GetConfig().Stdout, r: o, t: o.t}
 }
 
 func (o *Operation) String() (string, error) {
@@ -353,8 +382,9 @@ func (o *Operation) Runes() ([]rune, error) {
 	o.t.EnterRawMode()
 	defer o.t.ExitRawMode()
 
-	if o.cfg.Listener != nil {
-		o.cfg.Listener.OnChange(nil, 0, 0)
+	listener := o.GetConfig().Listener
+	if listener != nil {
+		listener.OnChange(nil, 0, 0)
 	}
 
 	o.buf.Refresh(nil) // print prompt
@@ -406,6 +436,10 @@ func (o *Operation) Slice() ([]byte, error) {
 }
 
 func (o *Operation) Close() {
+	select {
+	case o.errchan <- io.EOF:
+	default:
+	}
 	o.history.Close()
 }
 
@@ -422,6 +456,8 @@ func (o *Operation) IsNormalMode() bool {
 }
 
 func (op *Operation) SetConfig(cfg *Config) (*Config, error) {
+	op.m.Lock()
+	defer op.m.Unlock()
 	if op.cfg == cfg {
 		return op.cfg, nil
 	}
@@ -489,3 +525,13 @@ func (d *DumpListener) OnChange(line []rune, pos int, key rune) (newLine []rune,
 type Listener interface {
 	OnChange(line []rune, pos int, key rune) (newLine []rune, newPos int, ok bool)
 }
+
+type Painter interface {
+	Paint(line []rune, pos int) []rune
+}
+
+type defaultPainter struct{}
+
+func (p *defaultPainter) Paint(line []rune, _ int) []rune {
+	return line
+}

password.go

@@ -25,6 +25,7 @@ func (o *opPassword) PasswordConfig() *Config {
 		InterruptPrompt: "\n",
 		EOFPrompt:       "\n",
 		HistoryLimit:    -1,
+		Painter:         &defaultPainter{},
 
 		Stdout: o.o.cfg.Stdout,
 		Stderr: o.o.cfg.Stderr,

readline.go

@@ -17,7 +17,9 @@
 //
 package readline
 
-import "io"
+import (
+	"io"
+)
 
 type Instance struct {
 	Config    *Config
@@ -44,6 +46,8 @@ type Config struct {
 	// NOTE: Listener will be triggered by (nil, 0, 0) immediately
 	Listener Listener
 
+	Painter Painter
+
 	// If VimMode is true, readline will in vim.insert mode by default
 	VimMode bool
 
@@ -52,7 +56,8 @@ type Config struct {
 
 	FuncGetWidth func() int
 
-	Stdin  io.Reader
+	Stdin       io.ReadCloser
+	StdinWriter io.Writer
 	Stdout      io.Writer
 	Stderr      io.Writer
 
@@ -63,6 +68,10 @@ type Config struct {
 	// it use in IM usually.
 	UniqueEditLine bool
 
+	// filter input runes (may be used to disable CtrlZ or for translating some keys to different actions)
+	// -> output = new (translated) rune and true/false if continue with processing this one
+	FuncFilterInputRune func(rune) (rune, bool)
+
 	// force use interactive even stdout is not a tty
 	FuncIsTerminal      func() bool
 	FuncMakeRaw         func() error
@@ -91,6 +100,9 @@ func (c *Config) Init() error {
 	if c.Stdin == nil {
 		c.Stdin = NewCancelableStdin(Stdin)
 	}
+
+	c.Stdin, c.StdinWriter = NewFillableStdin(c.Stdin)
+
 	if c.Stdout == nil {
 		c.Stdout = Stdout
 	}
@@ -145,12 +157,19 @@ func (c *Config) SetListener(f func(line []rune, pos int, key rune) (newLine []r
 	c.Listener = FuncListener(f)
 }
 
+func (c *Config) SetPainter(p Painter) {
+	c.Painter = p
+}
+
 func NewEx(cfg *Config) (*Instance, error) {
 	t, err := NewTerminal(cfg)
 	if err != nil {
 		return nil, err
 	}
 	rl := t.Readline()
+	if cfg.Painter == nil {
+		cfg.Painter = &defaultPainter{}
+	}
 	return &Instance{
 		Config:    cfg,
 		Terminal:  t,
@@ -238,6 +257,11 @@ func (i *Instance) Readline() (string, error) {
 	return i.Operation.String()
 }
 
