diff --git a/sqlite3.c b/sqlite3.c index 7d53444..7c6d3e2 100644 --- a/sqlite3.c +++ b/sqlite3.c @@ -1,6 +1,6 @@ /****************************************************************************** ** This file is an amalgamation of many separate C source files from SQLite -** version 3.8.0. By combining all the individual C code files into this +** version 3.8.4.1. By combining all the individual C code files into this ** single large file, the entire code can be compiled as a single translation ** unit. This allows many compilers to do optimizations that would not be ** possible if the files were compiled separately. Performance improvements @@ -60,6 +60,11 @@ ** in Red Hat 6.0, so the code won't work. Hence, for maximum binary ** portability you should omit LFS. ** +** The previous paragraph was written in 2005. (This paragraph is written +** on 2008-11-28.) These days, all Linux kernels support large files, so +** you should probably leave LFS enabled. But some embedded platforms might +** lack LFS in which case the SQLITE_DISABLE_LFS macro might still be useful. +** ** Similar is true for Mac OS X. LFS is only supported on Mac OS X 9 and later. */ #ifndef SQLITE_DISABLE_LFS @@ -71,480 +76,41 @@ #endif /* -** Include the configuration header output by 'configure' if we're using the -** autoconf-based build +** For MinGW, check to see if we can include the header file containing its +** version information, among other things. Normally, this internal MinGW +** header file would [only] be included automatically by other MinGW header +** files; however, the contained version information is now required by this +** header file to work around binary compatibility issues (see below) and +** this is the only known way to reliably obtain it. This entire #if block +** would be completely unnecessary if there was any other way of detecting +** MinGW via their preprocessor (e.g. if they customized their GCC to define +** some MinGW-specific macros). When compiling for MinGW, either the +** _HAVE_MINGW_H or _HAVE__MINGW_H (note the extra underscore) macro must be +** defined; otherwise, detection of conditions specific to MinGW will be +** disabled. */ -#ifdef _HAVE_SQLITE_CONFIG_H -#include "config.h" -#endif - -/************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/ -/************** Begin file sqliteLimit.h *************************************/ -/* -** 2007 May 7 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** -** This file defines various limits of what SQLite can process. -*/ - -/* -** The maximum length of a TEXT or BLOB in bytes. This also -** limits the size of a row in a table or index. -** -** The hard limit is the ability of a 32-bit signed integer -** to count the size: 2^31-1 or 2147483647. -*/ -#ifndef SQLITE_MAX_LENGTH -# define SQLITE_MAX_LENGTH 1000000000 +#if defined(_HAVE_MINGW_H) +# include "mingw.h" +#elif defined(_HAVE__MINGW_H) +# include "_mingw.h" #endif /* -** This is the maximum number of -** -** * Columns in a table -** * Columns in an index -** * Columns in a view -** * Terms in the SET clause of an UPDATE statement -** * Terms in the result set of a SELECT statement -** * Terms in the GROUP BY or ORDER BY clauses of a SELECT statement. -** * Terms in the VALUES clause of an INSERT statement -** -** The hard upper limit here is 32676. Most database people will -** tell you that in a well-normalized database, you usually should -** not have more than a dozen or so columns in any table. And if -** that is the case, there is no point in having more than a few -** dozen values in any of the other situations described above. +** For MinGW version 4.x (and higher), check to see if the _USE_32BIT_TIME_T +** define is required to maintain binary compatibility with the MSVC runtime +** library in use (e.g. for Windows XP). */ -#ifndef SQLITE_MAX_COLUMN -# define SQLITE_MAX_COLUMN 2000 +#if !defined(_USE_32BIT_TIME_T) && !defined(_USE_64BIT_TIME_T) && \ + defined(_WIN32) && !defined(_WIN64) && \ + defined(__MINGW_MAJOR_VERSION) && __MINGW_MAJOR_VERSION >= 4 && \ + defined(__MSVCRT__) +# define _USE_32BIT_TIME_T #endif -/* -** The maximum length of a single SQL statement in bytes. -** -** It used to be the case that setting this value to zero would -** turn the limit off. That is no longer true. It is not possible -** to turn this limit off. +/* The public SQLite interface. The _FILE_OFFSET_BITS macro must appear +** first in QNX. Also, the _USE_32BIT_TIME_T macro must appear first for +** MinGW. */ -#ifndef SQLITE_MAX_SQL_LENGTH -# define SQLITE_MAX_SQL_LENGTH 1000000000 -#endif - -/* -** The maximum depth of an expression tree. This is limited to -** some extent by SQLITE_MAX_SQL_LENGTH. But sometime you might -** want to place more severe limits on the complexity of an -** expression. -** -** A value of 0 used to mean that the limit was not enforced. -** But that is no longer true. The limit is now strictly enforced -** at all times. -*/ -#ifndef SQLITE_MAX_EXPR_DEPTH -# define SQLITE_MAX_EXPR_DEPTH 1000 -#endif - -/* -** The maximum number of terms in a compound SELECT statement. -** The code generator for compound SELECT statements does one -** level of recursion for each term. A stack overflow can result -** if the number of terms is too large. In practice, most SQL -** never has more than 3 or 4 terms. Use a value of 0 to disable -** any limit on the number of terms in a compount SELECT. -*/ -#ifndef SQLITE_MAX_COMPOUND_SELECT -# define SQLITE_MAX_COMPOUND_SELECT 500 -#endif - -/* -** The maximum number of opcodes in a VDBE program. -** Not currently enforced. -*/ -#ifndef SQLITE_MAX_VDBE_OP -# define SQLITE_MAX_VDBE_OP 25000 -#endif - -/* -** The maximum number of arguments to an SQL function. -*/ -#ifndef SQLITE_MAX_FUNCTION_ARG -# define SQLITE_MAX_FUNCTION_ARG 127 -#endif - -/* -** The maximum number of in-memory pages to use for the main database -** table and for temporary tables. The SQLITE_DEFAULT_CACHE_SIZE -*/ -#ifndef SQLITE_DEFAULT_CACHE_SIZE -# define SQLITE_DEFAULT_CACHE_SIZE 2000 -#endif -#ifndef SQLITE_DEFAULT_TEMP_CACHE_SIZE -# define SQLITE_DEFAULT_TEMP_CACHE_SIZE 500 -#endif - -/* -** The default number of frames to accumulate in the log file before -** checkpointing the database in WAL mode. -*/ -#ifndef SQLITE_DEFAULT_WAL_AUTOCHECKPOINT -# define SQLITE_DEFAULT_WAL_AUTOCHECKPOINT 1000 -#endif - -/* -** The maximum number of attached databases. This must be between 0 -** and 62. The upper bound on 62 is because a 64-bit integer bitmap -** is used internally to track attached databases. -*/ -#ifndef SQLITE_MAX_ATTACHED -# define SQLITE_MAX_ATTACHED 10 -#endif - - -/* -** The maximum value of a ?nnn wildcard that the parser will accept. -*/ -#ifndef SQLITE_MAX_VARIABLE_NUMBER -# define SQLITE_MAX_VARIABLE_NUMBER 999 -#endif - -/* Maximum page size. The upper bound on this value is 65536. This a limit -** imposed by the use of 16-bit offsets within each page. -** -** Earlier versions of SQLite allowed the user to change this value at -** compile time. This is no longer permitted, on the grounds that it creates -** a library that is technically incompatible with an SQLite library -** compiled with a different limit. If a process operating on a database -** with a page-size of 65536 bytes crashes, then an instance of SQLite -** compiled with the default page-size limit will not be able to rollback -** the aborted transaction. This could lead to database corruption. -*/ -#ifdef SQLITE_MAX_PAGE_SIZE -# undef SQLITE_MAX_PAGE_SIZE -#endif -#define SQLITE_MAX_PAGE_SIZE 65536 - - -/* -** The default size of a database page. -*/ -#ifndef SQLITE_DEFAULT_PAGE_SIZE -# define SQLITE_DEFAULT_PAGE_SIZE 1024 -#endif -#if SQLITE_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE -# undef SQLITE_DEFAULT_PAGE_SIZE -# define SQLITE_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE -#endif - -/* -** Ordinarily, if no value is explicitly provided, SQLite creates databases -** with page size SQLITE_DEFAULT_PAGE_SIZE. However, based on certain -** device characteristics (sector-size and atomic write() support), -** SQLite may choose a larger value. This constant is the maximum value -** SQLite will choose on its own. -*/ -#ifndef SQLITE_MAX_DEFAULT_PAGE_SIZE -# define SQLITE_MAX_DEFAULT_PAGE_SIZE 8192 -#endif -#if SQLITE_MAX_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE -# undef SQLITE_MAX_DEFAULT_PAGE_SIZE -# define SQLITE_MAX_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE -#endif - - -/* -** Maximum number of pages in one database file. -** -** This is really just the default value for the max_page_count pragma. -** This value can be lowered (or raised) at run-time using that the -** max_page_count macro. -*/ -#ifndef SQLITE_MAX_PAGE_COUNT -# define SQLITE_MAX_PAGE_COUNT 1073741823 -#endif - -/* -** Maximum length (in bytes) of the pattern in a LIKE or GLOB -** operator. -*/ -#ifndef SQLITE_MAX_LIKE_PATTERN_LENGTH -# define SQLITE_MAX_LIKE_PATTERN_LENGTH 50000 -#endif - -/* -** Maximum depth of recursion for triggers. -** -** A value of 1 means that a trigger program will not be able to itself -** fire any triggers. A value of 0 means that no trigger programs at all -** may be executed. -*/ -#ifndef SQLITE_MAX_TRIGGER_DEPTH -# define SQLITE_MAX_TRIGGER_DEPTH 1000 -#endif - -/************** End of sqliteLimit.h *****************************************/ -/************** Continuing where we left off in sqliteInt.h ******************/ - -/* Disable nuisance warnings on Borland compilers */ -#if defined(__BORLANDC__) -#pragma warn -rch /* unreachable code */ -#pragma warn -ccc /* Condition is always true or false */ -#pragma warn -aus /* Assigned value is never used */ -#pragma warn -csu /* Comparing signed and unsigned */ -#pragma warn -spa /* Suspicious pointer arithmetic */ -#endif - -/* Needed for various definitions... */ -#ifndef _GNU_SOURCE -# define _GNU_SOURCE -#endif - -#if defined(__OpenBSD__) && !defined(_BSD_SOURCE) -# define _BSD_SOURCE -#endif - -/* -** Include standard header files as necessary -*/ -#ifdef HAVE_STDINT_H -#include -#endif -#ifdef HAVE_INTTYPES_H -#include -#endif - -/* -** The following macros are used to cast pointers to integers and -** integers to pointers. The way you do this varies from one compiler -** to the next, so we have developed the following set of #if statements -** to generate appropriate macros for a wide range of compilers. -** -** The correct "ANSI" way to do this is to use the intptr_t type. -** Unfortunately, that typedef is not available on all compilers, or -** if it is available, it requires an #include of specific headers -** that vary from one machine to the next. -** -** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on -** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)). -** So we have to define the macros in different ways depending on the -** compiler. -*/ -#if defined(__PTRDIFF_TYPE__) /* This case should work for GCC */ -# define SQLITE_INT_TO_PTR(X) ((void*)(__PTRDIFF_TYPE__)(X)) -# define SQLITE_PTR_TO_INT(X) ((int)(__PTRDIFF_TYPE__)(X)) -#elif !defined(__GNUC__) /* Works for compilers other than LLVM */ -# define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X]) -# define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0)) -#elif defined(HAVE_STDINT_H) /* Use this case if we have ANSI headers */ -# define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X)) -# define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X)) -#else /* Generates a warning - but it always works */ -# define SQLITE_INT_TO_PTR(X) ((void*)(X)) -# define SQLITE_PTR_TO_INT(X) ((int)(X)) -#endif - -/* -** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2. -** 0 means mutexes are permanently disable and the library is never -** threadsafe. 1 means the library is serialized which is the highest -** level of threadsafety. 