client_golang/prometheus/counter.go

320 lines
11 KiB
Go
Raw Normal View History

// Copyright 2014 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package prometheus
import (
"errors"
"math"
"sync/atomic"
"time"
dto "github.com/prometheus/client_model/go"
)
// Counter is a Metric that represents a single numerical value that only ever
// goes up. That implies that it cannot be used to count items whose number can
// also go down, e.g. the number of currently running goroutines. Those
// "counters" are represented by Gauges.
//
// A Counter is typically used to count requests served, tasks completed, errors
// occurred, etc.
//
// To create Counter instances, use NewCounter.
type Counter interface {
Metric
Collector
// Inc increments the counter by 1. Use Add to increment it by arbitrary
// non-negative values.
Inc()
// Add adds the given value to the counter. It panics if the value is <
// 0.
Add(float64)
}
// ExemplarAdder is implemented by Counters that offer the option of adding a
// value to the Counter together with an exemplar. Its AddWithExemplar method
// works like the Add method of the Counter interface but also replaces the
// currently saved exemplar (if any) with a new one, created from the provided
// value, the current time as timestamp, and the provided labels. Empty Labels
// will lead to a valid (label-less) exemplar. But if Labels is nil, the current
// exemplar is left in place. AddWithExemplar panics if the value is < 0, if any
// of the provided labels are invalid, or if the provided labels contain more
// than 64 runes in total.
type ExemplarAdder interface {
AddWithExemplar(value float64, exemplar Labels)
}
// CounterOpts is an alias for Opts. See there for doc comments.
type CounterOpts Opts
// NewCounter creates a new Counter based on the provided CounterOpts.
//
// The returned implementation also implements ExemplarAdder. It is safe to
// perform the corresponding type assertion.
//
// The returned implementation tracks the counter value in two separate
// variables, a float64 and a uint64. The latter is used to track calls of the
// Inc method and calls of the Add method with a value that can be represented
// as a uint64. This allows atomic increments of the counter with optimal
// performance. (It is common to have an Inc call in very hot execution paths.)
// Both internal tracking values are added up in the Write method. This has to
// be taken into account when it comes to precision and overflow behavior.
func NewCounter(opts CounterOpts) Counter {
desc := NewDesc(
BuildFQName(opts.Namespace, opts.Subsystem, opts.Name),
opts.Help,
nil,
opts.ConstLabels,
)
result := &counter{desc: desc, labelPairs: desc.constLabelPairs, now: time.Now}
result.init(result) // Init self-collection.
return result
}
type counter struct {
// valBits contains the bits of the represented float64 value, while
// valInt stores values that are exact integers. Both have to go first
// in the struct to guarantee alignment for atomic operations.
// http://golang.org/pkg/sync/atomic/#pkg-note-BUG
valBits uint64
valInt uint64
selfCollector
desc *Desc
labelPairs []*dto.LabelPair
exemplar atomic.Value // Containing nil or a *dto.Exemplar.
now func() time.Time // To mock out time.Now() for testing.
}
func (c *counter) Desc() *Desc {
return c.desc
}
func (c *counter) Add(v float64) {
if v < 0 {
panic(errors.New("counter cannot decrease in value"))
}
ival := uint64(v)
if float64(ival) == v {
atomic.AddUint64(&c.valInt, ival)
return
}
for {
oldBits := atomic.LoadUint64(&c.valBits)
newBits := math.Float64bits(math.Float64frombits(oldBits) + v)
if atomic.CompareAndSwapUint64(&c.valBits, oldBits, newBits) {
return
}
}
}
func (c *counter) AddWithExemplar(v float64, e Labels) {
c.Add(v)
c.updateExemplar(v, e)
}
func (c *counter) Inc() {
atomic.AddUint64(&c.valInt, 1)
}
func (c *counter) Write(out *dto.Metric) error {
fval := math.Float64frombits(atomic.LoadUint64(&c.valBits))
ival := atomic.LoadUint64(&c.valInt)
val := fval + float64(ival)
var exemplar *dto.Exemplar
if e := c.exemplar.Load(); e != nil {
exemplar = e.(*dto.Exemplar)
}
return populateMetric(CounterValue, val, c.labelPairs, exemplar, out)
}
func (c *counter) updateExemplar(v float64, l Labels) {
if l == nil {
return
}
e, err := newExemplar(v, c.now(), l)
if err != nil {
panic(err)
}
c.exemplar.Store(e)
}
// CounterVec is a Collector that bundles a set of Counters that all share the
// same Desc, but have different values for their variable labels. This is used
// if you want to count the same thing partitioned by various dimensions
// (e.g. number of HTTP requests, partitioned by response code and
// method). Create instances with NewCounterVec.
type CounterVec struct {
*metricVec
}
// NewCounterVec creates a new CounterVec based on the provided CounterOpts and
// partitioned by the given label names.
func NewCounterVec(opts CounterOpts, labelNames []string) *CounterVec {
desc := NewDesc(
BuildFQName(opts.Namespace, opts.Subsystem, opts.Name),
opts.Help,
labelNames,
opts.ConstLabels,
)
return &CounterVec{
metricVec: newMetricVec(desc, func(lvs ...string) Metric {
if len(lvs) != len(desc.variableLabels) {
panic(makeInconsistentCardinalityError(desc.fqName, desc.variableLabels, lvs))
}
result := &counter{desc: desc, labelPairs: makeLabelPairs(desc, lvs), now: time.Now}
result.init(result) // Init self-collection.
return result
}),
}
}
// GetMetricWithLabelValues returns the Counter for the given slice of label
// values (same order as the VariableLabels in Desc). If that combination of
// label values is accessed for the first time, a new Counter is created.
