client_golang/prometheus/summary.go

614 lines
19 KiB
Go
Raw Normal View History

// Copyright 2014 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package prometheus
import (
"fmt"
"math"
"sort"
"sync"
"time"
2015-02-27 18:12:59 +03:00
"github.com/beorn7/perks/quantile"
"github.com/golang/protobuf/proto"
dto "github.com/prometheus/client_model/go"
)
// quantileLabel is used for the label that defines the quantile in a
// summary.
const quantileLabel = "quantile"
// A Summary captures individual observations from an event or sample stream and
// summarizes them in a manner similar to traditional summary statistics: 1. sum
// of observations, 2. observation count, 3. rank estimations.
//
// A typical use-case is the observation of request latencies. By default, a
// Summary provides the median, the 90th and the 99th percentile of the latency
2017-09-13 13:48:29 +03:00
// as rank estimations. However, the default behavior will change in the
// upcoming v0.10 of the library. There will be no rank estimations at all by
2017-09-13 13:48:29 +03:00
// default. For a sane transition, it is recommended to set the desired rank
// estimations explicitly.
//
// Note that the rank estimations cannot be aggregated in a meaningful way with
// the Prometheus query language (i.e. you cannot average or add them). If you
// need aggregatable quantiles (e.g. you want the 99th percentile latency of all
// queries served across all instances of a service), consider the Histogram
// metric type. See the Prometheus documentation for more details.
//
// To create Summary instances, use NewSummary.
type Summary interface {
Metric
Collector
// Observe adds a single observation to the summary.
Observe(float64)
}
var errQuantileLabelNotAllowed = fmt.Errorf(
"%q is not allowed as label name in summaries", quantileLabel,
)
// Default values for SummaryOpts.
const (
// DefMaxAge is the default duration for which observations stay
// relevant.
DefMaxAge time.Duration = 10 * time.Minute
// DefAgeBuckets is the default number of buckets used to calculate the
// age of observations.
DefAgeBuckets = 5
// DefBufCap is the standard buffer size for collecting Summary observations.
DefBufCap = 500
)
// SummaryOpts bundles the options for creating a Summary metric. It is
// mandatory to set Name to a non-empty string. While all other fields are
// optional and can safely be left at their zero value, it is recommended to set
// a help string and to explicitly set the Objectives field to the desired value
// as the default value will change in the upcoming v0.10 of the library.
type SummaryOpts struct {
// Namespace, Subsystem, and Name are components of the fully-qualified
// name of the Summary (created by joining these components with
// "_"). Only Name is mandatory, the others merely help structuring the
// name. Note that the fully-qualified name of the Summary must be a
// valid Prometheus metric name.
Namespace string
Subsystem string
Name string
// Help provides information about this Summary.
//
// Metrics with the same fully-qualified name must have the same Help
// string.
Help string
// ConstLabels are used to attach fixed labels to this metric. Metrics
// with the same fully-qualified name must have the same label names in
// their ConstLabels.
//
// Due to the way a Summary is represented in the Prometheus text format
// and how it is handled by the Prometheus server internally, “quantile”
// is an illegal label name. Construction of a Summary or SummaryVec
// will panic if this label name is used in ConstLabels.
//
// ConstLabels are only used rarely. In particular, do not use them to
// attach the same labels to all your metrics. Those use cases are
// better covered by target labels set by the scraping Prometheus
// server, or by one specific metric (e.g. a build_info or a
// machine_role metric). See also
// https://prometheus.io/docs/instrumenting/writing_exporters/#target-labels,-not-static-scraped-labels
ConstLabels Labels
// Objectives defines the quantile rank estimates with their respective
// absolute error. If Objectives[q] = e, then the value reported for q
// will be the φ-quantile value for some φ between q-e and q+e. The
// default value is an empty map, resulting in a summary without
// quantiles.
Objectives map[float64]float64
// MaxAge defines the duration for which an observation stays relevant
// for the summary. Must be positive. The default value is DefMaxAge.
MaxAge time.Duration
// AgeBuckets is the number of buckets used to exclude observations that
// are older than MaxAge from the summary. A higher number has a
// resource penalty, so only increase it if the higher resolution is
// really required. For very high observation rates, you might want to
// reduce the number of age buckets. With only one age bucket, you will
// effectively see a complete reset of the summary each time MaxAge has
// passed. The default value is DefAgeBuckets.