2 means the library is multithreaded - multiple -** threads can use SQLite as long as no two threads try to use the same -** database connection at the same time. -** -** Older versions of SQLite used an optional THREADSAFE macro. -** We support that for legacy. -*/ -#if !defined(SQLITE_THREADSAFE) -# if defined(THREADSAFE) -# define SQLITE_THREADSAFE THREADSAFE -# else -# define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */ -# endif -#endif - -/* -** Powersafe overwrite is on by default. But can be turned off using -** the -DSQLITE_POWERSAFE_OVERWRITE=0 command-line option. -*/ -#ifndef SQLITE_POWERSAFE_OVERWRITE -# define SQLITE_POWERSAFE_OVERWRITE 1 -#endif - -/* -** The SQLITE_DEFAULT_MEMSTATUS macro must be defined as either 0 or 1. -** It determines whether or not the features related to -** SQLITE_CONFIG_MEMSTATUS are available by default or not. This value can -** be overridden at runtime using the sqlite3_config() API. -*/ -#if !defined(SQLITE_DEFAULT_MEMSTATUS) -# define SQLITE_DEFAULT_MEMSTATUS 1 -#endif - -/* -** Exactly one of the following macros must be defined in order to -** specify which memory allocation subsystem to use. -** -** SQLITE_SYSTEM_MALLOC // Use normal system malloc() -** SQLITE_WIN32_MALLOC // Use Win32 native heap API -** SQLITE_ZERO_MALLOC // Use a stub allocator that always fails -** SQLITE_MEMDEBUG // Debugging version of system malloc() -** -** On Windows, if the SQLITE_WIN32_MALLOC_VALIDATE macro is defined and the -** assert() macro is enabled, each call into the Win32 native heap subsystem -** will cause HeapValidate to be called. If heap validation should fail, an -** assertion will be triggered. -** -** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as -** the default. -*/ -#if defined(SQLITE_SYSTEM_MALLOC) \ - + defined(SQLITE_WIN32_MALLOC) \ - + defined(SQLITE_ZERO_MALLOC) \ - + defined(SQLITE_MEMDEBUG)>1 -# error "Two or more of the following compile-time configuration options\ - are defined but at most one is allowed:\ - SQLITE_SYSTEM_MALLOC, SQLITE_WIN32_MALLOC, SQLITE_MEMDEBUG,\ - SQLITE_ZERO_MALLOC" -#endif -#if defined(SQLITE_SYSTEM_MALLOC) \ - + defined(SQLITE_WIN32_MALLOC) \ - + defined(SQLITE_ZERO_MALLOC) \ - + defined(SQLITE_MEMDEBUG)==0 -# define SQLITE_SYSTEM_MALLOC 1 -#endif - -/* -** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the -** sizes of memory allocations below this value where possible. -*/ -#if !defined(SQLITE_MALLOC_SOFT_LIMIT) -# define SQLITE_MALLOC_SOFT_LIMIT 1024 -#endif - -/* -** We need to define _XOPEN_SOURCE as follows in order to enable -** recursive mutexes on most Unix systems and fchmod() on OpenBSD. -** But _XOPEN_SOURCE define causes problems for Mac OS X, so omit -** it. -*/ -#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__) -# define _XOPEN_SOURCE 600 -#endif - -/* -** NDEBUG and SQLITE_DEBUG are opposites. It should always be true that -** defined(NDEBUG)==!defined(SQLITE_DEBUG). If this is not currently true, -** make it true by defining or undefining NDEBUG. -** -** Setting NDEBUG makes the code smaller and faster by disabling the -** assert() statements in the code. So we want the default action -** to be for NDEBUG to be set and NDEBUG to be undefined only if SQLITE_DEBUG -** is set. Thus NDEBUG becomes an opt-in rather than an opt-out -** feature. -*/ -#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) -# define NDEBUG 1 -#endif -#if defined(NDEBUG) && defined(SQLITE_DEBUG) -# undef NDEBUG -#endif - -/* -** The testcase() macro is used to aid in coverage testing. When -** doing coverage testing, the condition inside the argument to -** testcase() must be evaluated both true and false in order to -** get full branch coverage. The testcase() macro is inserted -** to help ensure adequate test coverage in places where simple -** condition/decision coverage is inadequate. For example, testcase() -** can be used to make sure boundary values are tested. For -** bitmask tests, testcase() can be used to make sure each bit -** is significant and used at least once. On switch statements -** where multiple cases go to the same block of code, testcase() -** can insure that all cases are evaluated. -** -*/ -#ifdef SQLITE_COVERAGE_TEST -SQLITE_PRIVATE void sqlite3Coverage(int); -# define testcase(X) if( X ){ sqlite3Coverage(__LINE__); } -#else -# define testcase(X) -#endif - -/* -** The TESTONLY macro is used to enclose variable declarations or -** other bits of code that are needed to support the arguments -** within testcase() and assert() macros. -*/ -#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST) -# define TESTONLY(X) X -#else -# define TESTONLY(X) -#endif - -/* -** Sometimes we need a small amount of code such as a variable initialization -** to setup for a later assert() statement. We do not want this code to -** appear when assert() is disabled. The following macro is therefore -** used to contain that setup code. The "VVA" acronym stands for -** "Verification, Validation, and Accreditation". In other words, the -** code within VVA_ONLY() will only run during verification processes. -*/ -#ifndef NDEBUG -# define VVA_ONLY(X) X -#else -# define VVA_ONLY(X) -#endif - -/* -** The ALWAYS and NEVER macros surround boolean expressions which -** are intended to always be true or false, respectively. Such -** expressions could be omitted from the code completely. But they -** are included in a few cases in order to enhance the resilience -** of SQLite to unexpected behavior - to make the code "self-healing" -** or "ductile" rather than being "brittle" and crashing at the first -** hint of unplanned behavior. -** -** In other words, ALWAYS and NEVER are added for defensive code. -** -** When doing coverage testing ALWAYS and NEVER are hard-coded to -** be true and false so that the unreachable code they specify will -** not be counted as untested code. -*/ -#if defined(SQLITE_COVERAGE_TEST) -# define ALWAYS(X) (1) -# define NEVER(X) (0) -#elif !defined(NDEBUG) -# define ALWAYS(X) ((X)?1:(assert(0),0)) -# define NEVER(X) ((X)?(assert(0),1):0) -#else -# define ALWAYS(X) (X) -# define NEVER(X) (X) -#endif - -/* -** Return true (non-zero) if the input is a integer that is too large -** to fit in 32-bits. This macro is used inside of various testcase() -** macros to verify that we have tested SQLite for large-file support. -*/ -#define IS_BIG_INT(X) (((X)&~(i64)0xffffffff)!=0) - -/* -** The macro unlikely() is a hint that surrounds a boolean -** expression that is usually false. Macro likely() surrounds -** a boolean expression that is usually true. These hints could, -** in theory, be used by the compiler to generate better code, but -** currently they are just comments for human readers. -*/ -#define likely(X) (X) -#define unlikely(X) (X) - /************** Include sqlite3.h in the middle of sqliteInt.h ***************/ /************** Begin file sqlite3.h *****************************************/ /* @@ -656,9 +222,9 @@ extern "C" { ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.8.0" -#define SQLITE_VERSION_NUMBER 3008000 -#define SQLITE_SOURCE_ID "2013-08-07 23:15:52 3adb6c1bfda897859dc9cf9ae7f1e6719855ee68" +#define SQLITE_VERSION "3.8.4.1" +#define SQLITE_VERSION_NUMBER 3008004 +#define SQLITE_SOURCE_ID "2014-03-11 15:27:36 018d317b1257ce68a92908b05c9c7cf1494050d0" /* ** CAPI3REF: Run-Time Library Version Numbers @@ -919,7 +485,7 @@ typedef int (*sqlite3_callback)(void*,int,char**, char**); ** */ #define SQLITE_FCNTL_LOCKSTATE 1 @@ -1478,6 +1077,10 @@ struct sqlite3_io_methods { #define SQLITE_FCNTL_BUSYHANDLER 15 #define SQLITE_FCNTL_TEMPFILENAME 16 #define SQLITE_FCNTL_MMAP_SIZE 18 +#define SQLITE_FCNTL_TRACE 19 +#define SQLITE_FCNTL_HAS_MOVED 20 +#define SQLITE_FCNTL_SYNC 21 +#define SQLITE_FCNTL_COMMIT_PHASETWO 22 /* ** CAPI3REF: Mutex Handle @@ -1922,7 +1525,7 @@ SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...); ** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0, ** that causes the corresponding memory allocation to fail. ** -** The xInit method initializes the memory allocator. (For example, +** The xInit method initializes the memory allocator. For example, ** it might allocate any require mutexes or initialize internal data ** structures. The xShutdown method is invoked (indirectly) by ** [sqlite3_shutdown()] and should deallocate any resources acquired @@ -2164,27 +1767,27 @@ struct sqlite3_mem_methods { ** function must be threadsafe. ** ** [[SQLITE_CONFIG_URI]]
SQLITE_CONFIG_URI -**
This option takes a single argument of type int. If non-zero, then +**
^(This option takes a single argument of type int. If non-zero, then ** URI handling is globally enabled. If the parameter is zero, then URI handling -** is globally disabled. If URI handling is globally enabled, all filenames +** is globally disabled.)^ ^If URI handling is globally enabled, all filenames ** passed to [sqlite3_open()], [sqlite3_open_v2()], [sqlite3_open16()] or ** specified as part of [ATTACH] commands are interpreted as URIs, regardless ** of whether or not the [SQLITE_OPEN_URI] flag is set when the database -** connection is opened. If it is globally disabled, filenames are +** connection is opened. ^If it is globally disabled, filenames are ** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the -** database connection is opened. By default, URI handling is globally +** database connection is opened. ^(By default, URI handling is globally ** disabled. The default value may be changed by compiling with the -** [SQLITE_USE_URI] symbol defined. +** [SQLITE_USE_URI] symbol defined.)^ ** ** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]]
SQLITE_CONFIG_COVERING_INDEX_SCAN -**
This option takes a single integer argument which is interpreted as +**
^This option takes a single integer argument which is interpreted as ** a boolean in order to enable or disable the use of covering indices for -** full table scans in the query optimizer. The default setting is determined +** full table scans in the query optimizer. ^The default setting is determined ** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on" ** if that compile-time option is omitted. ** The ability to disable the use of covering indices for full table scans ** is because some incorrectly coded legacy applications might malfunction -** malfunction when the optimization is enabled. Providing the ability to +** when the optimization is enabled. Providing the ability to ** disable the optimization allows the older, buggy application code to work ** without change even with newer versions of SQLite. ** @@ -2213,17 +1816,24 @@ struct sqlite3_mem_methods { ** ** [[SQLITE_CONFIG_MMAP_SIZE]] **
SQLITE_CONFIG_MMAP_SIZE -**
SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values +**
^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values ** that are the default mmap size limit (the default setting for ** [PRAGMA mmap_size]) and the maximum allowed mmap size limit. -** The default setting can be overridden by each database connection using +** ^The default setting can be overridden by each database connection using ** either the [PRAGMA mmap_size] command, or by using the -** [SQLITE_FCNTL_MMAP_SIZE] file control. The maximum allowed mmap size +** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size ** cannot be changed at run-time. Nor may the maximum allowed mmap size ** exceed the compile-time maximum mmap size set by the -** [SQLITE_MAX_MMAP_SIZE] compile-time option. -** If either argument to this option is negative, then that argument is +** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^ +** ^If either argument to this option is negative, then that argument is ** changed to its compile-time default. +** +** [[SQLITE_CONFIG_WIN32_HEAPSIZE]] +**
SQLITE_CONFIG_WIN32_HEAPSIZE +**
^This option is only available if SQLite is compiled for Windows +** with the [SQLITE_WIN32_MALLOC] pre-processor macro defined. +** SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value +** that specifies the maximum size of the created heap. ** */ #define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ @@ -2248,6 +1858,7 @@ struct sqlite3_mem_methods { #define SQLITE_CONFIG_COVERING_INDEX_SCAN 20 /* int */ #define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */ #define SQLITE_CONFIG_MMAP_SIZE 22 /* sqlite3_int64, sqlite3_int64 */ +#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */ /* ** CAPI3REF: Database Connection Configuration Options @@ -2324,19 +1935,21 @@ SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff); /* ** CAPI3REF: Last Insert Rowid ** -** ^Each entry in an SQLite table has a unique 64-bit signed +** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables) +** has a unique 64-bit signed ** integer key called the [ROWID | "rowid"]. ^The rowid is always available ** as an undeclared column named ROWID, OID, or _ROWID_ as long as those ** names are not also used by explicitly declared columns. ^If ** the table has a column of type [INTEGER PRIMARY KEY] then that column ** is another alias for the rowid. ** -** ^This routine returns the [rowid] of the most recent -** successful [INSERT] into the database from the [database connection] -** in the first argument. ^As of SQLite version 3.7.7, this routines -** records the last insert rowid of both ordinary tables and [virtual tables]. -** ^If no successful [INSERT]s -** have ever occurred on that database connection, zero is returned. +** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the +** most recent successful [INSERT] into a rowid table or [virtual table] +** on database connection D. +** ^Inserts into [WITHOUT ROWID] tables are not recorded. +** ^If no successful [INSERT]s into rowid tables +** have ever occurred on the database connection D, +** then sqlite3_last_insert_rowid(D) returns zero. ** ** ^(If an [INSERT] occurs within a trigger or within a [virtual table] ** method, then this routine will return the [rowid] of the inserted @@ -2902,11 +2515,13 @@ SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag); ** applications to access the same PRNG for other purposes. ** ** ^A call to this routine stores N bytes of randomness into buffer P. +** ^If N is less than one, then P can be a NULL pointer. ** -** ^The first time this routine is invoked (either internally or by -** the application) the PRNG is seeded using randomness obtained -** from the xRandomness method of the default [sqlite3_vfs] object. -** ^On all subsequent invocations, the pseudo-randomness is generated +** ^If this routine has not been previously called or if the previous +** call had N less than one, then the PRNG is seeded using randomness +** obtained from the xRandomness method of the default [sqlite3_vfs] object. +** ^If the previous call to this routine had an N of 1 or more then +** the pseudo-randomness is generated ** internally