client_golang/prometheus/gauge.go

312 lines
10 KiB
Go
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

// Copyright 2014 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package prometheus
import (
"math"
"sync/atomic"
"time"
dto "github.com/prometheus/client_model/go"
)
// Gauge is a Metric that represents a single numerical value that can
// arbitrarily go up and down.
//
// A Gauge is typically used for measured values like temperatures or current
// memory usage, but also "counts" that can go up and down, like the number of
// running goroutines.
//
// To create Gauge instances, use NewGauge.
type Gauge interface {
Metric
Collector
// Set sets the Gauge to an arbitrary value.
Set(float64)
// Inc increments the Gauge by 1. Use Add to increment it by arbitrary
// values.
Inc()
// Dec decrements the Gauge by 1. Use Sub to decrement it by arbitrary
// values.
Dec()
// Add adds the given value to the Gauge. (The value can be negative,
// resulting in a decrease of the Gauge.)
Add(float64)
// Sub subtracts the given value from the Gauge. (The value can be
// negative, resulting in an increase of the Gauge.)
Sub(float64)
// SetToCurrentTime sets the Gauge to the current Unix time in seconds.
SetToCurrentTime()
}
// GaugeOpts is an alias for Opts. See there for doc comments.
type GaugeOpts Opts
// GaugeVecOpts bundles the options to create a GaugeVec metric.
// It is mandatory to set GaugeOpts, see there for mandatory fields. VariableLabels
// is optional and can safely be left to its default value.
type GaugeVecOpts struct {
GaugeOpts
// VariableLabels are used to partition the metric vector by the given set
// of labels. Each label value will be constrained with the optional Contraint
// function, if provided.
VariableLabels ConstrainableLabels
}
// NewGauge creates a new Gauge based on the provided GaugeOpts.
//
// The returned implementation is optimized for a fast Set method. If you have a
// choice for managing the value of a Gauge via Set vs. Inc/Dec/Add/Sub, pick
// the former. For example, the Inc method of the returned Gauge is slower than
// the Inc method of a Counter returned by NewCounter. This matches the typical
// scenarios for Gauges and Counters, where the former tends to be Set-heavy and
// the latter Inc-heavy.
func NewGauge(opts GaugeOpts) Gauge {
desc := NewDesc(
BuildFQName(opts.Namespace, opts.Subsystem, opts.Name),
opts.Help,
nil,
opts.ConstLabels,
)
result := &gauge{desc: desc, labelPairs: desc.constLabelPairs}
result.init(result) // Init self-collection.
return result
}
type gauge struct {
// valBits contains the bits of the represented float64 value. It has
// to go first in the struct to guarantee alignment for atomic
// operations. http://golang.org/pkg/sync/atomic/#pkg-note-BUG
valBits uint64
selfCollector
desc *Desc
labelPairs []*dto.LabelPair
}
func (g *gauge) Desc() *Desc {
return g.desc
}
func (g *gauge) Set(val float64) {
atomic.StoreUint64(&g.valBits, math.Float64bits(val))
}
func (g *gauge) SetToCurrentTime() {
g.Set(float64(time.Now().UnixNano()) / 1e9)
}
func (g *gauge) Inc() {
g.Add(1)
}
func (g *gauge) Dec() {
g.Add(-1)
}
func (g *gauge) Add(val float64) {
for {
oldBits := atomic.LoadUint64(&g.valBits)
newBits := math.Float64bits(math.Float64frombits(oldBits) + val)
if atomic.CompareAndSwapUint64(&g.valBits, oldBits, newBits) {
return
}
}
}
func (g *gauge) Sub(val float64) {
g.Add(val * -1)
}
func (g *gauge) Write(out *dto.Metric) error {
val := math.Float64frombits(atomic.LoadUint64(&g.valBits))
return populateMetric(GaugeValue, val, g.labelPairs, nil, out)
}
// GaugeVec is a Collector that bundles a set of Gauges that all share the same
// Desc, but have different values for their variable labels. This is used if
// you want to count the same thing partitioned by various dimensions
// (e.g. number of operations queued, partitioned by user and operation
// type). Create instances with NewGaugeVec.
type GaugeVec struct {
*MetricVec
}
// NewGaugeVec creates a new GaugeVec based on the provided GaugeOpts and
// partitioned by the given label names.
func NewGaugeVec(opts GaugeOpts, labelNames []string) *GaugeVec {
return V2.NewGaugeVec(GaugeVecOpts{
GaugeOpts: opts,
VariableLabels: UnconstrainedLabels(labelNames),
})
}
// NewGaugeVec creates a new GaugeVec based on the provided GaugeVecOpts.
func (v2) NewGaugeVec(opts GaugeVecOpts) *GaugeVec {
desc := V2.NewDesc(
BuildFQName(opts.Namespace, opts.Subsystem, opts.Name),
opts.Help,
opts.VariableLabels,
opts.ConstLabels,
)
return &GaugeVec{
MetricVec: NewMetricVec(desc, func(lvs ...string) Metric {
if len(lvs) != len(desc.variableLabels.names) {
panic(makeInconsistentCardinalityError(desc.fqName, desc.variableLabels.names, lvs))
}
result := &gauge{desc: desc, labelPairs: MakeLabelPairs(desc, lvs)}
result.init(result) // Init self-collection.
return result
}),
}
}
// GetMetricWithLabelValues returns the Gauge for the given slice of label
// values (same order as the variable labels in Desc). If that combination of
// label values is accessed for the first time, a new Gauge is created.