AgeBuckets uint32
// BufCap defines the default sample stream buffer size. The default
// value of DefBufCap should suffice for most uses. If there is a need
// to increase the value, a multiple of 500 is recommended (because that
// is the internal buffer size of the underlying package
// "github.com/bmizerany/perks/quantile").
BufCap uint32
}
Create a public registry interface and separate out HTTP exposition General context and approch =========================== This is the first part of the long awaited wider refurbishment of `client_golang/prometheus/...`. After a lot of struggling, I decided to not go for one breaking big-bang, but cut things into smaller steps after all, mostly to keep the changes manageable and easy to review. I'm aiming for having the invasive breaking changes concentrated in as few steps as possible (ideally one). Some steps will not be breaking at all, but typically there will be breaking changes that only affect quite special cases so that 95+% of users will not be affected. This first step is an example for that, see details below. What's happening in this commit? ================================ This step is about finally creating an exported registry interface. This could not be done by simply export the existing internal implementation because the interface would be _way_ too fat. This commit introduces a qutie lean `Registry` interface (compared to the previous interval implementation). The functions that act on the default registry are retained (with very few exceptions) so that most use cases won't see a change. However, several of those are deprecated now to clean up the namespace in the future. The default registry is kept in the public variable `DefaultRegistry`. This follows the example of the http package in the standard library (cf. `http.DefaultServeMux`, `http.DefaultClient`) with the same implications. (This pattern is somewhat disputed within the Go community but I chose to go with the devil you know instead of creating something more complex or even disallowing any changes to the default registry. The current approach gives everybody the freedom to not touch DefaultRegistry or to do everything with a custom registry to play save.) Another important part in making the registry lean is the extraction of the HTTP exposition, which also allows for customization of the HTTP exposition. Note that the separation of metric collection and exposition has the side effect that managing the MetricFamily and Metric protobuf objects in a free-list or pool isn't really feasible anymore. By now (with better GC in more recent Go versions), the returns were anyway dimisishing. To be effective at all, scrapes had to happen more often than GC cycles, and even then most elements of the protobufs (everything excetp the MetricFamily and Metric structs themselves) would still cause allocation churn. In a future breaking change, the signature of the Write method in the Metric interface will be adjusted accordingly. In this commit, avoiding breakage is more important. The following issues are fixed by this commit (some solved "on the fly" now that I was touching the code anyway and it would have been stupid to port the bugs): https://github.com/prometheus/client_golang/issues/46 https://github.com/prometheus/client_golang/issues/100 https://github.com/prometheus/client_golang/issues/170 https://github.com/prometheus/client_golang/issues/205 Documentation including examples have been amended as required. What future changes does this commit enable? ============================================ The following items are not yet implemented, but this commit opens the possibility of implementing these independently. - The separation of the HTTP exposition allows the implementation of other exposition methods based on the Registry interface, as known from other Prometheus client libraries, e.g. sending the metrics to Graphite. Cf. https://github.com/prometheus/client_golang/issues/197 - The public `Registry` interface allows the implementation of convenience tools for testing metrics collection. Those tools can inspect the collected MetricFamily protobufs and compare them to expectation. Also, tests can use their own testing instance of a registry. Cf. https://github.com/prometheus/client_golang/issues/58 Notable non-goals of this commit ================================ Non-goals that will be tackled later ------------------------------------ The following two issues are quite closely connected to the changes in this commit but the line has been drawn deliberately to address them in later steps of the refurbishment: - `InstrumentHandler` has many known problems. The plan is to create a saner way to conveniently intrument HTTP handlers and remove the old `InstrumentHandler` altogether. To keep breakage low for now, even the default handler to expose metrics is still using the old `InstrumentHandler`. This leads to weird naming inconsistencies but I have deemed it better to not break the world right now but do it in the change that provides better ways of instrumenting HTTP handlers. Cf. https://github.com/prometheus/client_golang/issues/200 - There is work underway to make the whole handling of metric descriptors (`Desc`) more intuitive and transparent for the user (including an ability