and without recourse to the [sqlite3_vfs] xRandomness ** method. */ @@ -3066,6 +2681,7 @@ SQLITE_API int sqlite3_set_authorizer( #define SQLITE_FUNCTION 31 /* NULL Function Name */ #define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */ #define SQLITE_COPY 0 /* No longer used */ +#define SQLITE_RECURSIVE 33 /* NULL NULL */ /* ** CAPI3REF: Tracing And Profiling Functions @@ -3646,7 +3262,6 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** choice of query plan if the parameter is the left-hand side of a [LIKE] ** or [GLOB] operator or if the parameter is compared to an indexed column ** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled. -** the ** ** */ @@ -4308,19 +3923,19 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** ** NULL INTEGER Result is 0 ** NULL FLOAT Result is 0.0 -** NULL TEXT Result is NULL pointer -** NULL BLOB Result is NULL pointer +** NULL TEXT Result is a NULL pointer +** NULL BLOB Result is a NULL pointer ** INTEGER FLOAT Convert from integer to float ** INTEGER TEXT ASCII rendering of the integer ** INTEGER BLOB Same as INTEGER->TEXT -** FLOAT INTEGER Convert from float to integer +** FLOAT INTEGER [CAST] to INTEGER ** FLOAT TEXT ASCII rendering of the float -** FLOAT BLOB Same as FLOAT->TEXT -** TEXT INTEGER Use atoi() -** TEXT FLOAT Use atof() +** FLOAT BLOB [CAST] to BLOB +** TEXT INTEGER [CAST] to INTEGER +** TEXT FLOAT [CAST] to REAL ** TEXT BLOB No change -** BLOB INTEGER Convert to TEXT then use atoi() -** BLOB FLOAT Convert to TEXT then use atof() +** BLOB INTEGER [CAST] to INTEGER +** BLOB FLOAT [CAST] to REAL ** BLOB TEXT Add a zero terminator if needed ** ** )^ @@ -4376,7 +3991,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** described above, or until [sqlite3_step()] or [sqlite3_reset()] or ** [sqlite3_finalize()] is called. ^The memory space used to hold strings ** and BLOBs is freed automatically. Do not pass the pointers returned -** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into +** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into ** [sqlite3_free()]. ** ** ^(If a memory allocation error occurs during the evaluation of any @@ -4485,15 +4100,24 @@ SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt); ** ** ^The fourth parameter, eTextRep, specifies what ** [SQLITE_UTF8 | text encoding] this SQL function prefers for -** its parameters. Every SQL function implementation must be able to work -** with UTF-8, UTF-16le, or UTF-16be. But some implementations may be -** more efficient with one encoding than another. ^An application may -** invoke sqlite3_create_function() or sqlite3_create_function16() multiple -** times with the same function but with different values of eTextRep. +** its parameters. The application should set this parameter to +** [SQLITE_UTF16LE] if the function implementation invokes +** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the +** implementation invokes [sqlite3_value_text16be()] on an input, or +** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8] +** otherwise. ^The same SQL function may be registered multiple times using +** different preferred text encodings, with different implementations for +** each encoding. ** ^When multiple implementations of the same function are available, SQLite ** will pick the one that involves the least amount of data conversion. -** If there is only a single implementation which does not care what text -** encoding is used, then the fourth argument should be [SQLITE_ANY]. +** +** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC] +** to signal that the function will always return the same result given +** the same inputs within a single SQL statement. Most SQL functions are +** deterministic. The built-in [random()] SQL function is an example of a +** function that is not deterministic. The SQLite query planner is able to +** perform additional optimizations on deterministic functions, so use +** of the [SQLITE_DETERMINISTIC] flag is recommended where possible. ** ** ^(The fifth parameter is an arbitrary pointer. The implementation of the ** function can gain access to this pointer using [sqlite3_user_data()].)^ @@ -4579,9 +4203,19 @@ SQLITE_API int sqlite3_create_function_v2( #define SQLITE_UTF16LE 2 #define SQLITE_UTF16BE 3 #define SQLITE_UTF16 4 /* Use native byte order */ -#define SQLITE_ANY 5 /* sqlite3_create_function only */ +#define SQLITE_ANY 5 /* Deprecated */ #define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */ +/* +** CAPI3REF: Function Flags +** +** These constants may be ORed together with the +** [SQLITE_UTF8 | preferred text encoding] as the fourth argument +** to [sqlite3_create_function()], [sqlite3_create_function16()], or +** [sqlite3_create_function_v2()]. +*/ +#define SQLITE_DETERMINISTIC 0x800 + /* ** CAPI3REF: Deprecated Functions ** DEPRECATED @@ -5353,12 +4987,13 @@ SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); ** ** ^The sqlite3_update_hook() interface registers a callback function ** with the [database connection] identified by the first argument -** to be invoked whenever a row is updated, inserted or deleted. +** to be invoked whenever a row is updated, inserted or deleted in +** a rowid table. ** ^Any callback set by a previous call to this function ** for the same database connection is overridden. ** ** ^The second argument is a pointer to the function to invoke when a -** row is updated, inserted or deleted. +** row is updated, inserted or deleted in a rowid table. ** ^The first argument to the callback is a copy of the third argument ** to sqlite3_update_hook(). ** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE], @@ -5371,6 +5006,7 @@ SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*); ** ** ^(The update hook is not invoked when internal system tables are ** modified (i.e. sqlite_master and sqlite_sequence).)^ +** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified. ** ** ^In the current implementation, the update hook ** is not invoked when duplication rows are deleted because of an @@ -5452,8 +5088,8 @@ SQLITE_API int sqlite3_release_memory(int); ** ** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap ** memory as possible from database connection D. Unlike the -** [sqlite3_release_memory()] interface, this interface is effect even -** when then [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is +** [sqlite3_release_memory()] interface, this interface is in effect even +** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is ** omitted. ** ** See also: [sqlite3_release_memory()] @@ -5828,10 +5464,22 @@ struct sqlite3_module { ** the correct order to satisfy the ORDER BY clause so that no separate ** sorting step is required. ** -** ^The estimatedCost value is an estimate of the cost of doing the -** particular lookup. A full scan of a table with N entries should have -** a cost of N. A binary search of a table of N entries should have a -** cost of approximately log(N). +** ^The estimatedCost value is an estimate of the cost of a particular +** strategy. A cost of N indicates that the cost of the strategy is similar +** to a linear scan of an SQLite table with N rows. A cost of log(N) +** indicates that the expense of the operation is similar to that of a +** binary search on a unique indexed field of an SQLite table with N rows. +** +** ^The estimatedRows value is an estimate of the number of rows that +** will be returned by the strategy. +** +** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info +** structure for SQLite version 3.8.2. If a virtual table extension is +** used with an SQLite version earlier than 3.8.2, the results of attempting +** to read or write the estimatedRows field are undefined (but are likely +** to included crashing the application). The estimatedRows field should +** therefore only be used if [sqlite3_libversion_number()] returns a +** value greater than or equal to 3008002. */ struct sqlite3_index_info { /* Inputs */ @@ -5856,7 +5504,9 @@ struct sqlite3_index_info { char *idxStr; /* String, possibly obtained from sqlite3_malloc */ int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */ int orderByConsumed; /* True if output is already ordered */ - double estimatedCost; /* Estimated cost of using this index */ + double estimatedCost; /* Estimated cost of using this index */ + /* Fields below are only available in SQLite 3.8.2 and later */ + sqlite3_int64 estimatedRows; /* Estimated number of rows returned */ }; /* @@ -6060,6 +5710,9 @@ typedef struct sqlite3_blob sqlite3_blob; ** interface. Use the [UPDATE] SQL command to change the size of a ** blob. ** +** ^The [sqlite3_blob_open()] interface will fail for a [WITHOUT ROWID] +** table. Incremental BLOB I/O is not possible on [WITHOUT ROWID] tables. +** ** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces ** and the built-in [zeroblob] SQL function can be used, if desired, ** to create an empty, zero-filled blob in which to read or write using @@ -6583,7 +6236,9 @@ SQLITE_API int sqlite3_test_control(int op, ...); #define SQLITE_TESTCTRL_SCRATCHMALLOC 17 #define SQLITE_TESTCTRL_LOCALTIME_FAULT 18 #define SQLITE_TESTCTRL_EXPLAIN_STMT 19 -#define SQLITE_TESTCTRL_LAST 19 +#define SQLITE_TESTCTRL_NEVER_CORRUPT 20 +#define SQLITE_TESTCTRL_VDBE_COVERAGE 21 +#define SQLITE_TESTCTRL_LAST 21 /* ** CAPI3REF: SQLite Runtime Status @@ -7847,6 +7502,489 @@ struct sqlite3_rtree_geometry { /************** End of sqlite3.h *********************************************/ /************** Continuing where we left off in sqliteInt.h ******************/ + +/* +** Include the configuration header output by 'configure' if we're using the +** autoconf-based build +*/ +#ifdef _HAVE_SQLITE_CONFIG_H +#include "config.h" +#endif + +/************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/ +/************** Begin file sqliteLimit.h *************************************/ +/* +** 2007 May 7 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file defines various limits of what SQLite can process. +*/ + +/* +** The maximum length of a TEXT or BLOB in bytes. This also +** limits the size of a row in a table or index. +** +** The hard limit is the ability of a 32-bit signed integer +** to count the size: 2^31-1 or 2147483647. +*/ +#ifndef SQLITE_MAX_LENGTH +# define SQLITE_MAX_LENGTH 1000000000 +#endif + +/* +** This is the maximum number of +** +** * Columns in a table +** * Columns in an index +** * Columns in a view +** * Terms in the SET clause of an UPDATE statement +** * Terms in the result set of a SELECT statement +** * Terms in the GROUP BY or ORDER BY clauses of a SELECT statement. +** * Terms in the VALUES clause of an INSERT statement +** +** The hard upper limit here is 32676. Most database people will +** tell you that in a well-normalized database, you usually should +** not have more than a dozen or so columns in any table. And if +** that is the case, there is no point in having more than a few +** dozen values in any of the other situations described above. +*/ +#ifndef SQLITE_MAX_COLUMN +# define SQLITE_MAX_COLUMN 2000 +#endif + +/* +** The maximum length of a single SQL statement in bytes. +** +** It used to be the case that setting this value to zero would +** turn the limit off. That is no longer true. It is not possible +** to turn this limit off. +*/ +#ifndef SQLITE_MAX_SQL_LENGTH +# define SQLITE_MAX_SQL_LENGTH 1000000000 +#endif + +/* +** The maximum depth of an expression tree. This is limited to +** some extent by SQLITE_MAX_SQL_LENGTH. But sometime you might +** want to place more severe limits on the complexity of an +** expression. +** +** A value of 0 used to mean that the limit was not enforced. +** But that is no longer true. The limit is now strictly enforced +** at all times. +*/ +#ifndef SQLITE_MAX_EXPR_DEPTH +# define SQLITE_MAX_EXPR_DEPTH 1000 +#endif + +/* +** The maximum number of terms in a compound SELECT statement. +** The code generator for compound SELECT statements does one +** level of recursion for each term. A stack overflow can result +** if the number of terms is too large. In practice, most SQL +** never has more than 3 or 4 terms. Use a value of 0 to disable +** any limit on the number of terms in a compount SELECT. +*/ +#ifndef SQLITE_MAX_COMPOUND_SELECT +# define SQLITE_MAX_COMPOUND_SELECT 500 +#endif + +/* +** The maximum number of opcodes in a VDBE program. +** Not currently enforced. +*/ +#ifndef SQLITE_MAX_VDBE_OP +# define SQLITE_MAX_VDBE_OP 25000 +#endif + +/* +** The maximum number of arguments to an SQL function. +*/ +#ifndef SQLITE_MAX_FUNCTION_ARG +# define SQLITE_MAX_FUNCTION_ARG 127 +#endif + +/* +** The maximum number of in-memory pages to use for the main database +** table and for temporary tables. The SQLITE_DEFAULT_CACHE_SIZE +*/ +#ifndef SQLITE_DEFAULT_CACHE_SIZE +# define SQLITE_DEFAULT_CACHE_SIZE 2000 +#endif +#ifndef SQLITE_DEFAULT_TEMP_CACHE_SIZE +# define SQLITE_DEFAULT_TEMP_CACHE_SIZE 500 +#endif + +/* +** The default number of frames to accumulate in the log file before +** checkpointing the database in WAL mode. +*/ +#ifndef SQLITE_DEFAULT_WAL_AUTOCHECKPOINT +# define SQLITE_DEFAULT_WAL_AUTOCHECKPOINT 1000 +#endif + +/* +** The maximum number of attached databases. This must be between 0 +** and 62. The upper bound on 62 is because a 64-bit integer bitmap +** is used internally to track attached databases. +*/ +#ifndef SQLITE_MAX_ATTACHED +# define SQLITE_MAX_ATTACHED 10 +#endif + + +/* +** The maximum value of a ?nnn wildcard that the parser will accept. +*/ +#ifndef SQLITE_MAX_VARIABLE_NUMBER +# define SQLITE_MAX_VARIABLE_NUMBER 999 +#endif + +/* Maximum page size. The upper bound on this value is 65536. This a limit +** imposed by the use of 16-bit offsets within each page. +** +** Earlier versions of SQLite allowed the user to change this value at +** compile time. This is no longer permitted, on the grounds that it creates +** a library that is technically incompatible with an SQLite library +** compiled with a different limit. If a process operating on a database +** with a page-size of 65536 bytes crashes, then an instance of SQLite +** compiled with the default page-size limit will not be able to rollback +** the aborted transaction. This could lead to database corruption. +*/ +#ifdef SQLITE_MAX_PAGE_SIZE +# undef SQLITE_MAX_PAGE_SIZE +#endif +#define SQLITE_MAX_PAGE_SIZE 65536 + + +/* +** The default size of a database page. +*/ +#ifndef SQLITE_DEFAULT_PAGE_SIZE +# define SQLITE_DEFAULT_PAGE_SIZE 1024 +#endif +#if SQLITE_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE +# undef SQLITE_DEFAULT_PAGE_SIZE +# define SQLITE_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE +#endif + +/* +** Ordinarily, if no value is explicitly provided, SQLite creates databases +** with page size SQLITE_DEFAULT_PAGE_SIZE. However, based on certain +** device characteristics (sector-size and atomic write() support), +** SQLite may choose a larger value. This constant is the maximum value +** SQLite will choose on its own. +*/ +#ifndef SQLITE_MAX_DEFAULT_PAGE_SIZE +# define SQLITE_MAX_DEFAULT_PAGE_SIZE 8192 +#endif +#if SQLITE_MAX_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE +# undef SQLITE_MAX_DEFAULT_PAGE_SIZE +# define SQLITE_MAX_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE +#endif + + +/* +** Maximum number of pages in one database file. +** +** This is really just the default value for the max_page_count pragma. +** This value can be lowered (or raised) at run-time using that the +** max_page_count macro. +*/ +#ifndef SQLITE_MAX_PAGE_COUNT +# define SQLITE_MAX_PAGE_COUNT 1073741823 +#endif + +/* +** Maximum length (in bytes) of the pattern in a LIKE or GLOB +** operator. +*/ +#ifndef SQLITE_MAX_LIKE_PATTERN_LENGTH +# define SQLITE_MAX_LIKE_PATTERN_LENGTH 50000 +#endif + +/* +** Maximum depth of recursion for triggers. +** +** A value of 1 means that a trigger program will not be able to itself +** fire any triggers. A value of 0 means that no trigger programs at all +** may be executed. +*/ +#ifndef SQLITE_MAX_TRIGGER_DEPTH +# define SQLITE_MAX_TRIGGER_DEPTH 1000 +#endif + +/************** End of sqliteLimit.h *****************************************/ +/************** Continuing where we left off in sqliteInt.h ******************/ + +/* Disable nuisance warnings on Borland compilers */ +#if defined(__BORLANDC__) +#pragma warn -rch /* unreachable code */ +#pragma warn -ccc /* Condition is always true or false */ +#pragma warn -aus /* Assigned value is never used */ +#pragma warn -csu /* Comparing signed and unsigned */ +#pragma warn -spa /* Suspicious pointer arithmetic */ +#endif + +/* Needed for various definitions... */ +#ifndef _GNU_SOURCE +# define _GNU_SOURCE +#endif + +#if defined(__OpenBSD__) && !defined(_BSD_SOURCE) +# define _BSD_SOURCE +#endif + +/* +** Include standard header files as necessary +*/ +#ifdef HAVE_STDINT_H +#include +#endif +#ifdef HAVE_INTTYPES_H +#include +#endif + +/* +** The following macros are used to cast pointers to integers and +** integers to pointers. The way you do this varies from one compiler +** to the next, so we have developed the following set of #if statements +** to generate appropriate macros for a wide range of compilers. +** +** The correct "ANSI" way to do this is to use the intptr_t type. +** Unfortunately, that typedef is not available on all compilers, or +** if it is available, it requires an #include of specific headers +** that vary from one machine to the next. +** +** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on +** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)). +** So we have to define the macros in different ways depending on the +** compiler. +*/ +#if defined(__PTRDIFF_TYPE__) /* This case should work for GCC */ +# define SQLITE_INT_TO_PTR(X) ((void*)(__PTRDIFF_TYPE__)(X)) +# define SQLITE_PTR_TO_INT(X) ((int)(__PTRDIFF_TYPE__)(X)) +#elif !defined(__GNUC__) /* Works for compilers other than LLVM */ +# define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X]) +# define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0)) +#elif defined(HAVE_STDINT_H) /* Use this case if we have ANSI headers */ +# define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X)) +# define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X)) +#else /* Generates a warning - but it always works */ +# define SQLITE_INT_TO_PTR(X) ((void*)(X)) +# define SQLITE_PTR_TO_INT(X) ((int)(X)) +#endif + +/* +** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2. +** 0 means mutexes are permanently disable and the library is never +** threadsafe. 1 means the library is serialized which is the highest +** level of threadsafety. 2 means the library is multithreaded - multiple +** threads can use SQLite as long as no two threads try to use the same +** database connection at the same time. +** +** Older versions of SQLite used an optional THREADSAFE macro. +** We support that for legacy. +*/ +#if !defined(SQLITE_THREADSAFE) +# if defined(THREADSAFE) +# define SQLITE_THREADSAFE THREADSAFE +# else +# define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */ +# endif +#endif + +/* +** Powersafe overwrite is on by default. But can be turned off using +** the -DSQLITE_POWERSAFE_OVERWRITE=0 command-line option. +*/ +#ifndef SQLITE_POWERSAFE_OVERWRITE +# define SQLITE_POWERSAFE_OVERWRITE 1 +#endif + +/* +** The SQLITE_DEFAULT_MEMSTATUS macro must be defined as either 0 or 1. +** It determines whether or not the features related to +** SQLITE_CONFIG_MEMSTATUS are available by default or not. This value can +** be overridden at runtime using the sqlite3_config() API. +*/ +#if !defined(SQLITE_DEFAULT_MEMSTATUS) +# define SQLITE_DEFAULT_MEMSTATUS 1 +#endif + +/* +** Exactly one of the following macros must be defined in order to +** specify which memory allocation subsystem to use. +** +** SQLITE_SYSTEM_MALLOC // Use normal system malloc() +** SQLITE_WIN32_MALLOC // Use Win32 native heap API +** SQLITE_ZERO_MALLOC // Use a stub allocator that always fails +** SQLITE_MEMDEBUG // Debugging version of system malloc() +** +** On Windows, if the SQLITE_WIN32_MALLOC_VALIDATE macro is defined and the +** assert() macro is enabled, each call into the Win32 native heap subsystem +** will cause HeapValidate to be called. If heap validation should fail, an +** assertion will be triggered. +** +** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as +** the default. +*/ +#if defined(SQLITE_SYSTEM_MALLOC) \ + + defined(SQLITE_WIN32_MALLOC) \ + + defined(SQLITE_ZERO_MALLOC) \ + + defined(SQLITE_MEMDEBUG)>1 +# error "Two or more of the following compile-time configuration options\ + are defined but at most one is allowed:\ + SQLITE_SYSTEM_MALLOC, SQLITE_WIN32_MALLOC, SQLITE_MEMDEBUG,\ + SQLITE_ZERO_MALLOC" +#endif +#if defined(SQLITE_SYSTEM_MALLOC) \ + + defined(SQLITE_WIN32_MALLOC) \ + + defined(SQLITE_ZERO_MALLOC) \ + + defined(SQLITE_MEMDEBUG)==0 +# define SQLITE_SYSTEM_MALLOC 1 +#endif + +/* +** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the +** sizes of memory allocations below this value where possible. +*/ +#if !defined(SQLITE_MALLOC_SOFT_LIMIT) +# define SQLITE_MALLOC_SOFT_LIMIT 1024 +#endif + +/* +** We need to define _XOPEN_SOURCE as follows in order to enable +** recursive mutexes on most Unix systems and fchmod() on OpenBSD. +** But _XOPEN_SOURCE define causes problems for Mac OS X, so omit +** it. +*/ +#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__) +# define _XOPEN_SOURCE 600 +#endif + +/* +** NDEBUG and SQLITE_DEBUG are opposites. It should always be true that +** defined(NDEBUG)==!defined(SQLITE_DEBUG). If this is not currently true, +** make it true by defining or undefining NDEBUG. +** +** Setting NDEBUG makes the code smaller and faster by disabling the +** assert() statements in the code. So we want the default action +** to be for NDEBUG to be set and NDEBUG to be undefined only if SQLITE_DEBUG +** is set. Thus NDEBUG becomes an opt-in rather than an opt-out +** feature. +*/ +#if !defined(NDEBUG) && !defined(SQLITE_DEBUG) +# define NDEBUG 1 +#endif +#if defined(NDEBUG) && defined(SQLITE_DEBUG) +# undef NDEBUG +#endif + +/* +** Enable SQLITE_ENABLE_EXPLAIN_COMMENTS if SQLITE_DEBUG is turned on. +*/ +#if !defined(SQLITE_ENABLE_EXPLAIN_COMMENTS) && defined(SQLITE_DEBUG) +# define SQLITE_ENABLE_EXPLAIN_COMMENTS 1 +#endif + +/* +** The testcase() macro is used to aid in coverage testing. When +** doing coverage testing, the condition inside the argument to +** testcase() must be evaluated both true and false in order to +** get full branch coverage. The testcase() macro is inserted +** to help ensure adequate test coverage in places where simple +** condition/decision coverage is inadequate. For example, testcase() +** can be used to make sure boundary values are tested. For +** bitmask tests, testcase() can be used to make sure each bit +** is significant and used at least once. On switch statements +** where multiple cases go to the same block of code, testcase() +** can insure that all cases are evaluated. +** +*/ +#ifdef SQLITE_COVERAGE_TEST +SQLITE_PRIVATE void sqlite3Coverage(int); +# define testcase(X) if( X ){ sqlite3Coverage(__LINE__); } +#else +# define testcase(X) +#endif + +/* +** The TESTONLY macro is used to enclose variable declarations or +** other bits of code that are needed to support the arguments +** within testcase() and assert() macros. +*/ +#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST) +# define TESTONLY(X) X +#else +# define TESTONLY(X) +#endif + +/* +** Sometimes we need a small amount of code such as a variable initialization +** to setup for a later assert() statement. We do not want this code to +** appear when assert() is disabled. The following macro is therefore +** used to contain that setup code. The "VVA" acronym stands for +** "Verification, Validation, and Accreditation". In other words, the +** code within VVA_ONLY() will only run during verification processes. +*/ +#ifndef NDEBUG +# define VVA_ONLY(X) X +#else +# define VVA_ONLY(X) +#endif + +/* +** The ALWAYS and NEVER macros surround boolean expressions which +** are intended to always be true or false, respectively. Such +** expressions could be omitted from the code completely. But they +** are included in a few cases in order to enhance the resilience +** of SQLite to unexpected behavior - to make the code "self-healing" +** or "ductile" rather than being "brittle" and crashing at the first +** hint of unplanned behavior. +** +** In other words, ALWAYS and NEVER are added for defensive code. +** +** When doing coverage testing ALWAYS and NEVER are hard-coded to +** be true and false so that the unreachable code they specify will +** not be counted as untested code. +*/ +#if defined(SQLITE_COVERAGE_TEST) +# define ALWAYS(X) (1) +# define NEVER(X) (0) +#elif !defined(NDEBUG) +# define ALWAYS(X) ((X)?1:(assert(0),0)) +# define NEVER(X) ((X)?(assert(0),1):0) +#else +# define ALWAYS(X) (X) +# define NEVER(X) (X) +#endif + +/* +** Return true (non-zero) if the input is a integer that is too large +** to fit in 32-bits. This macro is used inside of various testcase() +** macros to verify that we have tested SQLite for large-file support. +*/ +#define IS_BIG_INT(X) (((X)&~(i64)0xffffffff)!