Merge pull request #1627 from prometheus/release-1.20

Merge Release 1.20 back to main

CHANGELOG.md

@@ -1,5 +1,11 @@
 ## Unreleased
 
+* [BUGFIX] histograms: Fix possible data race when appending exemplars vs metrics gather. #1623
+
+## 1.20.3 / 2024-09-05
+
+* [BUGFIX] histograms: Fix possible data race when appending exemplars. #1608
+
 ## 1.20.2 / 2024-08-23
 
 * [BUGFIX] promhttp: Unset Content-Encoding header when data is uncompressed. #1596

prometheus/histogram.go

@@ -844,9 +844,7 @@ func (h *histogram) Write(out *dto.Metric) error {
 			}}
 		}
 
-		// If exemplars are not configured, the cap will be 0.
+		if h.nativeExemplars.isEnabled() {
-		// So append is not needed in this case.
-		if cap(h.nativeExemplars.exemplars) > 0 {
 			h.nativeExemplars.Lock()
 			his.Exemplars = append(his.Exemplars, h.nativeExemplars.exemplars...)
 			h.nativeExemplars.Unlock()
@@ -1658,10 +1656,17 @@ func addAndResetCounts(hot, cold *histogramCounts) {
 type nativeExemplars struct {
 	sync.Mutex
 
+	// Time-to-live for exemplars, it is set to -1 if exemplars are disabled, that is NativeHistogramMaxExemplars is below 0.
+	// The ttl is used on insertion to remove an exemplar that is older than ttl, if present.
 	ttl time.Duration
+
 	exemplars []*dto.Exemplar
 }
 
+func (n *nativeExemplars) isEnabled() bool {
+	return n.ttl != -1
+}
+
 func makeNativeExemplars(ttl time.Duration, maxCount int) nativeExemplars {
 	if ttl == 0 {
 		ttl = 5 * time.Minute
@@ -1673,6 +1678,7 @@ func makeNativeExemplars(ttl time.Duration, maxCount int) nativeExemplars {
 
 	if maxCount < 0 {
 		maxCount = 0
+		ttl = -1
 	}
 
 	return nativeExemplars{
@@ -1682,20 +1688,18 @@ func makeNativeExemplars(ttl time.Duration, maxCount int) nativeExemplars {
 }
 
 func (n *nativeExemplars) addExemplar(e *dto.Exemplar) {
-	if cap(n.exemplars) == 0 {
+	if !n.isEnabled() {
 		return
 	}
 
 	n.Lock()
 	defer n.Unlock()
 
-	// The index where to insert the new exemplar.
-	var nIdx int = -1
-
 	// When the number of exemplars has not yet exceeded or
 	// is equal to cap(n.exemplars), then
 	// insert the new exemplar directly.
 	if len(n.exemplars) < cap(n.exemplars) {
+		var nIdx int
 		for nIdx = 0; nIdx < len(n.exemplars); nIdx++ {
 			if *e.Value < *n.exemplars[nIdx].Value {
 				break
@@ -1705,15 +1709,44 @@ func (n *nativeExemplars) addExemplar(e *dto.Exemplar) {
 		return
 	}
 
+	if len(n.exemplars) == 1 {
+		// When the number of exemplars is 1, then
+		// replace the existing exemplar with the new exemplar.
+		n.exemplars[0] = e
+		return
+	}
+	// From this point on, the number of exemplars is greater than 1.
+
 	// When the number of exemplars exceeds the limit, remove one exemplar.
 	var (
-		rIdx int // The index where to remove the old exemplar.
+		ot    = time.Time{} // Oldest timestamp seen. Initial value doesn't matter as we replace it due to otIdx == -1 in the loop.
-
-		ot    = time.Now() // Oldest timestamp seen.
 		otIdx = -1          // Index of the exemplar with the oldest timestamp.
 
 		md = -1.0 // Logarithm of the delta of the closest pair of exemplars.
-		mdIdx = -1    // Index of the older exemplar within the closest pair.
+
+		// The insertion point of the new exemplar in the exemplars slice after insertion.
+		// This is calculated purely based on the order of the exemplars by value.
+		// nIdx == len(n.exemplars) means the new exemplar is to be inserted after the end.
+		nIdx = -1
+
+		// rIdx is ultimately the index for the exemplar that we are replacing with the new exemplar.
+		// The aim is to keep a good spread of exemplars by value and not let them bunch up too much.
+		// It is calculated in 3 steps:
+		//   1. First we set rIdx to the index of the older exemplar within the closest pair by value.
+		//      That is the following will be true (on log scale):
+		//      either the exemplar pair on index (rIdx-1, rIdx) or (rIdx, rIdx+1) will have
+		//      the closest values to each other from all pairs.
+		//      For example, suppose the values are distributed like this:
+		//        |-----------x-------------x----------------x----x-----|
+		//                                                   ^--rIdx as this is older.
+		//      Or like this:
+		//        |-----------x-------------x----------------x----x-----|
+		//                                                        ^--rIdx as this is older.
+		//   2. If there is an exemplar that expired, then we simple reset rIdx to that index.
+		//   3. We check if by inserting the new exemplar we would create a closer pair at
+		//      (nIdx-1, nIdx) or (nIdx, nIdx+1) and set rIdx to nIdx-1 or nIdx accordingly to
+		//      keep the spread of exemplars by value; otherwise we keep rIdx as it is.
+		rIdx = -1
 		cLog float64 // Logarithm of the current exemplar.
 		pLog float64 // Logarithm of the previous exemplar.
 	)
@@ -1726,7 +1759,7 @@ func (n *nativeExemplars) addExemplar(e *dto.Exemplar) {
 		}
 