for less strict checking, cf. https://github.com/prometheus/client_golang/issues/47). That's quite invasive from the perspective of the internal code, namely the registry. I deliberately kept those changes out of this commit. - While this commit adds new external dependency, the effort to vendor anything within the library that is not visible in any exported types will have to be done later. Non-goals that _might_ be tackled later --------------------------------------- There is a strong and understandable urge to divide the `prometheus` package into a number of sub-packages (like `registry`, `collectors`, `http`, `metrics`, …). However, to not run into a multitude of circular import chains, this would need to break every single existing usage of the library. (As just one example, if the ubiquitious `prometheus.MustRegister` (with more than 2,000 uses on GitHub alone) is kept in the `prometheus` package, but the other registry concerns go into a new `registry` package, then the `prometheus` package would import the `registry` package (to call the actual register method), while at the same time the `registry` package needs to import the `prometheus` package to access `Collector`, `Metric`, `Desc` and more. If we moved `MustRegister` into the `registry` package, thousands of code lines would have to be fixed (which would be easy if the world was a mono repo, but it is not). If we moved everything else the proposed registry package needs into packages of their own, we would break thousands of other code lines.) The main problem is really the top-level functions like `MustRegister`, `Handler`, …, which effectively pull everything into one package. Those functions are however very convenient for the easy and very frequent use-cases. This problem has to be revisited later. For now, I'm trying to keep the amount of exported names in the package as low as possible (e.g. I unexported expvarCollector in this commit because the NewExpvarCollector constructor is enough to export, and it is now consistent with other collectors, like the goCollector). Non-goals that won't be tackled anytime soon -------------------------------------------- Something that I have played with a lot is "streaming collection", i.e. allow an implementation of the `Registry` interface that collects metrics incrementally and serves them while doing so. As it has turned out, this has many many issues and makes the `Registry` interface very clunky. Eventually, I made the call that it is unlikely we will really implement streaming collection; and making the interface more clunky for something that might not even happen is really a big no-no. Note that the `Registry` interface only creates the in-memory representation of the metric family protobufs in one go. The serializaton onto the wire can still be handled in a streaming fashion (which hasn't been done so far, without causing any trouble, but might be done in the future without breaking any interfaces). What are the breaking changes? ============================== - Signatures of functions pushing to Pushgateway have changed to allow arbitrary grouping (which was planned for a long time anyway, and now that I had to work on the Push code anyway for the registry refurbishment, I finally did it, cf. https://github.com/prometheus/client_golang/issues/100). With the gained insight that pushing to the default registry is almost never the right thing, and now that we are breaking the Push call anyway, all the Push functions were moved to their own package, which cleans up the namespace and is more idiomatic (pushing Collectors is now literally done by `push.Collectors(...)`). - The registry is doing more consistency checks by default now. Past creators of inconsistent metrics could have masked the problem by not setting `EnableCollectChecks`. Those inconsistencies will now be detected. (But note that a "best effort" metrics collection is now possible with `HandlerOpts.ErrorHandling = ContinueOnError`.) - `EnableCollectChecks` is gone. The registry is now performing some of those checks anyway (see previous item), and a registry with all of those checks can now be created with `NewPedanticRegistry` (only used for testing). - `PanicOnCollectError` is gone. This behavior can now be configured when creating a custom HTTP handler.
2016-07-20 18:11:14 +03:00
// Great fuck-up with the sliding-window decay algorithm... The Merge method of
// perk/quantile is actually not working as advertised - and it might be
// unfixable, as the underlying algorithm is apparently not capable of merging
// summaries in the first place. To avoid using Merge, we are currently adding
// observations to _each_ age bucket, i.e. the effort to add a sample is
// essentially multiplied by the number of age buckets. When rotating age
// buckets, we empty the previous head stream. On scrape time, we simply take
// the quantiles from the head stream (no merging required). Result: More effort
// on observation time, less effort on scrape time, which is exactly the
// opposite of what we try to accomplish, but at least the results are correct.
//
// The quite elegant previous contraption to merge the age buckets efficiently
// on scrape time (see code up commit 6b9530d72ea715f0ba612c0120e6e09fbf1d49d0)
// can't be used anymore.