=0) + +/* +** The macro unlikely() is a hint that surrounds a boolean +** expression that is usually false. Macro likely() surrounds +** a boolean expression that is usually true. These hints could, +** in theory, be used by the compiler to generate better code, but +** currently they are just comments for human readers. +*/ +#define likely(X) (X) +#define unlikely(X) (X) + /************** Include hash.h in the middle of sqliteInt.h ******************/ /************** Begin file hash.h ********************************************/ /* @@ -7950,163 +8088,165 @@ SQLITE_PRIVATE void sqlite3HashClear(Hash*); /************** Continuing where we left off in sqliteInt.h ******************/ /************** Include parse.h in the middle of sqliteInt.h *****************/ /************** Begin file parse.h *******************************************/ -#define TK_SEMI 1 -#define TK_EXPLAIN 2 -#define TK_QUERY 3 -#define TK_PLAN 4 -#define TK_BEGIN 5 -#define TK_TRANSACTION 6 -#define TK_DEFERRED 7 -#define TK_IMMEDIATE 8 -#define TK_EXCLUSIVE 9 -#define TK_COMMIT 10 -#define TK_END 11 -#define TK_ROLLBACK 12 -#define TK_SAVEPOINT 13 -#define TK_RELEASE 14 -#define TK_TO 15 -#define TK_TABLE 16 -#define TK_CREATE 17 -#define TK_IF 18 -#define TK_NOT 19 -#define TK_EXISTS 20 -#define TK_TEMP 21 -#define TK_LP 22 -#define TK_RP 23 -#define TK_AS 24 -#define TK_COMMA 25 -#define TK_ID 26 -#define TK_INDEXED 27 -#define TK_ABORT 28 -#define TK_ACTION 29 -#define TK_AFTER 30 -#define TK_ANALYZE 31 -#define TK_ASC 32 -#define TK_ATTACH 33 -#define TK_BEFORE 34 -#define TK_BY 35 -#define TK_CASCADE 36 -#define TK_CAST 37 -#define TK_COLUMNKW 38 -#define TK_CONFLICT 39 -#define TK_DATABASE 40 -#define TK_DESC 41 -#define TK_DETACH 42 -#define TK_EACH 43 -#define TK_FAIL 44 -#define TK_FOR 45 -#define TK_IGNORE 46 -#define TK_INITIALLY 47 -#define TK_INSTEAD 48 -#define TK_LIKE_KW 49 -#define TK_MATCH 50 -#define TK_NO 51 -#define TK_KEY 52 -#define TK_OF 53 -#define TK_OFFSET 54 -#define TK_PRAGMA 55 -#define TK_RAISE 56 -#define TK_REPLACE 57 -#define TK_RESTRICT 58 -#define TK_ROW 59 -#define TK_TRIGGER 60 -#define TK_VACUUM 61 -#define TK_VIEW 62 -#define TK_VIRTUAL 63 -#define TK_REINDEX 64 -#define TK_RENAME 65 -#define TK_CTIME_KW 66 -#define TK_ANY 67 -#define TK_OR 68 -#define TK_AND 69 -#define TK_IS 70 -#define TK_BETWEEN 71 -#define TK_IN 72 -#define TK_ISNULL 73 -#define TK_NOTNULL 74 -#define TK_NE 75 -#define TK_EQ 76 -#define TK_GT 77 -#define TK_LE 78 -#define TK_LT 79 -#define TK_GE 80 -#define TK_ESCAPE 81 -#define TK_BITAND 82 -#define TK_BITOR 83 -#define TK_LSHIFT 84 -#define TK_RSHIFT 85 -#define TK_PLUS 86 -#define TK_MINUS 87 -#define TK_STAR 88 -#define TK_SLASH 89 -#define TK_REM 90 -#define TK_CONCAT 91 -#define TK_COLLATE 92 -#define TK_BITNOT 93 -#define TK_STRING 94 -#define TK_JOIN_KW 95 -#define TK_CONSTRAINT 96 -#define TK_DEFAULT 97 -#define TK_NULL 98 -#define TK_PRIMARY 99 -#define TK_UNIQUE 100 -#define TK_CHECK 101 -#define TK_REFERENCES 102 -#define TK_AUTOINCR 103 -#define TK_ON 104 -#define TK_INSERT 105 -#define TK_DELETE 106 -#define TK_UPDATE 107 -#define TK_SET 108 -#define TK_DEFERRABLE 109 -#define TK_FOREIGN 110 -#define TK_DROP 111 -#define TK_UNION 112 -#define TK_ALL 113 -#define TK_EXCEPT 114 -#define TK_INTERSECT 115 -#define TK_SELECT 116 -#define TK_DISTINCT 117 -#define TK_DOT 118 -#define TK_FROM 119 -#define TK_JOIN 120 -#define TK_USING 121 -#define TK_ORDER 122 -#define TK_GROUP 123 -#define TK_HAVING 124 -#define TK_LIMIT 125 -#define TK_WHERE 126 -#define TK_INTO 127 -#define TK_VALUES 128 -#define TK_INTEGER 129 -#define TK_FLOAT 130 -#define TK_BLOB 131 -#define TK_REGISTER 132 -#define TK_VARIABLE 133 -#define TK_CASE 134 -#define TK_WHEN 135 -#define TK_THEN 136 -#define TK_ELSE 137 -#define TK_INDEX 138 -#define TK_ALTER 139 -#define TK_ADD 140 -#define TK_TO_TEXT 141 -#define TK_TO_BLOB 142 -#define TK_TO_NUMERIC 143 -#define TK_TO_INT 144 -#define TK_TO_REAL 145 -#define TK_ISNOT 146 -#define TK_END_OF_FILE 147 -#define TK_ILLEGAL 148 -#define TK_SPACE 149 -#define TK_UNCLOSED_STRING 150 -#define TK_FUNCTION 151 -#define TK_COLUMN 152 -#define TK_AGG_FUNCTION 153 -#define TK_AGG_COLUMN 154 -#define TK_CONST_FUNC 155 -#define TK_UMINUS 156 -#define TK_UPLUS 157 +#define TK_SEMI 1 +#define TK_EXPLAIN 2 +#define TK_QUERY 3 +#define TK_PLAN 4 +#define TK_BEGIN 5 +#define TK_TRANSACTION 6 +#define TK_DEFERRED 7 +#define TK_IMMEDIATE 8 +#define TK_EXCLUSIVE 9 +#define TK_COMMIT 10 +#define TK_END 11 +#define TK_ROLLBACK 12 +#define TK_SAVEPOINT 13 +#define TK_RELEASE 14 +#define TK_TO 15 +#define TK_TABLE 16 +#define TK_CREATE 17 +#define TK_IF 18 +#define TK_NOT 19 +#define TK_EXISTS 20 +#define TK_TEMP 21 +#define TK_LP 22 +#define TK_RP 23 +#define TK_AS 24 +#define TK_WITHOUT 25 +#define TK_COMMA 26 +#define TK_ID 27 +#define TK_INDEXED 28 +#define TK_ABORT 29 +#define TK_ACTION 30 +#define TK_AFTER 31 +#define TK_ANALYZE 32 +#define TK_ASC 33 +#define TK_ATTACH 34 +#define TK_BEFORE 35 +#define TK_BY 36 +#define TK_CASCADE 37 +#define TK_CAST 38 +#define TK_COLUMNKW 39 +#define TK_CONFLICT 40 +#define TK_DATABASE 41 +#define TK_DESC 42 +#define TK_DETACH 43 +#define TK_EACH 44 +#define TK_FAIL 45 +#define TK_FOR 46 +#define TK_IGNORE 47 +#define TK_INITIALLY 48 +#define TK_INSTEAD 49 +#define TK_LIKE_KW 50 +#define TK_MATCH 51 +#define TK_NO 52 +#define TK_KEY 53 +#define TK_OF 54 +#define TK_OFFSET 55 +#define TK_PRAGMA 56 +#define TK_RAISE 57 +#define TK_RECURSIVE 58 +#define TK_REPLACE 59 +#define TK_RESTRICT 60 +#define TK_ROW 61 +#define TK_TRIGGER 62 +#define TK_VACUUM 63 +#define TK_VIEW 64 +#define TK_VIRTUAL 65 +#define TK_WITH 66 +#define TK_REINDEX 67 +#define TK_RENAME 68 +#define TK_CTIME_KW 69 +#define TK_ANY 70 +#define TK_OR 71 +#define TK_AND 72 +#define TK_IS 73 +#define TK_BETWEEN 74 +#define TK_IN 75 +#define TK_ISNULL 76 +#define TK_NOTNULL 77 +#define TK_NE 78 +#define TK_EQ 79 +#define TK_GT 80 +#define TK_LE 81 +#define TK_LT 82 +#define TK_GE 83 +#define TK_ESCAPE 84 +#define TK_BITAND 85 +#define TK_BITOR 86 +#define TK_LSHIFT 87 +#define TK_RSHIFT 88 +#define TK_PLUS 89 +#define TK_MINUS 90 +#define TK_STAR 91 +#define TK_SLASH 92 +#define TK_REM 93 +#define TK_CONCAT 94 +#define TK_COLLATE 95 +#define TK_BITNOT 96 +#define TK_STRING 97 +#define TK_JOIN_KW 98 +#define TK_CONSTRAINT 99 +#define TK_DEFAULT 100 +#define TK_NULL 101 +#define TK_PRIMARY 102 +#define TK_UNIQUE 103 +#define TK_CHECK 104 +#define TK_REFERENCES 105 +#define TK_AUTOINCR 106 +#define TK_ON 107 +#define TK_INSERT 108 +#define TK_DELETE 109 +#define TK_UPDATE 110 +#define TK_SET 111 +#define TK_DEFERRABLE 112 +#define TK_FOREIGN 113 +#define TK_DROP 114 +#define TK_UNION 115 +#define TK_ALL 116 +#define TK_EXCEPT 117 +#define TK_INTERSECT 118 +#define TK_SELECT 119 +#define TK_VALUES 120 +#define TK_DISTINCT 121 +#define TK_DOT 122 +#define TK_FROM 123 +#define TK_JOIN 124 +#define TK_USING 125 +#define TK_ORDER 126 +#define TK_GROUP 127 +#define TK_HAVING 128 +#define TK_LIMIT 129 +#define TK_WHERE 130 +#define TK_INTO 131 +#define TK_INTEGER 132 +#define TK_FLOAT 133 +#define TK_BLOB 134 +#define TK_VARIABLE 135 +#define TK_CASE 136 +#define TK_WHEN 137 +#define TK_THEN 138 +#define TK_ELSE 139 +#define TK_INDEX 140 +#define TK_ALTER 141 +#define TK_ADD 142 +#define TK_TO_TEXT 143 +#define TK_TO_BLOB 144 +#define TK_TO_NUMERIC 145 +#define TK_TO_INT 146 +#define TK_TO_REAL 147 +#define TK_ISNOT 148 +#define TK_END_OF_FILE 149 +#define TK_ILLEGAL 150 +#define TK_SPACE 151 +#define TK_UNCLOSED_STRING 152 +#define TK_FUNCTION 153 +#define TK_COLUMN 154 +#define TK_AGG_FUNCTION 155 +#define TK_AGG_COLUMN 156 +#define TK_UMINUS 157 +#define TK_UPLUS 158 +#define TK_REGISTER 159 /************** End of parse.h ***********************************************/ /************** Continuing where we left off in sqliteInt.h ******************/ @@ -8272,6 +8412,31 @@ typedef INT8_TYPE i8; /* 1-byte signed integer */ typedef u32 tRowcnt; /* 32-bit is the default */ #endif +/* +** Estimated quantities used for query planning are stored as 16-bit +** logarithms. For quantity X, the value stored is 10*log2(X). This +** gives a possible range of values of approximately 1.0e986 to 1e-986. +** But the allowed values are "grainy". Not every value is representable. +** For example, quantities 16 and 17 are both represented by a LogEst +** of 40. However, since LogEst quantatites are suppose to be estimates, +** not exact values, this imprecision is not a problem. +** +** "LogEst" is short for "Logarithimic Estimate". +** +** Examples: +** 1 -> 0 20 -> 43 10000 -> 132 +** 2 -> 10 25 -> 46 25000 -> 146 +** 3 -> 16 100 -> 66 1000000 -> 199 +** 4 -> 20 1000 -> 99 1048576 -> 200 +** 10 -> 33 1024 -> 100 4294967296 -> 320 +** +** The LogEst can be negative to indicate fractional values. +** Examples: +** +** 0.5 -> -10 0.1 -> -33 0.0625 -> -40 +*/ +typedef INT16_TYPE LogEst; + /* ** Macros to determine whether the machine is big or little endian, ** evaluated at runtime. @@ -8370,6 +8535,20 @@ SQLITE_PRIVATE const int sqlite3one; # define SQLITE_DEFAULT_MMAP_SIZE SQLITE_MAX_MMAP_SIZE #endif +/* +** Only one of SQLITE_ENABLE_STAT3 or SQLITE_ENABLE_STAT4 can be defined. +** Priority is given to SQLITE_ENABLE_STAT4. If either are defined, also +** define SQLITE_ENABLE_STAT3_OR_STAT4 +*/ +#ifdef SQLITE_ENABLE_STAT4 +# undef SQLITE_ENABLE_STAT3 +# define SQLITE_ENABLE_STAT3_OR_STAT4 1 +#elif SQLITE_ENABLE_STAT3 +# define SQLITE_ENABLE_STAT3_OR_STAT4 1 +#elif SQLITE_ENABLE_STAT3_OR_STAT4 +# undef SQLITE_ENABLE_STAT3_OR_STAT4 +#endif + /* ** An instance of the following structure is used to store the busy-handler ** callback for a given sqlite handle. @@ -8498,6 +8677,7 @@ typedef struct LookasideSlot LookasideSlot; typedef struct Module Module; typedef struct NameContext NameContext; typedef struct Parse Parse; +typedef struct PrintfArguments PrintfArguments; typedef struct RowSet RowSet; typedef struct Savepoint Savepoint; typedef struct Select Select; @@ -8515,6 +8695,7 @@ typedef struct VTable VTable; typedef struct VtabCtx VtabCtx; typedef struct Walker Walker; typedef struct WhereInfo WhereInfo; +typedef struct With With; /* ** Defer sourcing vdbe.h and btree.h until after the "u8" and @@ -8589,7 +8770,7 @@ SQLITE_PRIVATE int sqlite3BtreeOpen( SQLITE_PRIVATE int sqlite3BtreeClose(Btree*); SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree*,int); SQLITE_PRIVATE int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64); -SQLITE_PRIVATE int sqlite3BtreeSetSafetyLevel(Btree*,int,int,int); +SQLITE_PRIVATE int sqlite3BtreeSetPagerFlags(Btree*,unsigned); SQLITE_PRIVATE int sqlite3BtreeSyncDisabled(Btree*); SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix); SQLITE_PRIVATE int sqlite3BtreeGetPageSize(Btree*); @@ -8703,12 +8884,10 @@ SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*); SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int *pRes); SQLITE_PRIVATE int sqlite3BtreeKeySize(BtCursor*, i64 *pSize); SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor*, u32 offset, u32 amt, void*); -SQLITE_PRIVATE const void *sqlite3BtreeKeyFetch(BtCursor*, int *pAmt); -SQLITE_PRIVATE const void *sqlite3BtreeDataFetch(BtCursor*, int *pAmt); +SQLITE_PRIVATE const void *sqlite3BtreeKeyFetch(BtCursor*, u32 *pAmt); +SQLITE_PRIVATE const void *sqlite3BtreeDataFetch(BtCursor*, u32 *pAmt); SQLITE_PRIVATE int sqlite3BtreeDataSize(BtCursor*, u32 *pSize); SQLITE_PRIVATE int sqlite3BtreeData(BtCursor*, u32 offset, u32 amt, void*); -SQLITE_PRIVATE void sqlite3BtreeSetCachedRowid(BtCursor*, sqlite3_int64); -SQLITE_PRIVATE sqlite3_int64 sqlite3BtreeGetCachedRowid(BtCursor*); SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*); SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*); @@ -8844,13 +9023,16 @@ struct VdbeOp { SubProgram *pProgram; /* Used when p4type is P4_SUBPROGRAM */ int (*xAdvance)(BtCursor *, int *); } p4; -#ifdef SQLITE_DEBUG +#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS char *zComment; /* Comment to improve readability */ #endif #ifdef VDBE_PROFILE - int cnt; /* Number of times this instruction was executed */ + u32 cnt; /* Number of times this instruction was executed */ u64 cycles; /* Total time spent executing this instruction */ #endif +#ifdef SQLITE_VDBE_COVERAGE + int iSrcLine; /* Source-code line that generated this opcode */ +#endif }; typedef struct VdbeOp VdbeOp; @@ -8900,15 +9082,11 @@ typedef struct VdbeOpList VdbeOpList; #define P4_SUBPROGRAM (-18) /* P4 is a pointer to a SubProgram structure */ #define P4_ADVANCE (-19) /* P4 is a pointer to BtreeNext() or BtreePrev() */ -/* When adding a P4 argument using P4_KEYINFO, a copy of the KeyInfo structure -** is made. That copy is freed when the Vdbe is finalized. But if the -** argument is P4_KEYINFO_HANDOFF, the passed in pointer is used. It still -** gets freed when the Vdbe is finalized so it still should be obtained -** from a single sqliteMalloc(). But no copy is made and the calling -** function should *not* try to free the KeyInfo. -*/ -#define P4_KEYINFO_HANDOFF (-16) -#define P4_KEYINFO_STATIC (-17) +/* Error message codes for OP_Halt */ +#define P5_ConstraintNotNull 1 +#define P5_ConstraintUnique 2 +#define P5_ConstraintCheck 3 +#define P5_ConstraintFK 4 /* ** The Vdbe.aColName array contains 5n Mem structures, where n is the @@ -8945,156 +9123,162 @@ typedef struct VdbeOpList VdbeOpList; /************** Begin file opcodes.h *****************************************/ /* Automatically generated. Do not edit */ /* See the mkopcodeh.awk script for details */ -#define OP_Function 1 -#define OP_Savepoint 2 -#define OP_AutoCommit 3 -#define OP_Transaction 4 -#define OP_SorterNext 5 -#define OP_Prev 6 -#define OP_Next 7 -#define OP_AggStep 8 -#define OP_Checkpoint 9 -#define OP_JournalMode 10 -#define OP_Vacuum 11 -#define OP_VFilter 12 -#define OP_VUpdate 13 -#define OP_Goto 14 -#define OP_Gosub 15 -#define OP_Return 16 -#define OP_Yield 17 -#define OP_HaltIfNull 18 -#define OP_Not 19 /* same as TK_NOT */ -#define OP_Halt 20 -#define OP_Integer 21 -#define OP_Int64 22 -#define OP_String 23 -#define OP_Null 24 -#define OP_Blob 25 -#define OP_Variable 26 -#define OP_Move 27 -#define OP_Copy 28 -#define OP_SCopy 29 -#define OP_ResultRow 30 -#define OP_CollSeq 31 -#define OP_AddImm 32 -#define OP_MustBeInt 33 -#define OP_RealAffinity 34 -#define OP_Permutation 35 -#define OP_Compare 36 -#define OP_Jump 37 -#define OP_Once 38 -#define OP_If 39 -#define OP_IfNot 40 -#define OP_Column 41 -#define OP_Affinity 42 -#define OP_MakeRecord 43 -#define OP_Count 44 -#define OP_ReadCookie 45 -#define OP_SetCookie 46 -#define OP_VerifyCookie 47 -#define OP_OpenRead 48 -#define OP_OpenWrite 49 -#define OP_OpenAutoindex 50 -#define OP_OpenEphemeral 