+func (i *Instance) ReadlineWithDefault(what string) (string, error) {
+	i.Operation.SetBuffer(what)
+	return i.Operation.String()
+}
+
 func (i *Instance) SaveHistory(content string) error {
 	return i.Operation.SaveHistory(content)
 }
@@ -248,13 +272,24 @@ func (i *Instance) ReadSlice() ([]byte, error) {
 }
 
 // we must make sure that call Close() before process exit.
+// if there has a pending reading operation, that reading will be interrupted.
+// so you can capture the signal and call Instance.Close(), it's thread-safe.
 func (i *Instance) Close() error {
+	i.Config.Stdin.Close()
+	i.Operation.Close()
 	if err := i.Terminal.Close(); err != nil {
 		return err
 	}
-	i.Operation.Close()
 	return nil
 }
+
+// call CaptureExitSignal when you want readline exit gracefully.
+func (i *Instance) CaptureExitSignal() {
+	CaptureExitSignal(func() {
+		i.Close()
+	})
+}
+
 func (i *Instance) Clean() {
 	i.Operation.Clean()
 }
@@ -263,6 +298,20 @@ func (i *Instance) Write(b []byte) (int, error) {
 	return i.Stdout().Write(b)
 }
 
+// WriteStdin prefill the next Stdin fetch
+// Next time you call ReadLine() this value will be writen before the user input
+// ie :
+//  i := readline.New()
+//  i.WriteStdin([]byte("test"))
+//  _, _= i.Readline()
+//
+// gives
+//
+// > test[cursor]
+func (i *Instance) WriteStdin(val []byte) (int, error) {
+	return i.Terminal.WriteStdin(val)
+}
+
 func (i *Instance) SetConfig(cfg *Config) *Config {
 	if i.Config == cfg {
 		return cfg
@@ -277,3 +326,13 @@ func (i *Instance) SetConfig(cfg *Config) *Config {
 func (i *Instance) Refresh() {
 	i.Operation.Refresh()
 }
+
+// HistoryDisable the save of the commands into the history
+func (i *Instance) HistoryDisable() {
+	i.Operation.history.Disable()
+}
+
+// HistoryEnable the save of the commands into the history (default on)
+func (i *Instance) HistoryEnable() {
+	i.Operation.history.Enable()
+}

remote.go

@@ -189,11 +189,12 @@ loop:
 	}
 }
 
-func (r *RemoteSvr) Close() {
+func (r *RemoteSvr) Close() error {
 	if atomic.CompareAndSwapInt32(&r.closed, 0, 1) {
 		close(r.stopChan)
 		r.conn.Close()
 	}
+	return nil
 }
 
 func (r *RemoteSvr) readLoop(buf *bufio.Reader) {

runebuf.go

@@ -4,6 +4,7 @@ import (
 	"bufio"
 	"bytes"
 	"io"
+	"strconv"
 	"strings"
 	"sync"
 )
@@ -29,9 +30,15 @@ type RuneBuffer struct {
 
 	offset string
 
+	lastKill []rune
+
 	sync.Mutex
 }
 
+func (r *RuneBuffer) pushKill(text []rune) {
+	r.lastKill = append([]rune{}, text...)
+}
+
 func (r *RuneBuffer) OnWidthChange(newWidth int) {
 	r.Lock()
 	r.width = newWidth
@@ -187,6 +194,7 @@ func (r *RuneBuffer) Replace(ch rune) {
 func (r *RuneBuffer) Erase() {
 	r.Refresh(func() {
 		r.idx = 0
+		r.pushKill(r.buf[:])
 		r.buf = r.buf[:0]
 	})
 }
@@ -196,6 +204,7 @@ func (r *RuneBuffer) Delete() (success bool) {
 		if r.idx == len(r.buf) {
 			return
 		}
+		r.pushKill(r.buf[r.idx : r.idx+1])
 		r.buf = append(r.buf[:r.idx], r.buf[r.idx+1:]...)
 		success = true
 	})
@@ -212,6 +221,7 @@ func (r *RuneBuffer) DeleteWord() {
 	}
 	for i := init + 1; i < len(r.buf); i++ {
 		if !IsWordBreak(r.buf[i]) && IsWordBreak(r.buf[i-1]) {
+			r.pushKill(r.buf[r.idx : i-1])
 			r.Refresh(func() {
 				r.buf = append(r.buf[:r.idx], r.buf[i-1:]...)
 			})
@@ -247,6 +257,7 @@ func (r *RuneBuffer) KillFront() {
 		}
 
