client_golang/prometheus/promhttp/http.go

268 lines
9.9 KiB
Go
Raw Normal View History

// Copyright 2016 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// Package promhttp provides tooling around HTTP servers and clients.
//
// First, the package allows the creation of http.Handler instances to expose
// Prometheus metrics via HTTP. promhttp.Handler acts on the
// prometheus.DefaultGatherer. With HandlerFor, you can create a handler for a
// custom registry or anything that implements the Gatherer interface. It also
// allows the creation of handlers that act differently on errors or allow to
// log errors.
//
// Second, the package provides tooling to instrument instances of http.Handler
// via middleware. Middleware wrappers follow the naming scheme
// InstrumentHandlerX, where X describes the intended use of the middleware.
// See each function's doc comment for specific details.
//
// Finally, the package allows for an http.RoundTripper to be instrumented via
// middleware. Middleware wrappers follow the naming scheme
// InstrumentRoundTripperX, where X describes the intended use of the
// middleware. See each function's doc comment for specific details.
package promhttp
import (
"bytes"
"compress/gzip"
"fmt"
"io"
"net/http"
"strings"
"sync"
"github.com/prometheus/common/expfmt"
"github.com/prometheus/client_golang/prometheus"
)
const (
contentTypeHeader = "Content-Type"
contentLengthHeader = "Content-Length"
contentEncodingHeader = "Content-Encoding"
acceptEncodingHeader = "Accept-Encoding"
)
var bufPool sync.Pool
func getBuf() *bytes.Buffer {
buf := bufPool.Get()
if buf == nil {
return &bytes.Buffer{}
}
return buf.(*bytes.Buffer)
}
func giveBuf(buf *bytes.Buffer) {
buf.Reset()
bufPool.Put(buf)
}
// Handler returns an http.Handler for the prometheus.DefaultGatherer, using
// default HandlerOpts, i.e. it reports the first error as an HTTP error, it has
// no error logging, and it applies compression if requested by the client.
//
// The returned http.Handler is already instrumented using the
// InstrumentMetricHandler function and the prometheus.DefaultRegisterer. If you
// create multiple http.Handlers by separate calls of the Handler function, the
// metrics used for instrumentation will be shared between them, providing
// global scrape counts.
//
// This function is meant to cover the bulk of basic use cases. If you are doing
// anything that requires more customization (including using a non-default
// Gatherer, different instrumentation, and non-default HandlerOpts), use the
// HandlerFor function. See there for details.
func Handler() http.Handler {
return InstrumentMetricHandler(
prometheus.DefaultRegisterer, HandlerFor(prometheus.DefaultGatherer, HandlerOpts{}),
)
}
// HandlerFor returns an uninstrumented http.Handler for the provided
// Gatherer. The behavior of the Handler is defined by the provided
// HandlerOpts. Thus, HandlerFor is useful to create http.Handlers for custom
// Gatherers, with non-default HandlerOpts, and/or with custom (or no)
// instrumentation. Use the InstrumentMetricHandler function to apply the same
// kind of instrumentation as it is used by the Handler function.
2016-08-04 16:26:27 +03:00
func HandlerFor(reg prometheus.Gatherer, opts HandlerOpts) http.Handler {
return http.HandlerFunc(func(w http.ResponseWriter, req *http.Request) {
2016-08-04 16:26:27 +03:00
mfs, err := reg.Gather()
if err != nil {
if opts.ErrorLog != nil {
opts.ErrorLog.Println("error gathering metrics:", err)
}
switch opts.ErrorHandling {
case PanicOnError:
panic(err)
case ContinueOnError:
if len(mfs) == 0 {
http.Error(w, "No metrics gathered, last error:\n\n"+err.Error(), http.StatusInternalServerError)
return
}
case HTTPErrorOnError:
http.Error(w, "An error has occurred during metrics gathering:\n\n"+err.Error(), http.StatusInternalServerError)
return
}
}
contentType := expfmt.Negotiate(req.Header)
buf := getBuf()
defer giveBuf(buf)
writer, encoding := decorateWriter(req, buf, opts.DisableCompression)
enc := expfmt.NewEncoder(writer, contentType)
var lastErr error
for _, mf := range mfs {
if err := enc.Encode(mf); err != nil {
lastErr = err
if opts.ErrorLog != nil {
opts.ErrorLog.Println("error encoding metric family:", err)
}
switch opts.ErrorHandling {
case PanicOnError:
panic(err)
case ContinueOnError:
// Handled later.
case HTTPErrorOnError:
http.Error(w, "An error has occurred during metrics encoding:\n\n"+err.Error(), http.StatusInternalServerError)
return
}
}
}
if closer, ok := writer.(io.Closer); ok {
closer.Close()
}
if lastErr != nil && buf.Len() == 0 {
http.Error(w, "No metrics encoded, last error:\n\n"+lastErr.Error(), http.StatusInternalServerError)
return
}
header := w.Header()
header.Set(contentTypeHeader, string(contentType))
header.Set(contentLengthHeader, fmt.Sprint(buf.Len()))
if encoding != "" {
header.Set(contentEncodingHeader, encoding)
}
w.Write(buf.Bytes())
// TODO(beorn7): Consider streaming serving of metrics.