// NewSummary creates a new Summary based on the provided SummaryOpts.
func NewSummary(opts SummaryOpts) Summary {
return newSummary(
NewDesc(
BuildFQName(opts.Namespace, opts.Subsystem, opts.Name),
opts.Help,
nil,
opts.ConstLabels,
),
opts,
)
}
func newSummary(desc *Desc, opts SummaryOpts, labelValues ...string) Summary {
if len(desc.variableLabels) != len(labelValues) {
panic(makeInconsistentCardinalityError(desc.fqName, desc.variableLabels, labelValues))
}
for _, n := range desc.variableLabels {
if n == quantileLabel {
panic(errQuantileLabelNotAllowed)
}
}
for _, lp := range desc.constLabelPairs {
if lp.GetName() == quantileLabel {
panic(errQuantileLabelNotAllowed)
}
}
if opts.Objectives == nil {
opts.Objectives = map[float64]float64{}
}
if opts.MaxAge < 0 {
panic(fmt.Errorf("illegal max age MaxAge=%v", opts.MaxAge))
}
if opts.MaxAge == 0 {
opts.MaxAge = DefMaxAge
}
if opts.AgeBuckets == 0 {
opts.AgeBuckets = DefAgeBuckets
}
if opts.BufCap == 0 {
opts.BufCap = DefBufCap
}
s := &summary{
desc: desc,
objectives: opts.Objectives,
sortedObjectives: make([]float64, 0, len(opts.Objectives)),
labelPairs: makeLabelPairs(desc, labelValues),
hotBuf: make([]float64, 0, opts.BufCap),
coldBuf: make([]float64, 0, opts.BufCap),
streamDuration: opts.MaxAge / time.Duration(opts.AgeBuckets),
}
s.headStreamExpTime = time.Now().Add(s.streamDuration)
s.hotBufExpTime = s.headStreamExpTime
for i := uint32(0); i < opts.AgeBuckets; i++ {
s.streams = append(s.streams, s.newStream())
}
s.headStream = s.streams[0]
for qu := range s.objectives {
s.sortedObjectives = append(s.sortedObjectives, qu)
}
sort.Float64s(s.sortedObjectives)
s.init(s) // Init self-collection.
return s
}
type summary struct {
selfCollector
bufMtx sync.Mutex // Protects hotBuf and hotBufExpTime.
mtx sync.Mutex // Protects every other moving part.
// Lock bufMtx before mtx if both are needed.
desc *Desc
objectives map[float64]float64
sortedObjectives []float64
labelPairs []*dto.LabelPair
sum float64
cnt uint64
hotBuf, coldBuf []float64
streams []*quantile.Stream
streamDuration time.Duration
headStream *quantile.Stream
headStreamIdx int
headStreamExpTime, hotBufExpTime time.Time
}
func (s *summary) Desc() *Desc {
return s.desc
}
func (s *summary) Observe(v float64) {
s.bufMtx.Lock()
defer s.bufMtx.Unlock()
now := time.Now()
if now.After(s.hotBufExpTime) {
s.asyncFlush(now)
}
s.hotBuf = append(s.hotBuf, v)
if len(s.hotBuf) == cap(s.hotBuf) {
s.asyncFlush(now)
}
}
Allow error reporting during metrics collection and simplify Register(). Both are interface changes I want to get in before public announcement. They only break rare usage cases, and are always easy to fix, but still we want to avoid breaking changes after a wider announcement of the project. The change of Register() simply removes the return of the Collector, which nobody was using in practice. It was just bloating the call syntax. Note that this is different from RegisterOrGet(), which is used at various occasions where you want to register something that might or might not be registered already, but if it is, you want the previously registered Collector back (because that's the relevant one). WRT error reporting: I first tried the obvious way of letting the Collector methods Describe() and Collect() return error. However, I had to conclude that that bloated _many_ calls and their handling in very obnoxious ways. On the other hand, the case where you actually want to report errors during registration or collection is very rare. Hence, this approach has the wrong trade-off. The approach taken here might at first appear clunky but is in practice quite handy, mostly because there is almost no change for the "normal" case of "no special error handling", but also because it plays well with the way descriptors and metrics are handled (via channels). Explaining the approach in more detail: - During registration / describe: Error handling was actually already in place (for invalid descriptors, which carry an error anyway). I only added a convenience function to create an invalid descriptor with a given error on purpose. - Metrics are now treated in a similar way. The Write method returns an error now (the only change in interface). An "invalid metric" is provided that can be sent via the channel to signal that that metric could not be collected. It alse transports an error. NON-GOALS OF THIS COMMIT: This is NOT yet the major improvement of the whole registry part, where we want a public Registry interface and plenty of modular configurations (for error handling, various auto-metrics, http instrumentation, testing, ...). However, we can do that whole thing without breaking existing interfaces. For now (which is a significant issue) any error during collection will either cause a 500 HTTP response or a panic (depending on registry config). Later, we definitely want to have a possibility to skip (and only report somehow) non-collectible metrics instead of aborting the whole scrape.