 		length := len(r.buf) - r.idx
+		r.pushKill(r.buf[:r.idx])
 		copy(r.buf[:length], r.buf[r.idx:])
 		r.idx = 0
 		r.buf = r.buf[:length]
@@ -255,6 +266,7 @@ func (r *RuneBuffer) KillFront() {
 
 func (r *RuneBuffer) Kill() {
 	r.Refresh(func() {
+		r.pushKill(r.buf[r.idx:])
 		r.buf = r.buf[:r.idx]
 	})
 }
@@ -321,6 +333,7 @@ func (r *RuneBuffer) BackEscapeWord() {
 		}
 		for i := r.idx - 1; i > 0; i-- {
 			if !IsWordBreak(r.buf[i]) && IsWordBreak(r.buf[i-1]) {
+				r.pushKill(r.buf[i:r.idx])
 				r.buf = append(r.buf[:i], r.buf[r.idx:]...)
 				r.idx = i
 				return
@@ -332,6 +345,20 @@ func (r *RuneBuffer) BackEscapeWord() {
 	})
 }
 
+func (r *RuneBuffer) Yank() {
+	if len(r.lastKill) == 0 {
+		return
+	}
+	r.Refresh(func() {
+		buf := make([]rune, 0, len(r.buf)+len(r.lastKill))
+		buf = append(buf, r.buf[:r.idx]...)
+		buf = append(buf, r.lastKill...)
+		buf = append(buf, r.buf[r.idx:]...)
+		r.buf = buf
+		r.idx += len(r.lastKill)
+	})
+}
+
 func (r *RuneBuffer) Backspace() {
 	r.Refresh(func() {
 		if r.idx == 0 {
@@ -460,28 +487,58 @@ func (r *RuneBuffer) output() []byte {
 			buf.Write([]byte(string(r.cfg.MaskRune)))
 		}
 		if len(r.buf) > r.idx {
-			buf.Write(runes.Backspace(r.buf[r.idx:]))
+			buf.Write(r.getBackspaceSequence())
 		}
 
 	} else {
-		for idx := range r.buf {
-			if r.buf[idx] == '\t' {
+		for _, e := range r.cfg.Painter.Paint(r.buf, r.idx) {
+			if e == '\t' {
 				buf.WriteString(strings.Repeat(" ", TabWidth))
 			} else {
-				buf.WriteRune(r.buf[idx])
+				buf.WriteRune(e)
 			}
 		}
 		if r.isInLineEdge() {
 			buf.Write([]byte(" \b"))
 		}
 	}
-
+	// cursor position
 	if len(r.buf) > r.idx {
-		buf.Write(runes.Backspace(r.buf[r.idx:]))
+		buf.Write(r.getBackspaceSequence())
 	}
 	return buf.Bytes()
 }
 
+func (r *RuneBuffer) getBackspaceSequence() []byte {
+	var sep = map[int]bool{}
+
+	var i int
+	for {
+		if i >= runes.WidthAll(r.buf) {
+			break
+		}
+
+		if i == 0 {
+			i -= r.promptLen()
+		}
+		i += r.width
+
+		sep[i] = true
+	}
+	var buf []byte
+	for i := len(r.buf); i > r.idx; i-- {
+		// move input to the left of one
+		buf = append(buf, '\b')
+		if sep[i] {
+			// up one line, go to the start of the line and move cursor right to the end (r.width)
+			buf = append(buf, "\033[A\r"+"\033["+strconv.Itoa(r.width)+"C"...)
+		}
+	}
+
+	return buf
+
+}
+
 func (r *RuneBuffer) Reset() []rune {
 	ret := runes.Copy(r.buf)
 	r.buf = r.buf[:0]

runes/runes.go

@@ -1,6 +1,6 @@
 // deprecated.
-// see https://github.com/chzyer/readline/issues/43
-// use github.com/chzyer/readline/runes.go
+// see https://git.internal/re/readline/issues/43
+// use git.internal/re/readline/runes.go
 package runes
 
 import (

std.go

@@ -4,6 +4,7 @@ import (
 	"io"
 	"os"
 	"sync"
+	"sync/atomic"
 )
 