})
}
// InstrumentMetricHandler is usually used with an http.Handler returned by the
// HandlerFor function. It instruments the provided http.Handler with two
// metrics: A counter vector "promhttp_metric_handler_requests_total" to count
// scrapes partitioned by HTTP status code, and a gauge
// "promhttp_metric_handler_requests_in_flight" to track the number of
// simultaneous scrapes. This function idempotently registers collectors for
// both metrics with the provided Registerer. It panics if the registration
// fails. The provided metrics are useful to see how many scrapes hit the
// monitored target (which could be from different Prometheus servers or other
// scrapers), and how often they overlap (which would result in more than one
// scrape in flight at the same time). Note that the scrapes-in-flight gauge
// will contain the scrape by which it is exposed, while the scrape counter will
// only get incremented after the scrape is complete (as only then the status
// code is known). For tracking scrape durations, use the
// "scrape_duration_seconds" gauge created by the Prometheus server upon each
// scrape.
func InstrumentMetricHandler(reg prometheus.Registerer, handler http.Handler) http.Handler {
cnt := prometheus.NewCounterVec(
prometheus.CounterOpts{
Name: "promhttp_metric_handler_requests_total",
Help: "Total number of scrapes by HTTP status code.",
},
[]string{"code"},
)
// Initialize the most likely HTTP status codes.
cnt.WithLabelValues("200")
cnt.WithLabelValues("500")
if err := reg.Register(cnt); err != nil {
if are, ok := err.(prometheus.AlreadyRegisteredError); ok {
cnt = are.ExistingCollector.(*prometheus.CounterVec)
} else {
panic(err)
}
}
gge := prometheus.NewGauge(prometheus.GaugeOpts{
Name: "promhttp_metric_handler_requests_in_flight",
Help: "Current number of scrapes being served.",
})
if err := reg.Register(gge); err != nil {
if are, ok := err.(prometheus.AlreadyRegisteredError); ok {
gge = are.ExistingCollector.(prometheus.Gauge)
} else {
panic(err)
}
}
return InstrumentHandlerCounter(cnt, InstrumentHandlerInFlight(gge, handler))
}
// HandlerErrorHandling defines how a Handler serving metrics will handle
// errors.
type HandlerErrorHandling int
// These constants cause handlers serving metrics to behave as described if
// errors are encountered.
const (
// Serve an HTTP status code 500 upon the first error
// encountered. Report the error message in the body.
HTTPErrorOnError HandlerErrorHandling = iota
// Ignore errors and try to serve as many metrics as possible. However,
// if no metrics can be served, serve an HTTP status code 500 and the
// last error message in the body. Only use this in deliberate "best
// effort" metrics collection scenarios. It is recommended to at least
// log errors (by providing an ErrorLog in HandlerOpts) to not mask
// errors completely.
ContinueOnError
// Panic upon the first error encountered (useful for "crash only" apps).
PanicOnError
)
// Logger is the minimal interface HandlerOpts needs for logging. Note that
// log.Logger from the standard library implements this interface, and it is
// easy to implement by custom loggers, if they don't do so already anyway.
type Logger interface {
Println(v ...interface{})
}
// HandlerOpts specifies options how to serve metrics via an http.Handler. The
// zero value of HandlerOpts is a reasonable default.
type HandlerOpts struct {
// ErrorLog specifies an optional logger for errors collecting and
// serving metrics. If nil, errors are not logged at all.
ErrorLog Logger
// ErrorHandling defines how errors are handled. Note that errors are
// logged regardless of the configured ErrorHandling provided ErrorLog
// is not nil.
ErrorHandling HandlerErrorHandling
// If DisableCompression is true, the handler will never compress the
// response, even if requested by the client.
DisableCompression bool
}
// decorateWriter wraps a writer to handle gzip compression if requested. It
// returns the decorated writer and the appropriate "Content-Encoding" header
// (which is empty if no compression is enabled).
func decorateWriter(request *http.Request, writer io.Writer, compressionDisabled bool) (io.Writer, string) {
if compressionDisabled {
return writer, ""
}
header := request.Header.Get(acceptEncodingHeader)
parts := strings.Split(header, ",")
for _, part := range parts {
part := strings.TrimSpace(part)
if part == "gzip" || strings.HasPrefix(part, "gzip;") {
return gzip.NewWriter(writer), "gzip"
}
}
return writer, ""
}