//
// It is possible to call this method without using the returned Gauge to only
// create the new Gauge but leave it at its starting value 0. See also the
// SummaryVec example.
//
// Keeping the Gauge for later use is possible (and should be considered if
// performance is critical), but keep in mind that Reset, DeleteLabelValues and
// Delete can be used to delete the Gauge from the GaugeVec. In that case, the
// Gauge will still exist, but it will not be exported anymore, even if a
// Gauge with the same label values is created later. See also the CounterVec
// example.
//
// An error is returned if the number of label values is not the same as the
// number of variable labels in Desc (minus any curried labels).
//
// Note that for more than one label value, this method is prone to mistakes
// caused by an incorrect order of arguments. Consider GetMetricWith(Labels) as
// an alternative to avoid that type of mistake. For higher label numbers, the
// latter has a much more readable (albeit more verbose) syntax, but it comes
// with a performance overhead (for creating and processing the Labels map).
func (v *GaugeVec) GetMetricWithLabelValues(lvs ...string) (Gauge, error) {
metric, err := v.MetricVec.GetMetricWithLabelValues(lvs...)
if metric != nil {
return metric.(Gauge), err
}
return nil, err
}
// GetMetricWith returns the Gauge for the given Labels map (the label names
// must match those of the variable labels in Desc). If that label map is
// accessed for the first time, a new Gauge is created. Implications of
// creating a Gauge without using it and keeping the Gauge for later use are
// the same as for GetMetricWithLabelValues.
//
// An error is returned if the number and names of the Labels are inconsistent
// with those of the variable labels in Desc (minus any curried labels).
//
// This method is used for the same purpose as
// GetMetricWithLabelValues(...string). See there for pros and cons of the two
// methods.
func (v *GaugeVec) GetMetricWith(labels Labels) (Gauge, error) {
metric, err := v.MetricVec.GetMetricWith(labels)
if metric != nil {
return metric.(Gauge), err
}
return nil, err
}
// WithLabelValues works as GetMetricWithLabelValues, but panics where
// GetMetricWithLabelValues would have returned an error. Not returning an
// error allows shortcuts like
//
// myVec.WithLabelValues("404", "GET").Add(42)
func (v *GaugeVec) WithLabelValues(lvs ...string) Gauge {
g, err := v.GetMetricWithLabelValues(lvs...)
if err != nil {
panic(err)
}
return g
}
// With works as GetMetricWith, but panics where GetMetricWithLabels would have
// returned an error. Not returning an error allows shortcuts like
//
// myVec.With(prometheus.Labels{"code": "404", "method": "GET"}).Add(42)
func (v *GaugeVec) With(labels Labels) Gauge {
g, err := v.GetMetricWith(labels)
if err != nil {
panic(err)
}
return g
}
// CurryWith returns a vector curried with the provided labels, i.e. the
// returned vector has those labels pre-set for all labeled operations performed
// on it. The cardinality of the curried vector is reduced accordingly. The
// order of the remaining labels stays the same (just with the curried labels
// taken out of the sequence which is relevant for the
// (GetMetric)WithLabelValues methods). It is possible to curry a curried
// vector, but only with labels not yet used for currying before.
//
// The metrics contained in the GaugeVec are shared between the curried and
// uncurried vectors. They are just accessed differently. Curried and uncurried
// vectors behave identically in terms of collection. Only one must be
// registered with a given registry (usually the uncurried version). The Reset
// method deletes all metrics, even if called on a curried vector.
func (v *GaugeVec) CurryWith(labels Labels) (*GaugeVec, error) {
vec, err := v.MetricVec.CurryWith(labels)
if vec != nil {
return &GaugeVec{vec}, err
}
return nil, err
}
// MustCurryWith works as CurryWith but panics where CurryWith would have
// returned an error.
func (v *GaugeVec) MustCurryWith(labels Labels) *GaugeVec {
vec, err := v.CurryWith(labels)
if err != nil {
panic(err)
}
return vec
}
// GaugeFunc is a Gauge whose value is determined at collect time by calling a
// provided function.
//
// To create GaugeFunc instances, use NewGaugeFunc.
type GaugeFunc interface {
Metric
Collector
}
// NewGaugeFunc creates a new GaugeFunc based on the provided GaugeOpts. The
// value reported is determined by calling the given function from within the
// Write method. Take into account that metric collection may happen
// concurrently. Therefore, it must be safe to call the provided function
// concurrently.
//
// NewGaugeFunc is a good way to create an “info” style metric with a constant
// value of 1. Example:
// https://github.com/prometheus/common/blob/8558a5b7db3c84fa38b4766966059a7bd5bfa2ee/version/info.go#L36-L56
func NewGaugeFunc(opts GaugeOpts, function func() float64) GaugeFunc {
return newValueFunc(NewDesc(
BuildFQName(opts.Namespace, opts.Subsystem, opts.Name),
opts.Help,
nil,
opts.ConstLabels,
), GaugeValue, function)
}