 var (
@@ -69,6 +70,7 @@ type CancelableStdin struct {
 	r      io.Reader
 	mutex  sync.Mutex
 	stop   chan struct{}
+	closed int32
 	notify chan struct{}
 	data   []byte
 	read   int
@@ -91,7 +93,11 @@ loop:
 		select {
 		case <-c.notify:
 			c.read, c.err = c.r.Read(c.data)
-			c.notify <- struct{}{}
+			select {
+			case c.notify <- struct{}{}:
+			case <-c.stop:
+				break loop
+			}
 		case <-c.stop:
 			break loop
 		}
@@ -101,9 +107,16 @@ loop:
 func (c *CancelableStdin) Read(b []byte) (n int, err error) {
 	c.mutex.Lock()
 	defer c.mutex.Unlock()
+	if atomic.LoadInt32(&c.closed) == 1 {
+		return 0, io.EOF
+	}
 
 	c.data = b
-	c.notify <- struct{}{}
+	select {
+	case c.notify <- struct{}{}:
+	case <-c.stop:
+		return 0, io.EOF
+	}
 	select {
 	case <-c.notify:
 		return c.read, c.err
@@ -113,6 +126,72 @@ func (c *CancelableStdin) Read(b []byte) (n int, err error) {
 }
 
 func (c *CancelableStdin) Close() error {
+	if atomic.CompareAndSwapInt32(&c.closed, 0, 1) {
 		close(c.stop)
+	}
+	return nil
+}
+
+// FillableStdin is a stdin reader which can prepend some data before
+// reading into the real stdin
+type FillableStdin struct {
+	sync.Mutex
+	stdin       io.Reader
+	stdinBuffer io.ReadCloser
+	buf         []byte
+	bufErr      error
+}
+
+// NewFillableStdin gives you FillableStdin
+func NewFillableStdin(stdin io.Reader) (io.ReadCloser, io.Writer) {
+	r, w := io.Pipe()
+	s := &FillableStdin{
+		stdinBuffer: r,
+		stdin:       stdin,
+	}
+	s.ioloop()
+	return s, w
+}
+
+func (s *FillableStdin) ioloop() {
+	go func() {
+		for {
+			bufR := make([]byte, 100)
+			var n int
+			n, s.bufErr = s.stdinBuffer.Read(bufR)
+			if s.bufErr != nil {
+				if s.bufErr == io.ErrClosedPipe {
+					break
+				}
+			}
+			s.Lock()
+			s.buf = append(s.buf, bufR[:n]...)
+			s.Unlock()
+		}
+	}()
+}
+
+// Read will read from the local buffer and if no data, read from stdin
+func (s *FillableStdin) Read(p []byte) (n int, err error) {
+	s.Lock()
+	i := len(s.buf)
+	if len(p) < i {
+		i = len(p)
+	}
+	if i > 0 {
+		n := copy(p, s.buf)
+		s.buf = s.buf[:0]
+		cerr := s.bufErr
+		s.bufErr = nil
+		s.Unlock()
+		return n, cerr
+	}
+	s.Unlock()
+	n, err = s.stdin.Read(p)
+	return n, err
+}
+
+func (s *FillableStdin) Close() error {
+	s.stdinBuffer.Close()
 	return nil
 }

term.go

@@ -2,7 +2,7 @@
 // Use of this source code is governed by a BSD-style
 // license that can be found in the LICENSE file.
 
-// +build darwin dragonfly freebsd linux,!appengine netbsd openbsd
+// +build aix darwin dragonfly freebsd linux,!appengine netbsd openbsd os400 solaris
 
 // Package terminal provides support functions for dealing with terminals, as
 // commonly found on UNIX systems.
@@ -19,19 +19,17 @@ package readline
 import (
 	"io"
 	"syscall"
-	"unsafe"
 )
 
 // State contains the state of a terminal.
 type State struct {
-	termios syscall.Termios
+	termios Termios
 }
 
 // IsTerminal returns true if the given file descriptor is a terminal.
 func IsTerminal(fd int) bool {
-	var termios syscall.Termios
-	_, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlReadTermios, uintptr(unsafe.Pointer(&termios)), 0, 0, 0)
-	return err == 0
+	_, err := getTermios(fd)
+	return err == nil
 }
 