51 -#define OP_SorterOpen 52 -#define OP_OpenPseudo 53 -#define OP_Close 54 -#define OP_SeekLt 55 -#define OP_SeekLe 56 -#define OP_SeekGe 57 -#define OP_SeekGt 58 -#define OP_Seek 59 -#define OP_NotFound 60 -#define OP_Found 61 -#define OP_IsUnique 62 -#define OP_NotExists 63 -#define OP_Sequence 64 -#define OP_NewRowid 65 -#define OP_Insert 66 -#define OP_InsertInt 67 -#define OP_Or 68 /* same as TK_OR */ -#define OP_And 69 /* same as TK_AND */ -#define OP_Delete 70 -#define OP_ResetCount 71 -#define OP_SorterCompare 72 -#define OP_IsNull 73 /* same as TK_ISNULL */ -#define OP_NotNull 74 /* same as TK_NOTNULL */ -#define OP_Ne 75 /* same as TK_NE */ -#define OP_Eq 76 /* same as TK_EQ */ -#define OP_Gt 77 /* same as TK_GT */ -#define OP_Le 78 /* same as TK_LE */ -#define OP_Lt 79 /* same as TK_LT */ -#define OP_Ge 80 /* same as TK_GE */ -#define OP_SorterData 81 -#define OP_BitAnd 82 /* same as TK_BITAND */ -#define OP_BitOr 83 /* same as TK_BITOR */ -#define OP_ShiftLeft 84 /* same as TK_LSHIFT */ -#define OP_ShiftRight 85 /* same as TK_RSHIFT */ -#define OP_Add 86 /* same as TK_PLUS */ -#define OP_Subtract 87 /* same as TK_MINUS */ -#define OP_Multiply 88 /* same as TK_STAR */ -#define OP_Divide 89 /* same as TK_SLASH */ -#define OP_Remainder 90 /* same as TK_REM */ -#define OP_Concat 91 /* same as TK_CONCAT */ -#define OP_RowKey 92 -#define OP_BitNot 93 /* same as TK_BITNOT */ -#define OP_String8 94 /* same as TK_STRING */ -#define OP_RowData 95 -#define OP_Rowid 96 -#define OP_NullRow 97 -#define OP_Last 98 -#define OP_SorterSort 99 -#define OP_Sort 100 -#define OP_Rewind 101 -#define OP_SorterInsert 102 -#define OP_IdxInsert 103 -#define OP_IdxDelete 104 -#define OP_IdxRowid 105 -#define OP_IdxLT 106 -#define OP_IdxGE 107 -#define OP_Destroy 108 -#define OP_Clear 109 -#define OP_CreateIndex 110 -#define OP_CreateTable 111 -#define OP_ParseSchema 112 -#define OP_LoadAnalysis 113 -#define OP_DropTable 114 -#define OP_DropIndex 115 -#define OP_DropTrigger 116 -#define OP_IntegrityCk 117 -#define OP_RowSetAdd 118 -#define OP_RowSetRead 119 -#define OP_RowSetTest 120 -#define OP_Program 121 -#define OP_Param 122 -#define OP_FkCounter 123 -#define OP_FkIfZero 124 -#define OP_MemMax 125 -#define OP_IfPos 126 -#define OP_IfNeg 127 -#define OP_IfZero 128 -#define OP_AggFinal 129 -#define OP_Real 130 /* same as TK_FLOAT */ -#define OP_IncrVacuum 131 -#define OP_Expire 132 -#define OP_TableLock 133 -#define OP_VBegin 134 -#define OP_VCreate 135 -#define OP_VDestroy 136 -#define OP_VOpen 137 -#define OP_VColumn 138 -#define OP_VNext 139 -#define OP_VRename 140 -#define OP_ToText 141 /* same as TK_TO_TEXT */ -#define OP_ToBlob 142 /* same as TK_TO_BLOB */ -#define OP_ToNumeric 143 /* same as TK_TO_NUMERIC*/ -#define OP_ToInt 144 /* same as TK_TO_INT */ -#define OP_ToReal 145 /* same as TK_TO_REAL */ -#define OP_Pagecount 146 -#define OP_MaxPgcnt 147 -#define OP_Trace 148 -#define OP_Noop 149 -#define OP_Explain 150 +#define OP_Function 1 /* synopsis: r[P3]=func(r[P2@P5]) */ +#define OP_Savepoint 2 +#define OP_AutoCommit 3 +#define OP_Transaction 4 +#define OP_SorterNext 5 +#define OP_PrevIfOpen 6 +#define OP_NextIfOpen 7 +#define OP_Prev 8 +#define OP_Next 9 +#define OP_AggStep 10 /* synopsis: accum=r[P3] step(r[P2@P5]) */ +#define OP_Checkpoint 11 +#define OP_JournalMode 12 +#define OP_Vacuum 13 +#define OP_VFilter 14 /* synopsis: iPlan=r[P3] zPlan='P4' */ +#define OP_VUpdate 15 /* synopsis: data=r[P3@P2] */ +#define OP_Goto 16 +#define OP_Gosub 17 +#define OP_Return 18 +#define OP_Not 19 /* same as TK_NOT, synopsis: r[P2]= !r[P1] */ +#define OP_InitCoroutine 20 +#define OP_EndCoroutine 21 +#define OP_Yield 22 +#define OP_HaltIfNull 23 /* synopsis: if r[P3]=null halt */ +#define OP_Halt 24 +#define OP_Integer 25 /* synopsis: r[P2]=P1 */ +#define OP_Int64 26 /* synopsis: r[P2]=P4 */ +#define OP_String 27 /* synopsis: r[P2]='P4' (len=P1) */ +#define OP_Null 28 /* synopsis: r[P2..P3]=NULL */ +#define OP_SoftNull 29 /* synopsis: r[P1]=NULL */ +#define OP_Blob 30 /* synopsis: r[P2]=P4 (len=P1) */ +#define OP_Variable 31 /* synopsis: r[P2]=parameter(P1,P4) */ +#define OP_Move 32 /* synopsis: r[P2@P3]=r[P1@P3] */ +#define OP_Copy 33 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */ +#define OP_SCopy 34 /* synopsis: r[P2]=r[P1] */ +#define OP_ResultRow 35 /* synopsis: output=r[P1@P2] */ +#define OP_CollSeq 36 +#define OP_AddImm 37 /* synopsis: r[P1]=r[P1]+P2 */ +#define OP_MustBeInt 38 +#define OP_RealAffinity 39 +#define OP_Permutation 40 +#define OP_Compare 41 +#define OP_Jump 42 +#define OP_Once 43 +#define OP_If 44 +#define OP_IfNot 45 +#define OP_Column 46 /* synopsis: r[P3]=PX */ +#define OP_Affinity 47 /* synopsis: affinity(r[P1@P2]) */ +#define OP_MakeRecord 48 /* synopsis: r[P3]=mkrec(r[P1@P2]) */ +#define OP_Count 49 /* synopsis: r[P2]=count() */ +#define OP_ReadCookie 50 +#define OP_SetCookie 51 +#define OP_OpenRead 52 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenWrite 53 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenAutoindex 54 /* synopsis: nColumn=P2 */ +#define OP_OpenEphemeral 55 /* synopsis: nColumn=P2 */ +#define OP_SorterOpen 56 +#define OP_OpenPseudo 57 /* synopsis: P3 columns in r[P2] */ +#define OP_Close 58 +#define OP_SeekLT 59 +#define OP_SeekLE 60 +#define OP_SeekGE 61 +#define OP_SeekGT 62 +#define OP_Seek 63 /* synopsis: intkey=r[P2] */ +#define OP_NoConflict 64 /* synopsis: key=r[P3@P4] */ +#define OP_NotFound 65 /* synopsis: key=r[P3@P4] */ +#define OP_Found 66 /* synopsis: key=r[P3@P4] */ +#define OP_NotExists 67 /* synopsis: intkey=r[P3] */ +#define OP_Sequence 68 /* synopsis: r[P2]=rowid */ +#define OP_NewRowid 69 /* synopsis: r[P2]=rowid */ +#define OP_Insert 70 /* synopsis: intkey=r[P3] data=r[P2] */ +#define OP_Or 71 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */ +#define OP_And 72 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */ +#define OP_InsertInt 73 /* synopsis: intkey=P3 data=r[P2] */ +#define OP_Delete 74 +#define OP_ResetCount 75 +#define OP_IsNull 76 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */ +#define OP_NotNull 77 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */ +#define OP_Ne 78 /* same as TK_NE, synopsis: if r[P1]!=r[P3] goto P2 */ +#define OP_Eq 79 /* same as TK_EQ, synopsis: if r[P1]==r[P3] goto P2 */ +#define OP_Gt 80 /* same as TK_GT, synopsis: if r[P1]>r[P3] goto P2 */ +#define OP_Le 81 /* same as TK_LE, synopsis: if r[P1]<=r[P3] goto P2 */ +#define OP_Lt 82 /* same as TK_LT, synopsis: if r[P1]=r[P3] goto P2 */ +#define OP_SorterCompare 84 /* synopsis: if key(P1)!=rtrim(r[P3],P4) goto P2 */ +#define OP_BitAnd 85 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */ +#define OP_BitOr 86 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */ +#define OP_ShiftLeft 87 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<>r[P1] */ +#define OP_Add 89 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */ +#define OP_Subtract 90 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */ +#define OP_Multiply 91 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */ +#define OP_Divide 92 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */ +#define OP_Remainder 93 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */ +#define OP_Concat 94 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */ +#define OP_SorterData 95 /* synopsis: r[P2]=data */ +#define OP_BitNot 96 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */ +#define OP_String8 97 /* same as TK_STRING, synopsis: r[P2]='P4' */ +#define OP_RowKey 98 /* synopsis: r[P2]=key */ +#define OP_RowData 99 /* synopsis: r[P2]=data */ +#define OP_Rowid 100 /* synopsis: r[P2]=rowid */ +#define OP_NullRow 101 +#define OP_Last 102 +#define OP_SorterSort 103 +#define OP_Sort 104 +#define OP_Rewind 105 +#define OP_SorterInsert 106 +#define OP_IdxInsert 107 /* synopsis: key=r[P2] */ +#define OP_IdxDelete 108 /* synopsis: key=r[P2@P3] */ +#define OP_IdxRowid 109 /* synopsis: r[P2]=rowid */ +#define OP_IdxLE 110 /* synopsis: key=r[P3@P4] */ +#define OP_IdxGT 111 /* synopsis: key=r[P3@P4] */ +#define OP_IdxLT 112 /* synopsis: key=r[P3@P4] */ +#define OP_IdxGE 113 /* synopsis: key=r[P3@P4] */ +#define OP_Destroy 114 +#define OP_Clear 115 +#define OP_CreateIndex 116 /* synopsis: r[P2]=root iDb=P1 */ +#define OP_CreateTable 117 /* synopsis: r[P2]=root iDb=P1 */ +#define OP_ParseSchema 118 +#define OP_LoadAnalysis 119 +#define OP_DropTable 120 +#define OP_DropIndex 121 +#define OP_DropTrigger 122 +#define OP_IntegrityCk 123 +#define OP_RowSetAdd 124 /* synopsis: rowset(P1)=r[P2] */ +#define OP_RowSetRead 125 /* synopsis: r[P3]=rowset(P1) */ +#define OP_RowSetTest 126 /* synopsis: if r[P3] in rowset(P1) goto P2 */ +#define OP_Program 127 +#define OP_Param 128 +#define OP_FkCounter 129 /* synopsis: fkctr[P1]+=P2 */ +#define OP_FkIfZero 130 /* synopsis: if fkctr[P1]==0 goto P2 */ +#define OP_MemMax 131 /* synopsis: r[P1]=max(r[P1],r[P2]) */ +#define OP_IfPos 132 /* synopsis: if r[P1]>0 goto P2 */ +#define OP_Real 133 /* same as TK_FLOAT, synopsis: r[P2]=P4 */ +#define OP_IfNeg 134 /* synopsis: if r[P1]<0 goto P2 */ +#define OP_IfZero 135 /* synopsis: r[P1]+=P3, if r[P1]==0 goto P2 */ +#define OP_AggFinal 136 /* synopsis: accum=r[P1] N=P2 */ +#define OP_IncrVacuum 137 +#define OP_Expire 138 +#define OP_TableLock 139 /* synopsis: iDb=P1 root=P2 write=P3 */ +#define OP_VBegin 140 +#define OP_VCreate 141 +#define OP_VDestroy 142 +#define OP_ToText 143 /* same as TK_TO_TEXT */ +#define OP_ToBlob 144 /* same as TK_TO_BLOB */ +#define OP_ToNumeric 145 /* same as TK_TO_NUMERIC */ +#define OP_ToInt 146 /* same as TK_TO_INT */ +#define OP_ToReal 147 /* same as TK_TO_REAL */ +#define OP_VOpen 148 +#define OP_VColumn 149 /* synopsis: r[P3]=vcolumn(P2) */ +#define OP_VNext 150 +#define OP_VRename 151 +#define OP_Pagecount 152 +#define OP_MaxPgcnt 153 +#define OP_Init 154 /* synopsis: Start at P2 */ +#define OP_Noop 155 +#define OP_Explain 156 /* Properties such as "out2" or "jump" that are specified in @@ -9110,24 +9294,25 @@ typedef struct VdbeOpList VdbeOpList; #define OPFLG_OUT3 0x0040 /* out3: P3 is an output */ #define OPFLG_INITIALIZER {\ /* 0 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01,\ -/* 8 */ 0x00, 0x00, 0x02, 0x00, 0x01, 0x00, 0x01, 0x01,\ -/* 16 */ 0x04, 0x04, 0x10, 0x24, 0x00, 0x02, 0x02, 0x02,\ -/* 24 */ 0x02, 0x02, 0x02, 0x00, 0x00, 0x24, 0x00, 0x00,\ -/* 32 */ 0x04, 0x05, 0x04, 0x00, 0x00, 0x01, 0x01, 0x05,\ -/* 40 */ 0x05, 0x00, 0x00, 0x00, 0x02, 0x02, 0x10, 0x00,\ -/* 48 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11,\ -/* 56 */ 0x11, 0x11, 0x11, 0x08, 0x11, 0x11, 0x11, 0x11,\ -/* 64 */ 0x02, 0x02, 0x00, 0x00, 0x4c, 0x4c, 0x00, 0x00,\ -/* 72 */ 0x00, 0x05, 0x05, 0x15, 0x15, 0x15, 0x15, 0x15,\ -/* 80 */ 0x15, 0x00, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c,\ -/* 88 */ 0x4c, 0x4c, 0x4c, 0x4c, 0x00, 0x24, 0x02, 0x00,\ -/* 96 */ 0x02, 0x00, 0x01, 0x01, 0x01, 0x01, 0x08, 0x08,\ -/* 104 */ 0x00, 0x02, 0x01, 0x01, 0x02, 0x00, 0x02, 0x02,\ -/* 112 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x45,\ -/* 120 */ 0x15, 0x01, 0x02, 0x00, 0x01, 0x08, 0x05, 0x05,\ -/* 128 */ 0x05, 0x00, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00,\ -/* 136 */ 0x00, 0x00, 0x00, 0x01, 0x00, 0x04, 0x04, 0x04,\ -/* 144 */ 0x04, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00,} +/* 8 */ 0x01, 0x01, 0x00, 0x00, 0x02, 0x00, 0x01, 0x00,\ +/* 16 */ 0x01, 0x01, 0x04, 0x24, 0x01, 0x04, 0x05, 0x10,\ +/* 24 */ 0x00, 0x02, 0x02, 0x02, 0x02, 0x00, 0x02, 0x02,\ +/* 32 */ 0x00, 0x00, 0x20, 0x00, 0x00, 0x04, 0x05, 0x04,\ +/* 40 */ 0x00, 0x00, 0x01, 0x01, 0x05, 0x05, 0x00, 0x00,\ +/* 48 */ 0x00, 0x02, 0x02, 0x10, 0x00, 0x00, 0x00, 0x00,\ +/* 56 */ 0x00, 0x00, 0x00, 0x11, 0x11, 0x11, 0x11, 0x08,\ +/* 64 */ 0x11, 0x11, 0x11, 0x11, 0x02, 0x02, 0x00, 0x4c,\ +/* 72 */ 0x4c, 0x00, 0x00, 0x00, 0x05, 0x05, 0x15, 0x15,\ +/* 80 */ 0x15, 0x15, 0x15, 0x15, 0x00, 0x4c, 0x4c, 0x4c,\ +/* 88 */ 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x4c, 0x00,\ +/* 96 */ 0x24, 0x02, 0x00, 0x00, 0x02, 0x00, 0x01, 0x01,\ +/* 104 */ 0x01, 0x01, 0x08, 0x08, 0x00, 0x02, 0x01, 0x01,\ +/* 112 */ 0x01, 0x01, 0x02, 0x00, 0x02, 0x02, 0x00, 0x00,\ +/* 120 */ 0x00, 0x00, 0x00, 0x00, 0x0c, 0x45, 0x15, 0x01,\ +/* 128 */ 0x02, 0x00, 0x01, 0x08, 0x05, 0x02, 0x05, 0x05,\ +/* 136 */ 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04,\ +/* 144 */ 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x01, 0x00,\ +/* 152 */ 0x02, 0x02, 0x01, 0x00, 0x00,} /************** End of opcodes.h *********************************************/ /************** Continuing where we left off in vdbe.h ***********************/ @@ -9136,14 +9321,14 @@ typedef struct VdbeOpList VdbeOpList; ** Prototypes for the VDBE interface. See comments on the implementation ** for a description of what each of these routines does. */ -SQLITE_PRIVATE Vdbe *sqlite3VdbeCreate(sqlite3*); +SQLITE_PRIVATE Vdbe *sqlite3VdbeCreate(Parse*); SQLITE_PRIVATE int sqlite3VdbeAddOp0(Vdbe*,int); SQLITE_PRIVATE int sqlite3VdbeAddOp1(Vdbe*,int,int); SQLITE_PRIVATE int sqlite3VdbeAddOp2(Vdbe*,int,int,int); SQLITE_PRIVATE int sqlite3VdbeAddOp3(Vdbe*,int,int,int,int); SQLITE_PRIVATE int sqlite3VdbeAddOp4(Vdbe*,int,int,int,int,const char *zP4,int); SQLITE_PRIVATE int sqlite3VdbeAddOp4Int(Vdbe*,int,int,int,int,int); -SQLITE_PRIVATE int sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp); +SQLITE_PRIVATE int sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp, int iLineno); SQLITE_PRIVATE void sqlite3VdbeAddParseSchemaOp(Vdbe*,int,char*); SQLITE_PRIVATE void sqlite3VdbeChangeP1(Vdbe*, u32 addr, int P1); SQLITE_PRIVATE void sqlite3VdbeChangeP2(Vdbe*, u32 addr, int P2); @@ -9151,7 +9336,9 @@ SQLITE_PRIVATE void sqlite3VdbeChangeP3(Vdbe*, u32 addr, int P3); SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe*, u8 P5); SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe*, int addr); SQLITE_PRIVATE void sqlite3VdbeChangeToNoop(Vdbe*, int addr); +SQLITE_PRIVATE int sqlite3VdbeDeletePriorOpcode(Vdbe*, u8 op); SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe*, int addr, const char *zP4, int N); +SQLITE_PRIVATE void sqlite3VdbeSetP4KeyInfo(Parse*, Index*); SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe*, int); SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetOp(Vdbe*, int); SQLITE_PRIVATE int sqlite3VdbeMakeLabel(Vdbe*); @@ -9164,7 +9351,6 @@ SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe*, int); SQLITE_PRIVATE int sqlite3VdbeCurrentAddr(Vdbe*); #ifdef SQLITE_DEBUG SQLITE_PRIVATE int sqlite3VdbeAssertMayAbort(Vdbe *, int); -SQLITE_PRIVATE void sqlite3VdbeTrace(Vdbe*,FILE*); #endif SQLITE_PRIVATE void sqlite3VdbeResetStepResult(Vdbe*); SQLITE_PRIVATE void sqlite3VdbeRewind(Vdbe*); @@ -9183,22 +9369,74 @@ SQLITE_PRIVATE char *sqlite3VdbeExpandSql(Vdbe*, const char*); #endif SQLITE_PRIVATE void sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,UnpackedRecord*); -SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*); +SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,const UnpackedRecord*,int); SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(KeyInfo *, char *, int, char **); +typedef int (*RecordCompare)(int,const void*,const UnpackedRecord*,int); +SQLITE_PRIVATE RecordCompare sqlite3VdbeFindCompare(UnpackedRecord*); + #ifndef SQLITE_OMIT_TRIGGER SQLITE_PRIVATE void sqlite3VdbeLinkSubProgram(Vdbe *, SubProgram *); #endif - -#ifndef NDEBUG +/* Use SQLITE_ENABLE_COMMENTS to enable generation of extra comments on +** each VDBE opcode. +** +** Use the SQLITE_ENABLE_MODULE_COMMENTS macro to see some extra no-op +** comments in VDBE programs that show key decision points in the code +** generator. +*/ +#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS SQLITE_PRIVATE void sqlite3VdbeComment(Vdbe*, const char*, ...); # define VdbeComment(X) sqlite3VdbeComment X SQLITE_PRIVATE void sqlite3VdbeNoopComment(Vdbe*, const char*, ...); # define VdbeNoopComment(X) sqlite3VdbeNoopComment X +# ifdef SQLITE_ENABLE_MODULE_COMMENTS +# define VdbeModuleComment(X) sqlite3VdbeNoopComment X +# else +# define VdbeModuleComment(X) +# endif #else # define VdbeComment(X) # define VdbeNoopComment(X) +# define VdbeModuleComment(X) +#endif + +/* +** The VdbeCoverage macros are used to set a coverage testing point +** for VDBE branch instructions. The coverage testing points are line +** numbers in the sqlite3.c source file. VDBE branch coverage testing +** only works with an amalagmation build. That's ok since a VDBE branch +** coverage build designed for testing the test suite only. No application +** should ever ship with VDBE branch coverage measuring turned on. +** +** VdbeCoverage(v) // Mark the previously coded instruction +** // as a branch +** +** VdbeCoverageIf(v, conditional) // Mark previous if conditional true +** +** VdbeCoverageAlwaysTaken(v) // Previous branch is always taken +** +** VdbeCoverageNeverTaken(v) // Previous branch is never taken +** +** Every VDBE branch operation must be tagged with one of the macros above. +** If not, then when "make test" is run with -DSQLITE_VDBE_COVERAGE and +** -DSQLITE_DEBUG then an ALWAYS() will fail in the vdbeTakeBranch() +** routine in vdbe.c, alerting the developer to the missed tag. +*/ +#ifdef SQLITE_VDBE_COVERAGE +SQLITE_PRIVATE void sqlite3VdbeSetLineNumber(Vdbe*,int); +# define VdbeCoverage(v) sqlite3VdbeSetLineNumber(v,__LINE__) +# define VdbeCoverageIf(v,x) if(x)sqlite3VdbeSetLineNumber(v,__LINE__) +# define VdbeCoverageAlwaysTaken(v) sqlite3VdbeSetLineNumber(v,2); +# define VdbeCoverageNeverTaken(v) sqlite3VdbeSetLineNumber(v,1); +# define VDBE_OFFSET_LINENO(x) (__LINE__+x) +#else +# define VdbeCoverage(v) +# define VdbeCoverageIf(v,x) +# define VdbeCoverageAlwaysTaken(v) +# define VdbeCoverageNeverTaken(v) +# define VDBE_OFFSET_LINENO(x) 0 #endif #endif @@ -9290,8 +9528,20 @@ typedef struct PgHdr DbPage; /* ** Flags that make up the mask passed to sqlite3PagerAcquire(). */ -#define PAGER_ACQUIRE_NOCONTENT 0x01 /* Do not load data from disk */ -#define PAGER_ACQUIRE_READONLY 0x02 /* Read-only page is acceptable */ +#define PAGER_GET_NOCONTENT 0x01 /* Do not load data from disk */ +#define PAGER_GET_READONLY 0x02 /* Read-only page is acceptable */ + +/* +** Flags for sqlite3PagerSetFlags() +*/ +#define PAGER_SYNCHRONOUS_OFF 0x01 /* PRAGMA synchronous=OFF */ +#define PAGER_SYNCHRONOUS_NORMAL 0x02 /* PRAGMA synchronous=NORMAL */ +#define PAGER_SYNCHRONOUS_FULL 0x03 /* PRAGMA synchronous=FULL */ +#define PAGER_SYNCHRONOUS_MASK 0x03 /* Mask for three values above */ +#define PAGER_FULLFSYNC 0x04 /* PRAGMA fullfsync=ON */ +#define PAGER_CKPT_FULLFSYNC 0x08 /* PRAGMA checkpoint_fullfsync=ON */ +#define PAGER_CACHESPILL 0x10 /* PRAGMA cache_spill=ON */ +#define PAGER_FLAGS_MASK 0x1c /* All above except SYNCHRONOUS */ /* ** The remainder of this file contains the declarations of the functions @@ -9319,7 +9569,7 @@ SQLITE_PRIVATE int sqlite3PagerMaxPageCount(Pager*, int); SQLITE_PRIVATE void sqlite3PagerSetCachesize(Pager*, int); SQLITE_PRIVATE void sqlite3PagerSetMmapLimit(Pager *, sqlite3_int64); SQLITE_PRIVATE void sqlite3PagerShrink(Pager*); -SQLITE_PRIVATE void sqlite3PagerSetSafetyLevel(Pager*,int,int,int); +SQLITE_PRIVATE void sqlite3PagerSetFlags(Pager*,unsigned); SQLITE_PRIVATE int sqlite3PagerLockingMode(Pager *, int); SQLITE_PRIVATE int sqlite3PagerSetJournalMode(Pager *, int); SQLITE_PRIVATE int sqlite3PagerGetJournalMode(Pager*); @@ -9333,6 +9583,7 @@ SQLITE_PRIVATE int sqlite3PagerAcquire(Pager *pPager, Pgno pgno, DbPage **ppPage SQLITE_PRIVATE DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno); SQLITE_PRIVATE void sqlite3PagerRef(DbPage*); SQLITE_PRIVATE void sqlite3PagerUnref(DbPage*); +SQLITE_PRIVATE void sqlite3PagerUnrefNotNull(DbPage*); /* Operations on page references. */ SQLITE_PRIVATE int sqlite3PagerWrite(DbPage*); @@ -9347,7 +9598,7 @@ SQLITE_PRIVATE void sqlite3PagerPagecount(Pager*, int*); SQLITE_PRIVATE int sqlite3PagerBegin(Pager*, int exFlag, int); SQLITE_PRIVATE int sqlite3PagerCommitPhaseOne(Pager*,const char *zMaster, int); SQLITE_PRIVATE int sqlite3PagerExclusiveLock(Pager*); -SQLITE_PRIVATE int sqlite3PagerSync(Pager *pPager); +SQLITE_PRIVATE int sqlite3PagerSync(Pager *pPager, const char *zMaster); SQLITE_PRIVATE int sqlite3PagerCommitPhaseTwo(Pager*); SQLITE_PRIVATE int sqlite3PagerRollback(Pager*); SQLITE_PRIVATE int sqlite3PagerOpenSavepoint(Pager *pPager, int n); @@ -10117,8 +10368,6 @@ struct sqlite3 { void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*); void *pCollNeededArg; sqlite3_value *pErr; /* Most recent error message */ - char *zErrMsg; /* Most recent error message (UTF-8 encoded) */ - char *zErrMsg16; /* Most recent error message (UTF-16 encoded) */ union { volatile int isInterrupted; /* True if sqlite3_interrupt has been called */ double notUsed1; /* Spacer */ @@ -10182,32 +10431,34 @@ struct sqlite3 { */ #define SQLITE_VdbeTrace 0x00000001 /* True to trace VDBE execution */ #define SQLITE_InternChanges 0x00000002 /* Uncommitted Hash table changes */ -#define SQLITE_FullColNames 0x00000004 /* Show full column names on SELECT */ -#define SQLITE_ShortColNames 0x00000008 /* Show short columns names */ -#define SQLITE_CountRows 0x00000010 /* Count rows changed by INSERT, */ +#define SQLITE_FullFSync 0x00000004 /* Use full fsync on the backend */ +#define SQLITE_CkptFullFSync 0x00000008 /* Use full fsync for checkpoint */ +#define SQLITE_CacheSpill 0x00000010 /* OK to spill pager cache */ +#define SQLITE_FullColNames 0x00000020 /* Show full column names on SELECT */ +#define SQLITE_ShortColNames 0x00000040 /* Show short columns names */ +#define SQLITE_CountRows 0x00000080 /* Count rows changed by INSERT, */ /* DELETE, or UPDATE and return */ /* the count using a callback. */ -#define SQLITE_NullCallback 0x00000020 /* Invoke the callback once if the */ +#define SQLITE_NullCallback 0x00000100 /* Invoke the callback once if the */ /* result set is empty */ -#define SQLITE_SqlTrace 0x00000040 /* Debug print SQL as it executes */ -#define SQLITE_VdbeListing 0x00000080 /* Debug listings of VDBE programs */ -#define SQLITE_WriteSchema 0x00000100 /* OK to update SQLITE_MASTER */ -#define SQLITE_VdbeAddopTrace 0x00000200 /* Trace sqlite3VdbeAddOp() calls */ -#define SQLITE_IgnoreChecks 0x00000400 /* Do not enforce check constraints */ -#define SQLITE_ReadUncommitted 0x0000800 /* For shared-cache mode */ -#define SQLITE_LegacyFileFmt 0x00001000 /* Create new databases in format 1 */ -#define SQLITE_FullFSync 0x00002000 /* Use full fsync on the backend */ -#define SQLITE_CkptFullFSync 0x00004000 /* Use full fsync for checkpoint */ -#define SQLITE_RecoveryMode 0x00008000 /* Ignore schema errors */ -#define SQLITE_ReverseOrder 0x00010000 /* Reverse unordered SELECTs */ -#define SQLITE_RecTriggers 0x00020000 /* Enable recursive triggers */ -#define SQLITE_ForeignKeys 0x00040000 /* Enforce foreign key constraints */ -#define SQLITE_AutoIndex 0x00080000 /* Enable automatic indexes */ -#define SQLITE_PreferBuiltin 0x00100000 /* Preference to built-in funcs */ -#define SQLITE_LoadExtension 0x00200000 /* Enable load_extension */ -#define SQLITE_EnableTrigger 0x00400000 /* True to enable triggers */ -#define SQLITE_DeferFKs 0x00800000 /* Defer all FK constraints */ -#define SQLITE_QueryOnly 0x01000000 /* Disable database changes */ +#define SQLITE_SqlTrace 0x00000200 /* Debug print SQL as it executes */ +#define SQLITE_VdbeListing 0x00000400 /* Debug listings of VDBE programs */ +#define SQLITE_WriteSchema 0x00000800 /* OK to update SQLITE_MASTER */ +#define SQLITE_VdbeAddopTrace 0x00001000 /* Trace sqlite3VdbeAddOp() calls */ +#define SQLITE_IgnoreChecks 0x00002000 /* Do not enforce check constraints */ +#define SQLITE_ReadUncommitted 0x0004000 /* For shared-cache mode */ +#define SQLITE_LegacyFileFmt 0x00008000 /* Create new databases in format 1 */ +#define SQLITE_RecoveryMode 0x00010000 /* Ignore schema errors */ +#define SQLITE_ReverseOrder 0x00020000 /* Reverse unordered SELECTs */ +#define SQLITE_RecTriggers 0x00040000 /* Enable recursive triggers */ +#define SQLITE_ForeignKeys 0x00080000 /* Enforce foreign key constraints */ +#define SQLITE_AutoIndex 0x00100000 /* Enable automatic indexes */ +#define SQLITE_PreferBuiltin 0x00200000 /* Preference to built-in funcs */ +#define SQLITE_LoadExtension 0x00400000 /* Enable load_extension */ +#define SQLITE_EnableTrigger 0x00800000 /* True to enable triggers */ +#define SQLITE_DeferFKs 0x01000000 /* Defer all FK constraints */ +#define SQLITE_QueryOnly 0x02000000 /* Disable database changes */ +#define SQLITE_VdbeEQP 0x04000000 /* Debug EXPLAIN QUERY PLAN */ /* @@ -10219,7 +10470,7 @@ struct sqlite3 { #define SQLITE_ColumnCache 0x0002 /* Column cache */ #define SQLITE_GroupByOrder 0x0004 /* GROUPBY cover of ORDERBY */ #define SQLITE_FactorOutConst 0x0008 /* Constant factoring */ -#define SQLITE_IdxRealAsInt 0x0010 /* Store REAL as INT in indices */ +/* not used 0x0010 // Was: SQLITE_IdxRealAsInt */ #define SQLITE_DistinctOpt 0x0020 /* DISTINCT using indexes */ #define SQLITE_CoverIdxScan 0x0040 /* Covering index scans */ #define SQLITE_OrderByIdxJoin 0x0080 /* ORDER BY of joins via index */ @@ -10227,6 +10478,7 @@ struct sqlite3 { #define SQLITE_Transitive 0x0200 /* Transitive constraints */ #define SQLITE_OmitNoopJoin 0x0400 /* Omit unused tables in joins */ #define SQLITE_Stat3 0x0800 /* Use the SQLITE_STAT3 table */ +#define SQLITE_AdjustOutEst 0x1000 /* Adjust output estimates using WHERE */ #define SQLITE_AllOpts 0xffff /* All optimizations */ /* @@ -10240,6 +10492,12 @@ struct sqlite3 { #define OptimizationEnabled(db, mask) 1 #endif +/* +** Return true if it OK to factor constant expressions into the initialization +** code. The argument is a Parse object for the code generator. +*/ +#define ConstFactorOk(P) ((P)->okConstFactor) + /* ** Possible values for the sqlite.magic field. ** The numbers are obtained at random and have no special meaning, other @@ -10260,8 +10518,7 @@ struct sqlite3 { */ struct FuncDef { i16 nArg; /* Number of arguments. -1 means unlimited */ - u8 iPrefEnc; /* Preferred text encoding (SQLITE_UTF8, 16LE, 16BE) */ - u8 flags; /* Some combination of SQLITE_FUNC_* */ + u16 funcFlags; /* Some combination of SQLITE_FUNC_* */ void *pUserData; /* User data parameter */ FuncDef *pNext; /* Next function with same name */ void (*xFunc)(sqlite3_context*,int,sqlite3_value**); /* Regular function */ @@ -10297,14 +10554,17 @@ struct FuncDestructor { ** values must correspond to OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG. There ** are assert() statements in the code to verify this. */ -#define SQLITE_FUNC_LIKE 0x01 /* Candidate for the LIKE optimization */ -#define SQLITE_FUNC_CASE 0x02 /* Case-sensitive LIKE-type function */ -#define SQLITE_FUNC_EPHEM 0x04 /* Ephemeral. Delete with VDBE */ -#define SQLITE_FUNC_NEEDCOLL 0x08 /* sqlite3GetFuncCollSeq() might be called */ -#define SQLITE_FUNC_COUNT 0x10 /* Built-in count(*) aggregate */ -#define SQLITE_FUNC_COALESCE 0x20 /* Built-in coalesce() or ifnull() function */ -#define SQLITE_FUNC_LENGTH 0x40 /* Built-in length() function */ -#define SQLITE_FUNC_TYPEOF 0x80 /* Built-in typeof() function */ +#define SQLITE_FUNC_ENCMASK 0x003 /* SQLITE_UTF8, SQLITE_UTF16BE or UTF16LE */ +#define SQLITE_FUNC_LIKE 0x004 /* Candidate for the LIKE optimization */ +#define SQLITE_FUNC_CASE 0x008 /* Case-sensitive LIKE-type function */ +#define SQLITE_FUNC_EPHEM 0x010 /* Ephemeral. Delete with VDBE */ +#define SQLITE_FUNC_NEEDCOLL 0x020 /* sqlite3GetFuncCollSeq() might be called */ +#define SQLITE_FUNC_LENGTH 0x040 /* Built-in length() function */ +#define SQLITE_FUNC_TYPEOF 0x080 /* Built-in typeof() function */ +#define SQLITE_FUNC_COUNT 0x100 /* Built-in count(*) aggregate */ +#define SQLITE_FUNC_COALESCE 0x200 /* Built-in coalesce() or ifnull() */ +#define SQLITE_FUNC_UNLIKELY 0x400 /* Built-in unlikely() function */ +#define SQLITE_FUNC_CONSTANT 0x800 /* Constant inputs give a constant output */ /* ** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are @@ -10317,6 +10577,9 @@ struct FuncDestructor { ** as the user-data (sqlite3_user_data()) for the function. If ** argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set. ** +** VFUNCTION(zName, nArg, iArg, bNC, xFunc) +** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag. +** ** AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal) ** Used to create an aggregate function definition implemented by ** the C functions xStep and xFinal. The first four parameters @@ -10332,18 +10595,22 @@ struct FuncDestructor { ** parameter. */ #define FUNCTION(zName, nArg, iArg, bNC, xFunc) \ - {nArg, SQLITE_UTF8, (bNC*SQLITE_FUNC_NEEDCOLL), \ + {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ + SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0} +#define VFUNCTION(zName, nArg, iArg, bNC, xFunc) \ + {nArg, SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0} #define FUNCTION2(zName, nArg, iArg, bNC, xFunc, extraFlags) \ - {nArg, SQLITE_UTF8, (bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags, \ + {nArg,SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags,\ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, #zName, 0, 0} #define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \ - {nArg, SQLITE_UTF8, bNC*SQLITE_FUNC_NEEDCOLL, \ + {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ pArg, 0, xFunc, 0, 0, #zName, 0, 0} #define LIKEFUNC(zName, nArg, arg, flags) \ - {nArg, SQLITE_UTF8, flags, (void *)arg, 0, likeFunc, 0, 0, #zName, 0, 0} + {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|flags, \ + (void *)arg, 0, likeFunc, 0, 0, #zName, 0, 0} #define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \ - {nArg, SQLITE_UTF8, nc*SQLITE_FUNC_NEEDCOLL, \ + {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL), \ SQLITE_INT_TO_PTR(arg), 0, 0, xStep,xFinal,#zName,0,0} /* @@ -10392,7 +10659,8 @@ struct Column { char *zColl; /* Collating sequence. If NULL, use the default */ u8 notNull; /* An OE_ code for handling a NOT NULL constraint */ char affinity; /* One of the SQLITE_AFF_... values */ - u16 colFlags; /* Boolean properties. See COLFLAG_ defines below */ + u8 szEst; /* Estimated size of this column. INT==1 */ + u8 colFlags; /* Boolean properties. See COLFLAG_ defines below */ }; /* Allowed values for Column.colFlags: @@ -10454,10 +10722,16 @@ struct CollSeq { /* ** Additional bit values that can be ORed with an affinity without ** changing the affinity. +** +** The SQLITE_NOTNULL flag is a combination of NULLEQ and JUMPIFNULL. +** It causes an assert() to fire if either operand to a comparison +** operator is NULL. It is added to certain comparison operators to +** prove that the operands are always NOT NULL. */ #define SQLITE_JUMPIFNULL 0x08 /* jumps if either operand is NULL */ #define SQLITE_STOREP2 0x10 /* Store result in reg[P2] rather than jump */ #define SQLITE_NULLEQ 0x80 /* NULL=NULL */ +#define SQLITE_NOTNULL 0x88 /* Assert that operands are never NULL */ /* ** An object of this type is created for each virtual table present in @@ -10556,6 +10830,7 @@ struct Table { i16 iPKey; /* If not negative, use aCol[iPKey] as the primary key */ i16 nCol; /* Number of columns in this table */ u16 nRef; /* Number of pointers to this Table */ + LogEst szTabRow; /* Estimated size of each table row in bytes */ u8 tabFlags; /* Mask of TF_* values */ u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */ #ifndef SQLITE_OMIT_ALTERTABLE @@ -10572,13 +10847,14 @@ struct Table { }; /* -** Allowed values for Tabe.tabFlags. +** Allowed values for Table.tabFlags. */ #define TF_Readonly 0x01 /* Read-only system table */ #define TF_Ephemeral 0x02 /* An ephemeral table */ #define TF_HasPrimaryKey 0x04 /* Table has a primary key */ #define TF_Autoincrement 0x08 /* Integer primary key is autoincrement */ #define TF_Virtual 0x10 /* Is a virtual table */ +#define TF_WithoutRowid 0x20 /* No rowid used. PRIMARY KEY is the key */ /* @@ -10594,6 +10870,9 @@ struct Table { # define IsHiddenColumn(X) 0 #endif +/* Does the table have a rowid */ +#define HasRowid(X) (((X)->tabFlags & TF_WithoutRowid)==0) + /* ** Each foreign key constraint is an instance of the following structure. ** @@ -10608,26 +10887,35 @@ struct Table { ** ); ** ** For foreign key "fk1", the from-table is "ex1" and the to-table is "ex2". +** Equivalent names: +** +** from-table == child-table +** to-table == parent-table ** ** Each REFERENCES clause generates an instance of the following structure ** which is attached to the from-table. The to-table need not exist when ** the from-table is created. The existence of the to-table is not checked. +** +** The list of all parents for child Table X is held at X.pFKey. +** +** A list of all children for a table named Z (which might not even exist) +** is held in Schema.fkeyHash with a hash key of Z. */ struct FKey { Table *pFrom; /* Table containing the REFERENCES clause (aka: Child) */ - FKey *pNextFrom; /* Next foreign key in pFrom */ + FKey *pNextFrom; /* Next FKey with the same in pFrom. Next parent of pFrom */ char *zTo; /* Name of table that the key points to (aka: Parent) */ - FKey *pNextTo; /* Next foreign key on table named zTo */ - FKey *pPrevTo; /* Previous foreign key on table named zTo */ + FKey *pNextTo; /* Next with the same zTo. Next child of zTo. */ + FKey *pPrevTo; /* Previous with the same zTo */ int nCol; /* Number of columns in this key */ /* EV: R-30323-21917 */ - u8 isDeferred; /* True if constraint checking is deferred till COMMIT */ - u8 aAction[2]; /* ON DELETE and ON UPDATE actions, respectively */ - Trigger *apTrigger[2]; /* Triggers for aAction[] actions */ - struct sColMap { /* Mapping of columns in pFrom to columns in zTo */ - int iFrom; /* Index of column in pFrom */ - char *zCol; /* Name of column in zTo. If 0 use PRIMARY KEY */ - } aCol[1]; /* One entry for each of nCol column s */ + u8 isDeferred; /* True if constraint checking is deferred till COMMIT */ + u8 aAction[2]; /* ON DELETE and ON UPDATE actions, respectively */ + Trigger *apTrigger[2];/* Triggers for aAction[] actions */ + struct sColMap { /* Mapping of columns in pFrom to columns in zTo */ + int iFrom; /* Index of column in pFrom */ + char *zCol; /* Name of column in zTo. If NULL use PRIMARY KEY */ + } aCol[1]; /* One entry for each of nCol columns */ }; /* @@ -10667,7 +10955,7 @@ struct FKey { #define OE_SetDflt 8 /* Set the foreign key value to its default */ #define OE_Cascade 9 /* Cascade the changes */ -#define OE_Default 99 /* Do whatever the default action is */ +#define OE_Default 10 /* Do whatever the default action is */ /* @@ -10680,9 +10968,11 @@ struct FKey { ** for the rowid at the end. */ struct KeyInfo { - sqlite3 *db; /* The database connection */ + u32 nRef; /* Number of references to this KeyInfo object */ u8 enc; /* Text encoding - one of the SQLITE_UTF* values */ - u16 nField; /* Maximum index for aColl[] and aSortOrder[] */ + u16 nField; /* Number of key columns in the index */ + u16 nXField; /* Number of columns beyond the key columns */ + sqlite3 *db; /* The database connection */ u8 *aSortOrder; /* Sort order for each column. */ CollSeq *aColl[1]; /* Collating sequence for each term of the key */ }; @@ -10700,21 +10990,19 @@ struct KeyInfo { ** ** This structure holds a record that has already been disassembled ** into its constituent fields. +** +** The r1 and r2 member variables are only used by the optimized comparison +** functions vdbeRecordCompareInt() and vdbeRecordCompareString(). */ struct UnpackedRecord { KeyInfo *pKeyInfo; /* Collation and sort-order information */ u16 nField; /* Number of entries in apMem[] */ - u8 flags; /* Boolean settings. UNPACKED_... below */ - i64 rowid; /* Used by UNPACKED_PREFIX_SEARCH */ + i8 default_rc; /* Comparison result if keys are equal */ Mem *aMem; /* Values */ + int r1; /* Value to return if (lhs > rhs) */ + int r2; /* Value to return if (rhs < lhs) */ }; -/* -** Allowed values of UnpackedRecord.flags -*/ -#define UNPACKED_INCRKEY 0x01 /* Make this key an epsilon larger */ -#define UNPACKED_PREFIX_MATCH 0x02 /* A prefix match is considered OK */ -#define UNPACKED_PREFIX_SEARCH 0x04 /* Ignore final (rowid) field */ /* ** Each SQL index is represented in memory by an @@ -10744,7 +11032,7 @@ struct UnpackedRecord { */ struct Index { char *zName; /* Name of this index */ - int *aiColumn; /* Which columns are used by this index. 1st is 0 */ + i16 *aiColumn; /* Which columns are used by this index. 1st is 0 */ tRowcnt *aiRowEst; /* From ANALYZE: Est. rows selected by each column */ Table *pTable; /* The SQL table being indexed */ char *zColAff; /* String defining the affinity of each column */ @@ -10753,15 +11041,21 @@ struct Index { u8 *aSortOrder; /* for each column: True==DESC, False==ASC */ char **azColl; /* Array of collation sequence names for index */ Expr *pPartIdxWhere; /* WHERE clause for partial indices */ + KeyInfo *pKeyInfo; /* A KeyInfo object suitable for this index */ int tnum; /* DB Page containing root of this index */ - u16 nColumn; /* Number of columns in table used by this index */ + LogEst szIdxRow; /* Estimated average row size in bytes */ + u16 nKeyCol; /* Number of columns forming the key */ + u16 nColumn; /* Number of columns stored in the index */ u8 onError; /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */ unsigned autoIndex:2; /* 1==UNIQUE, 2==PRIMARY KEY, 0==CREATE INDEX */ unsigned bUnordered:1; /* Use this index for == or IN queries only */ unsigned uniqNotNull:1; /* True if UNIQUE and NOT NULL for all columns */ -#ifdef SQLITE_ENABLE_STAT3 + unsigned isResized:1; /* True if resizeIndexObject() has been called */ + unsigned isCovering:1; /* True if this is a covering index */ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 int nSample; /* Number of elements in aSample[] */ - tRowcnt avgEq; /* Average nEq value for key values not in aSample */ + int nSampleCol; /* Size of IndexSample.anEq[] and so on */ + tRowcnt *aAvgEq; /* Average nEq values for keys not in aSample */ IndexSample *aSample; /* Samples of the left-most key */ #endif }; @@ -10772,16 +11066,11 @@ struct Index { ** analyze.c source file for additional information. */ struct IndexSample { - union { - char *z; /* Value if eType is SQLITE_TEXT or SQLITE_BLOB */ - double r; /* Value if eType is SQLITE_FLOAT */ - i64 i; /* Value if eType is SQLITE_INTEGER */ - } u; - u8 eType; /* SQLITE_NULL, SQLITE_INTEGER ... etc. */ - int nByte; /* Size in byte of text or blob. */ - tRowcnt nEq; /* Est. number of rows where the key equals this sample */ - tRowcnt nLt; /* Est. number of rows where key is less than this sample */ - tRowcnt nDLt; /* Est. number of distinct keys less than this sample */ + void *p; /* Pointer to sampled record */ + int n; /* Size of record in bytes */ + tRowcnt *anEq; /* Est. number of rows where the key equals this sample */ + tRowcnt *anLt; /* Est. number of rows where key is less than this sample */ + tRowcnt *anDLt; /* Est. number of distinct keys less than this sample */ }; /* @@ -10818,6 +11107,7 @@ struct AggInfo { int sortingIdx; /* Cursor number of the sorting index */ int sortingIdxPTab; /* Cursor number of pseudo-table */ int nSortingColumn; /* Number of columns in the sorting index */ + int mnReg, mxReg; /* Range of registers allocated for aCol and aFunc */ ExprList *pGroupBy; /* The group by clause */ struct AggInfo_col { /* For each column used in source tables */ Table *pTab; /* Source table */ @@ -10922,7 +11212,7 @@ typedef int ynVar; struct Expr { u8 op; /* Operation performed by this node */ char affinity; /* The affinity of the column or 0 if not a column */ - u16 flags; /* Various flags. EP_* See below */ + u32 flags; /* Various flags. EP_* See below */ union { char *zToken; /* Token value. Zero terminated and dequoted */ int iValue; /* Non-negative integer value if EP_IntValue */ @@ -10936,8 +11226,8 @@ struct Expr { Expr *pLeft; /* Left subnode */ Expr *pRight; /* Right subnode */ union { - ExprList *pList; /* Function arguments or in " IN ( IN (