2015-01-12 21:16:09 +03:00
func (s *summary) Write(out *dto.Metric) error {
sum := &dto.Summary{}
qs := make([]*dto.Quantile, 0, len(s.objectives))
s.bufMtx.Lock()
s.mtx.Lock()
// Swap bufs even if hotBuf is empty to set new hotBufExpTime.
s.swapBufs(time.Now())
s.bufMtx.Unlock()
s.flushColdBuf()
sum.SampleCount = proto.Uint64(s.cnt)
sum.SampleSum = proto.Float64(s.sum)
for _, rank := range s.sortedObjectives {
var q float64
if s.headStream.Count() == 0 {
q = math.NaN()
} else {
q = s.headStream.Query(rank)
}
qs = append(qs, &dto.Quantile{
Quantile: proto.Float64(rank),
Value: proto.Float64(q),
})
}
s.mtx.Unlock()
if len(qs) > 0 {
sort.Sort(quantSort(qs))
}
sum.Quantile = qs
out.Summary = sum
out.Label = s.labelPairs
Allow error reporting during metrics collection and simplify Register(). Both are interface changes I want to get in before public announcement. They only break rare usage cases, and are always easy to fix, but still we want to avoid breaking changes after a wider announcement of the project. The change of Register() simply removes the return of the Collector, which nobody was using in practice. It was just bloating the call syntax. Note that this is different from RegisterOrGet(), which is used at various occasions where you want to register something that might or might not be registered already, but if it is, you want the previously registered Collector back (because that's the relevant one). WRT error reporting: I first tried the obvious way of letting the Collector methods Describe() and Collect() return error. However, I had to conclude that that bloated _many_ calls and their handling in very obnoxious ways. On the other hand, the case where you actually want to report errors during registration or collection is very rare. Hence, this approach has the wrong trade-off. The approach taken here might at first appear clunky but is in practice quite handy, mostly because there is almost no change for the "normal" case of "no special error handling", but also because it plays well with the way descriptors and metrics are handled (via channels). Explaining the approach in more detail: - During registration / describe: Error handling was actually already in place (for invalid descriptors, which carry an error anyway). I only added a convenience function to create an invalid descriptor with a given error on purpose. - Metrics are now treated in a similar way. The Write method returns an error now (the only change in interface). An "invalid metric" is provided that can be sent via the channel to signal that that metric could not be collected. It alse transports an error. NON-GOALS OF THIS COMMIT: This is NOT yet the major improvement of the whole registry part, where we want a public Registry interface and plenty of modular configurations (for error handling, various auto-metrics, http instrumentation, testing, ...). However, we can do that whole thing without breaking existing interfaces. For now (which is a significant issue) any error during collection will either cause a 500 HTTP response or a panic (depending on registry config). Later, we definitely want to have a possibility to skip (and only report somehow) non-collectible metrics instead of aborting the whole scrape.
2015-01-12 21:16:09 +03:00
return nil
}
func (s *summary) newStream() *quantile.Stream {
return quantile.NewTargeted(s.objectives)
}
// asyncFlush needs bufMtx locked.
func (s *summary) asyncFlush(now time.Time) {
s.mtx.Lock()
s.swapBufs(now)
// Unblock the original goroutine that was responsible for the mutation
// that triggered the compaction. But hold onto the global non-buffer
// state mutex until the operation finishes.
go func() {
s.flushColdBuf()
s.mtx.Unlock()
}()
}
// rotateStreams needs mtx AND bufMtx locked.
func (s *summary) maybeRotateStreams() {
for !s.hotBufExpTime.Equal(s.headStreamExpTime) {
s.headStream.Reset()
s.headStreamIdx++
if s.headStreamIdx >= len(s.streams) {
s.headStreamIdx = 0
}
s.headStream = s.streams[s.headStreamIdx]
s.headStreamExpTime = s.headStreamExpTime.Add(s.streamDuration)
}
}
// flushColdBuf needs mtx locked.