//
// It is possible to call this method without using the returned Counter to only
// create the new Counter but leave it at its starting value 0. See also the
// SummaryVec example.
//
// Keeping the Counter for later use is possible (and should be considered if
// performance is critical), but keep in mind that Reset, DeleteLabelValues and
// Delete can be used to delete the Counter from the CounterVec. In that case,
// the Counter will still exist, but it will not be exported anymore, even if a
// Counter with the same label values is created later.
//
// An error is returned if the number of label values is not the same as the
// number of VariableLabels in Desc (minus any curried labels).
//
// Note that for more than one label value, this method is prone to mistakes
// caused by an incorrect order of arguments. Consider GetMetricWith(Labels) as
// an alternative to avoid that type of mistake. For higher label numbers, the
// latter has a much more readable (albeit more verbose) syntax, but it comes
// with a performance overhead (for creating and processing the Labels map).
// See also the GaugeVec example.
func (v *CounterVec) GetMetricWithLabelValues(lvs ...string) (Counter, error) {
metric, err := v.metricVec.getMetricWithLabelValues(lvs...)
if metric != nil {
return metric.(Counter), err
}
return nil, err
}
// GetMetricWith returns the Counter for the given Labels map (the label names
// must match those of the VariableLabels in Desc). If that label map is
// accessed for the first time, a new Counter is created. Implications of
// creating a Counter without using it and keeping the Counter for later use are
// the same as for GetMetricWithLabelValues.
//
// An error is returned if the number and names of the Labels are inconsistent
// with those of the VariableLabels in Desc (minus any curried labels).
//
// This method is used for the same purpose as
// GetMetricWithLabelValues(...string). See there for pros and cons of the two
// methods.
func (v *CounterVec) GetMetricWith(labels Labels) (Counter, error) {
metric, err := v.metricVec.getMetricWith(labels)
if metric != nil {
return metric.(Counter), err
}
return nil, err
}
// WithLabelValues works as GetMetricWithLabelValues, but panics where
// GetMetricWithLabelValues would have returned an error. Not returning an
// error allows shortcuts like
// myVec.WithLabelValues("404", "GET").Add(42)
func (v *CounterVec) WithLabelValues(lvs ...string) Counter {
c, err := v.GetMetricWithLabelValues(lvs...)
if err != nil {
panic(err)
}
return c
}
// With works as GetMetricWith, but panics where GetMetricWithLabels would have
// returned an error. Not returning an error allows shortcuts like
// myVec.With(prometheus.Labels{"code": "404", "method": "GET"}).Add(42)
func (v *CounterVec) With(labels Labels) Counter {
c, err := v.GetMetricWith(labels)
if err != nil {
panic(err)
}
return c
}
// CurryWith returns a vector curried with the provided labels, i.e. the
// returned vector has those labels pre-set for all labeled operations performed
// on it. The cardinality of the curried vector is reduced accordingly. The
// order of the remaining labels stays the same (just with the curried labels
// taken out of the sequence which is relevant for the
// (GetMetric)WithLabelValues methods). It is possible to curry a curried
// vector, but only with labels not yet used for currying before.
//
// The metrics contained in the CounterVec are shared between the curried and
// uncurried vectors. They are just accessed differently. Curried and uncurried
// vectors behave identically in terms of collection. Only one must be
// registered with a given registry (usually the uncurried version). The Reset
// method deletes all metrics, even if called on a curried vector.
func (v *CounterVec) CurryWith(labels Labels) (*CounterVec, error) {
vec, err := v.curryWith(labels)
if vec != nil {
return &CounterVec{vec}, err
}
return nil, err
}
// MustCurryWith works as CurryWith but panics where CurryWith would have
// returned an error.
func (v *CounterVec) MustCurryWith(labels Labels) *CounterVec {
vec, err := v.CurryWith(labels)
if err != nil {
panic(err)
}
return vec
}
// CounterFunc is a Counter whose value is determined at collect time by calling a
// provided function.
//
// To create CounterFunc instances, use NewCounterFunc.
type CounterFunc interface {
Metric
Collector
}
// NewCounterFunc creates a new CounterFunc based on the provided
// CounterOpts. The value reported is determined by calling the given function
// from within the Write method. Take into account that metric collection may
// happen concurrently. If that results in concurrent calls to Write, like in
// the case where a CounterFunc is directly registered with Prometheus, the
// provided function must be concurrency-safe. The function should also honor
// the contract for a Counter (values only go up, not down), but compliance will
// not be checked.
func NewCounterFunc(opts CounterOpts, function func() float64) CounterFunc {
return newValueFunc(NewDesc(
BuildFQName(opts.Namespace, opts.Subsystem, opts.Name),
opts.Help,
nil,
opts.ConstLabels,
), CounterValue, function)
}