 		// Find the index at which to insert new the exemplar.
-		if *e.Value <= *exemplar.Value && nIdx == -1 {
+		if nIdx == -1 && *e.Value <= *exemplar.Value {
 			nIdx = i
 		}
 
@@ -1738,11 +1771,13 @@ func (n *nativeExemplars) addExemplar(e *dto.Exemplar) {
 		}
 		diff := math.Abs(cLog - pLog)
 		if md == -1 || diff < md {
+			// The closest exemplar pair is at index: i-1, i.
+			// Choose the exemplar with the older timestamp for replacement.
 			md = diff
 			if n.exemplars[i].Timestamp.AsTime().Before(n.exemplars[i-1].Timestamp.AsTime()) {
-				mdIdx = i
+				rIdx = i
 			} else {
-				mdIdx = i - 1
+				rIdx = i - 1
 			}
 		}
 
@@ -1753,8 +1788,12 @@ func (n *nativeExemplars) addExemplar(e *dto.Exemplar) {
 	if nIdx == -1 {
 		nIdx = len(n.exemplars)
 	}
+	// Here, we have the following relationships:
+	// n.exemplars[nIdx-1].Value < e.Value (if nIdx > 0)
+	// e.Value <= n.exemplars[nIdx].Value (if nIdx < len(n.exemplars))
 
 	if otIdx != -1 && e.Timestamp.AsTime().Sub(ot) > n.ttl {
+		// If the oldest exemplar has expired, then replace it with the new exemplar.
 		rIdx = otIdx
 	} else {
 		// In the previous for loop, when calculating the closest pair of exemplars,
@@ -1764,24 +1803,27 @@ func (n *nativeExemplars) addExemplar(e *dto.Exemplar) {
 		if nIdx > 0 {
 			diff := math.Abs(elog - math.Log(n.exemplars[nIdx-1].GetValue()))
 			if diff < md {
+				// The value we are about to insert is closer to the previous exemplar at the insertion point than what we calculated before in rIdx.
+				//                                            v--rIdx
+				// |-----------x-n-----------x----------------x----x-----|
+				//     nIdx-1--^ ^--new exemplar value
+				// Do not make the spread worse, replace nIdx-1 and not rIdx.
 				md = diff
-				mdIdx = nIdx
+				rIdx = nIdx - 1
-				if n.exemplars[nIdx-1].Timestamp.AsTime().Before(e.Timestamp.AsTime()) {
-					mdIdx = nIdx - 1
-				}
 			}
 		}
 		if nIdx < len(n.exemplars) {
 			diff := math.Abs(math.Log(n.exemplars[nIdx].GetValue()) - elog)
 			if diff < md {
-				mdIdx = nIdx
+				// The value we are about to insert is closer to the next exemplar at the insertion point than what we calculated before in rIdx.
-				if n.exemplars[nIdx].Timestamp.AsTime().Before(e.Timestamp.AsTime()) {
+				//                                            v--rIdx
-					mdIdx = nIdx
+				// |-----------x-----------n-x----------------x----x-----|
+				//     new exemplar value--^ ^--nIdx
+				// Do not make the spread worse, replace nIdx-1 and not rIdx.
+				rIdx = nIdx
 			}
 		}
 	}
-		rIdx = mdIdx
-	}
 
 	// Adjust the slice according to rIdx and nIdx.
 	switch {

prometheus/histogram_test.go

@@ -1049,10 +1049,14 @@ func TestNativeHistogramConcurrency(t *testing.T) {
 
 			go func(vals []float64) {
 				start.Wait()
-				for _, v := range vals {
+				for i, v := range vals {
 					// An observation every 1 to 10 seconds.
 					atomic.AddInt64(&ts, rand.Int63n(10)+1)
+					if i%2 == 0 {
 						his.Observe(v)
+					} else {
+						his.(ExemplarObserver).ObserveWithExemplar(v, Labels{"foo": "bar"})
+					}
 				}
 				end.Done()
 			}(vals)