func (s *summary) flushColdBuf() {
for _, v := range s.coldBuf {
for _, stream := range s.streams {
stream.Insert(v)
}
s.cnt++
s.sum += v
}
s.coldBuf = s.coldBuf[0:0]
s.maybeRotateStreams()
}
// swapBufs needs mtx AND bufMtx locked, coldBuf must be empty.
func (s *summary) swapBufs(now time.Time) {
if len(s.coldBuf) != 0 {
panic("coldBuf is not empty")
}
s.hotBuf, s.coldBuf = s.coldBuf, s.hotBuf
// hotBuf is now empty and gets new expiration set.
for now.After(s.hotBufExpTime) {
s.hotBufExpTime = s.hotBufExpTime.Add(s.streamDuration)
}
}
type quantSort []*dto.Quantile
func (s quantSort) Len() int {
return len(s)
}
func (s quantSort) Swap(i, j int) {
s[i], s[j] = s[j], s[i]
}
func (s quantSort) Less(i, j int) bool {
return s[i].GetQuantile() < s[j].GetQuantile()
}
// SummaryVec is a Collector that bundles a set of Summaries that all share the
// same Desc, but have different values for their variable labels. This is used
// if you want to count the same thing partitioned by various dimensions
// (e.g. HTTP request latencies, partitioned by status code and method). Create
// instances with NewSummaryVec.
type SummaryVec struct {
*metricVec
}
// NewSummaryVec creates a new SummaryVec based on the provided SummaryOpts and
// partitioned by the given label names.
//
// Due to the way a Summary is represented in the Prometheus text format and how
// it is handled by the Prometheus server internally, “quantile” is an illegal
// label name. NewSummaryVec will panic if this label name is used.
func NewSummaryVec(opts SummaryOpts, labelNames []string) *SummaryVec {
for _, ln := range labelNames {
if ln == quantileLabel {
panic(errQuantileLabelNotAllowed)
}
}
desc := NewDesc(
BuildFQName(opts.Namespace, opts.Subsystem, opts.Name),
opts.Help,
labelNames,
opts.ConstLabels,
)
return &SummaryVec{
metricVec: newMetricVec(desc, func(lvs ...string) Metric {
return newSummary(desc, opts, lvs...)
}),
}
}
// GetMetricWithLabelValues returns the Summary for the given slice of label
// values (same order as the VariableLabels in Desc). If that combination of
// label values is accessed for the first time, a new Summary is created.
//
// It is possible to call this method without using the returned Summary to only
// create the new Summary but leave it at its starting value, a Summary without
// any observations.
//
// Keeping the Summary for later use is possible (and should be considered if
// performance is critical), but keep in mind that Clear, RemoveLabelValues and
// Remove can be used to remove the Summary from the SummaryVec. In that case,
// the Summary will still exist, but it will not be exported anymore, even if a
// Summary with the same label values is created later. See also the CounterVec
// example.
//
// An error is returned if the number of label values is not the same as the
// number of VariableLabels in Desc (minus any curried labels).
//
// Note that for more than one label value, this method is prone to mistakes
// caused by an incorrect order of arguments. Consider GetMetricWith(Labels) as
// an alternative to avoid that type of mistake. For higher label numbers, the
// latter has a much more readable (albeit more verbose) syntax, but it comes
// with a performance overhead (for creating and processing the Labels map).
// See also the GaugeVec example.
func (v *SummaryVec) GetMetricWithLabelValues(lvs ...string) (Observer, error) {
metric, err := v.metricVec.getMetricWithLabelValues(lvs...)
if metric != nil {
return metric.(Observer), err
}
return nil, err
}
// GetMetricWith returns the Summary for the given Labels map (the label names
// must match those of the VariableLabels in Desc). If that label map is
// accessed for the first time, a new Summary is created. Implications of
// creating a Summary without using it and keeping the Summary for later use are
// the same as for GetMetricWithLabelValues.
//
// An error is returned if the number and names of the Labels are inconsistent
// with those of the VariableLabels in Desc (minus any curried labels).