 // MakeRaw put the terminal connected to the given file descriptor into raw
@@ -39,8 +37,11 @@ func IsTerminal(fd int) bool {
 // restored.
 func MakeRaw(fd int) (*State, error) {
 	var oldState State
-	if _, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlReadTermios, uintptr(unsafe.Pointer(&oldState.termios)), 0, 0, 0); err != 0 {
+
+	if termios, err := getTermios(fd); err != nil {
 		return nil, err
+	} else {
+		oldState.termios = *termios
 	}
 
 	newState := oldState.termios
@@ -52,47 +53,35 @@ func MakeRaw(fd int) (*State, error) {
 	newState.Cflag &^= syscall.CSIZE | syscall.PARENB
 	newState.Cflag |= syscall.CS8
 
-	if _, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlWriteTermios, uintptr(unsafe.Pointer(&newState)), 0, 0, 0); err != 0 {
-		return nil, err
-	}
+	newState.Cc[syscall.VMIN] = 1
+	newState.Cc[syscall.VTIME] = 0
 
-	return &oldState, nil
+	return &oldState, setTermios(fd, &newState)
 }
 
 // GetState returns the current state of a terminal which may be useful to
 // restore the terminal after a signal.
 func GetState(fd int) (*State, error) {
-	var oldState State
-	if _, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlReadTermios, uintptr(unsafe.Pointer(&oldState.termios)), 0, 0, 0); err != 0 {
+	termios, err := getTermios(fd)
+	if err != nil {
 		return nil, err
 	}
 
-	return &oldState, nil
+	return &State{termios: *termios}, nil
 }
 
 // Restore restores the terminal connected to the given file descriptor to a
 // previous state.
 func restoreTerm(fd int, state *State) error {
-	_, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlWriteTermios, uintptr(unsafe.Pointer(&state.termios)), 0, 0, 0)
-	return err
-}
-
-// GetSize returns the dimensions of the given terminal.
-func GetSize(fd int) (width, height int, err error) {
-	var dimensions [4]uint16
-
-	if _, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), uintptr(syscall.TIOCGWINSZ), uintptr(unsafe.Pointer(&dimensions)), 0, 0, 0); err != 0 {
-		return -1, -1, err
-	}
-	return int(dimensions[1]), int(dimensions[0]), nil
+	return setTermios(fd, &state.termios)
 }
 
 // ReadPassword reads a line of input from a terminal without local echo.  This
 // is commonly used for inputting passwords and other sensitive data. The slice
 // returned does not include the \n.
 func ReadPassword(fd int) ([]byte, error) {
-	var oldState syscall.Termios
-	if _, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlReadTermios, uintptr(unsafe.Pointer(&oldState)), 0, 0, 0); err != 0 {
+	oldState, err := getTermios(fd)
+	if err != nil {
 		return nil, err
 	}
 
@@ -100,12 +89,12 @@ func ReadPassword(fd int) ([]byte, error) {
 	newState.Lflag &^= syscall.ECHO
 	newState.Lflag |= syscall.ICANON | syscall.ISIG
 	newState.Iflag |= syscall.ICRNL
-	if _, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlWriteTermios, uintptr(unsafe.Pointer(&newState)), 0, 0, 0); err != 0 {
+	if err := setTermios(fd, newState); err != nil {
 		return nil, err
 	}
 
 	defer func() {
-		syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlWriteTermios, uintptr(unsafe.Pointer(&oldState)), 0, 0, 0)
+		setTermios(fd, oldState)
 	}()
 
 	var buf [16]byte

term_bsd.go

@@ -6,7 +6,24 @@
 
 package readline
 
-import "syscall"
+import (
+	"syscall"
+	"unsafe"
+)
 
-const ioctlReadTermios = syscall.TIOCGETA
-const ioctlWriteTermios = syscall.TIOCSETA
+func getTermios(fd int) (*Termios, error) {
+	termios := new(Termios)
+	_, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), syscall.TIOCGETA, uintptr(unsafe.Pointer(termios)), 0, 0, 0)
+	if err != 0 {
+		return nil, err
+	}
+	return termios, nil
+}
+
+func setTermios(fd int, termios *Termios) error {
+	_, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), syscall.TIOCSETA, uintptr(unsafe.Pointer(termios)), 0, 0, 0)
+	if err != 0 {
+		return err
+	}
+	return nil
+}

term_linux.go

@@ -4,8 +4,30 @@
 
 package readline
 
+import (
+	"syscall"
+	"unsafe"
+)
+
 // These constants are declared here, rather than importing
 // them from the syscall package as some syscall packages, even
 // on linux, for example gccgo, do not declare them.
 const ioctlReadTermios = 0x5401  // syscall.TCGETS
 const ioctlWriteTermios = 0x5402 // syscall.TCSETS
+
+func getTermios(fd int) (*Termios, error) {
+	termios := new(Termios)
+	_, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlReadTermios, uintptr(unsafe.Pointer(termios)), 0, 0, 0)
+	if err != 0 {
+		return nil, err
+	}
+	return termios, nil
+}
+
+func setTermios(fd int, termios *Termios) error {
+	_, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), ioctlWriteTermios, uintptr(unsafe.Pointer(termios)), 0, 0, 0)
+	if err != 0 {
+		return err
+	}
+	return nil
+}

term_nosyscall6.go

@@ -0,0 +1,32 @@
+// Copyright 2013 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build aix os400 solaris
+
+package readline
+
+import "golang.org/x/sys/unix"
+
+// GetSize returns the dimensions of the given terminal.
+func GetSize(fd int) (int, int, error) {
+	ws, err := unix.IoctlGetWinsize(fd, unix.TIOCGWINSZ)
+	if err != nil {
+		return 0, 0, err
+	}
+	return int(ws.Col), int(ws.Row), nil
+}
+
+type Termios unix.Termios
+
+func getTermios(fd int) (*Termios, error) {
+	termios, err := unix.IoctlGetTermios(fd, unix.TCGETS)
+	if err != nil {
+		return nil, err
+	}
+	return (*Termios)(termios), nil
+}
+
+func setTermios(fd int, termios *Termios) error {
+	return unix.IoctlSetTermios(fd, unix.TCSETSF, (*unix.Termios)(termios))
+}

term_unix.go

@@ -0,0 +1,24 @@
+// Copyright 2011 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// +build darwin dragonfly freebsd linux,!appengine netbsd openbsd
+
+package readline
+
+import (
+	"syscall"
+	"unsafe"
+)
+
+type Termios syscall.Termios
+
+// GetSize returns the dimensions of the given terminal.
+func GetSize(fd int) (int, int, error) {
+	var dimensions [4]uint16
+	_, _, err := syscall.Syscall6(syscall.SYS_IOCTL, uintptr(fd), uintptr(syscall.TIOCGWINSZ), uintptr(unsafe.Pointer(&dimensions)), 0, 0, 0)
+	if err != 0 {
+		return 0, 0, err
+	}
+	return int(dimensions[1]), int(dimensions[0]), nil
+}

terminal.go

@@ -10,6 +10,7 @@ import (
 )
 
 type Terminal struct {
+	m         sync.Mutex
 	cfg       *Config
 	outchan   chan rune
 	closed    int32
@@ -64,6 +65,12 @@ func (t *Terminal) Write(b []byte) (int, error) {
 	return t.cfg.Stdout.Write(b)
 }
 
+// WriteStdin prefill the next Stdin fetch
+// Next time you call ReadLine() this value will be writen before the user input
+func (t *Terminal) WriteStdin(b []byte) (int, error) {
+	return t.cfg.StdinWriter.Write(b)
+}
+
 type termSize struct {
 	left int
 	top  int
@@ -118,10 +125,11 @@ func (t *Terminal) ioloop() {
 	var (
 		isEscape       bool
 		isEscapeEx     bool
+		isEscapeSS3    bool
 		expectNextChar bool
 	)
 
-	buf := bufio.NewReader(t.cfg.Stdin)
+	buf := bufio.NewReader(t.getStdin())
 	for {
 		if !expectNextChar {
 			atomic.StoreInt32(&t.isReading, 0)
@@ -145,9 +153,15 @@ func (t *Terminal) ioloop() {
 		if isEscape {
 			isEscape = false
 			if r == CharEscapeEx {
+				// ^][
 				expectNextChar = true
 				isEscapeEx = true
 				continue
+			} else if r == CharO {
+				// ^]O
+				expectNextChar = true
+				isEscapeSS3 = true
+				continue
 			}
 			r = escapeKey(r, buf)
 		} else if isEscapeEx {
@@ -170,6 +184,15 @@ func (t *Terminal) ioloop() {
 				expectNextChar = true
 				continue
 			}
+		} else if isEscapeSS3 {
+			isEscapeSS3 = false
+			if key := readEscKey(r, buf); key != nil {
+				r = escapeSS3Key(key)
+			}
+			if r == 0 {
+				expectNextChar = true
+				continue
+			}
 		}
 
 		expectNextChar = true
@@ -206,10 +229,26 @@ func (t *Terminal) Close() error {
 	return t.ExitRawMode()
 }
 