//
// This method is used for the same purpose as
// GetMetricWithLabelValues(...string). See there for pros and cons of the two
// methods.
func (v *SummaryVec) GetMetricWith(labels Labels) (Observer, error) {
metric, err := v.metricVec.getMetricWith(labels)
if metric != nil {
return metric.(Observer), err
}
return nil, err
}
// WithLabelValues works as GetMetricWithLabelValues, but panics where
// GetMetricWithLabelValues would have returned an error. Not returning an
// error allows shortcuts like
// myVec.WithLabelValues("404", "GET").Observe(42.21)
func (v *SummaryVec) WithLabelValues(lvs ...string) Observer {
s, err := v.GetMetricWithLabelValues(lvs...)
if err != nil {
panic(err)
}
return s
}
// With works as GetMetricWith, but panics where GetMetricWithLabels would have
// returned an error. Not returning an error allows shortcuts like
// myVec.With(prometheus.Labels{"code": "404", "method": "GET"}).Observe(42.21)
func (v *SummaryVec) With(labels Labels) Observer {
s, err := v.GetMetricWith(labels)
if err != nil {
panic(err)
}
return s
}
// CurryWith returns a vector curried with the provided labels, i.e. the
// returned vector has those labels pre-set for all labeled operations performed
// on it. The cardinality of the curried vector is reduced accordingly. The
// order of the remaining labels stays the same (just with the curried labels
// taken out of the sequence which is relevant for the
// (GetMetric)WithLabelValues methods). It is possible to curry a curried
// vector, but only with labels not yet used for currying before.
//
// The metrics contained in the SummaryVec are shared between the curried and
// uncurried vectors. They are just accessed differently. Curried and uncurried
// vectors behave identically in terms of collection. Only one must be
// registered with a given registry (usually the uncurried version). The Clear
// method deletes all metrics, even if called on a curried vector.
func (v *SummaryVec) CurryWith(labels Labels) (ObserverVec, error) {
vec, err := v.curryWith(labels)
if vec != nil {
return &SummaryVec{vec}, err
}
return nil, err
}
// MustCurryWith works as CurryWith but panics where CurryWith would have
// returned an error.
func (v *SummaryVec) MustCurryWith(labels Labels) ObserverVec {
vec, err := v.CurryWith(labels)
if err != nil {
panic(err)
}
return vec
}
type constSummary struct {
desc *Desc
count uint64
sum float64
quantiles map[float64]float64
labelPairs []*dto.LabelPair
}
func (s *constSummary) Desc() *Desc {
return s.desc
}
func (s *constSummary) Write(out *dto.Metric) error {
sum := &dto.Summary{}
qs := make([]*dto.Quantile, 0, len(s.quantiles))
sum.SampleCount = proto.Uint64(s.count)
sum.SampleSum = proto.Float64(s.sum)
for rank, q := range s.quantiles {
qs = append(qs, &dto.Quantile{
Quantile: proto.Float64(rank),
Value: proto.Float64(q),
})
}
if len(qs) > 0 {
sort.Sort(quantSort(qs))
}
sum.Quantile = qs
out.Summary = sum
out.Label = s.labelPairs
return nil
}
// NewConstSummary returns a metric representing a Prometheus summary with fixed
// values for the count, sum, and quantiles. As those parameters cannot be
// changed, the returned value does not implement the Summary interface (but
// only the Metric interface). Users of this package will not have much use for
// it in regular operations. However, when implementing custom Collectors, it is
// useful as a throw-away metric that is generated on the fly to send it to
// Prometheus in the Collect method.
//
// quantiles maps ranks to quantile values. For example, a median latency of
// 0.23s and a 99th percentile latency of 0.56s would be expressed as:
// map[float64]float64{0.5: 0.23, 0.99: 0.56}
//
// NewConstSummary returns an error if the length of labelValues is not
// consistent with the variable labels in Desc or if Desc is invalid.
func NewConstSummary(
desc *Desc,
count uint64,
sum float64,
quantiles map[float64]float64,
labelValues ...string,
) (Metric, error) {
if desc.err != nil {
return nil, desc.err
}
2017-08-25 18:58:59 +03:00
if err := validateLabelValues(labelValues, len(desc.variableLabels)); err != nil {
return nil, err
}
return &constSummary{
desc: desc,
count: count,
sum: sum,
quantiles: quantiles,
labelPairs: makeLabelPairs(desc, labelValues),
}, nil
}
// MustNewConstSummary is a version of NewConstSummary that panics where
// NewConstMetric would have returned an error.
func MustNewConstSummary(
desc *Desc,
count uint64,
sum float64,
quantiles map[float64]float64,
labelValues ...string,
) Metric {
m, err := NewConstSummary(desc, count, sum, quantiles, labelValues...)
if err != nil {
panic(err)
}
return m
}