+func (t *Terminal) GetConfig() *Config {
+	t.m.Lock()
+	cfg := *t.cfg
+	t.m.Unlock()
+	return &cfg
+}
+
+func (t *Terminal) getStdin() io.Reader {
+	t.m.Lock()
+	r := t.cfg.Stdin
+	t.m.Unlock()
+	return r
+}
+
 func (t *Terminal) SetConfig(c *Config) error {
 	if err := c.Init(); err != nil {
 		return err
 	}
+	t.m.Lock()
 	t.cfg = c
+	t.m.Unlock()
 	return nil
 }

utils.go

@@ -6,9 +6,11 @@ import (
 	"container/list"
 	"fmt"
 	"os"
+	"os/signal"
 	"strconv"
 	"strings"
 	"sync"
+	"syscall"
 	"time"
 	"unicode"
 )
@@ -38,8 +40,10 @@ const (
 	CharTranspose = 20
 	CharCtrlU     = 21
 	CharCtrlW     = 23
+	CharCtrlY     = 25
 	CharCtrlZ     = 26
 	CharEsc       = 27
+	CharO         = 79
 	CharEscapeEx  = 91
 	CharBackspace = 127
 )
@@ -82,7 +86,9 @@ func Restore(fd int, state *State) error {
 	if err != nil {
 		// errno 0 means everything is ok :)
 		if err.Error() == "errno 0" {
-			err = nil
+			return nil
+		} else {
+			return err
 		}
 	}
 	return nil
@@ -118,6 +124,27 @@ func escapeExKey(key *escapeKeyPair) rune {
 	return r
 }
 
+// translate EscOX SS3 codes for up/down/etc.
+func escapeSS3Key(key *escapeKeyPair) rune {
+	var r rune
+	switch key.typ {
+	case 'D':
+		r = CharBackward
+	case 'C':
+		r = CharForward
+	case 'A':
+		r = CharPrev
+	case 'B':
+		r = CharNext
+	case 'H':
+		r = CharLineStart
+	case 'F':
+		r = CharLineEnd
+	default:
+	}
+	return r
+}
+
 type escapeKeyPair struct {
 	attr string
 	typ  rune
@@ -272,3 +299,13 @@ func Debug(o ...interface{}) {
 	fmt.Fprintln(f, o...)
 	f.Close()
 }
+
+func CaptureExitSignal(f func()) {
+	cSignal := make(chan os.Signal, 1)
+	signal.Notify(cSignal, os.Interrupt, syscall.SIGTERM)
+	go func() {
+		for range cSignal {
+			f()
+		}
+	}()
+}

utils_unix.go

@@ -1,4 +1,4 @@
-// +build darwin dragonfly freebsd linux,!appengine netbsd openbsd
+// +build aix darwin dragonfly freebsd linux,!appengine netbsd openbsd os400 solaris
 
 package readline
 
@@ -8,7 +8,6 @@ import (
 	"os/signal"
 	"sync"
 	"syscall"
-	"unsafe"
 )
 
 type winsize struct {
@@ -30,17 +29,11 @@ func SuspendMe() {
 
 // get width of the terminal
 func getWidth(stdoutFd int) int {
-	ws := &winsize{}
-	retCode, _, errno := syscall.Syscall(syscall.SYS_IOCTL,
-		uintptr(stdoutFd),
-		uintptr(syscall.TIOCGWINSZ),
-		uintptr(unsafe.Pointer(ws)))
-
-	if int(retCode) == -1 {
-		_ = errno
+	cols, _, err := GetSize(stdoutFd)
+	if err != nil {
 		return -1
 	}
-	return int(ws.Col)
+	return cols
 }
 
 func GetScreenWidth() int {

vim.go

@@ -72,6 +72,8 @@ func (o *opVim) handleVimNormalMovement(r rune, readNext func() rune) (t rune, h
 		case 'l':
 			rb.Delete()
 		}
+	case 'p':
+		rb.Yank()
 	case 'b', 'B':
 		rb.MoveToPrevWord()
 	case 'w', 'W':