e0039da2e4
cmd/revid-cli & revid: moved ringBuffer to earlier in pipeline
...
Removed packetization flag for revid-cli as no longer required.
Packetization will be decided based on outputs.
Removed buffer type definition and Write receiver func in
mtsSender_test.go as this is now defined in revid.go.
Made ringbuffer size and element size consisten no matter the
output methods, as we're now going to only be putting h264 in there.
Modified H264 lex function to take an io.Writer rather than an
Encoder.
Removed destination []loadSender slice from revids fields and
added an encoder []stream.Encoder slice to hold encoders used
during a particular configuration. Each encoder will write to
the desired outputs.
Modified logic regarding encoder and sender setup. We now check
what outputs we have and add encoders to revid's encoder slice
depending on what each output requires.
Modified outputClips routine such that it ranges through revid's
encoders and encodes to them. They then write to the senders and
they handle logic regarding the amount of data they send out
and when. They also handle actions to perform on send failures.
Wrote multiSender struct which will be written to from encoders.
It will then use it's senders to distribute the data accordingly
to senders that work with the encoding from said encoders.
Modified senders so that their load methods no longer take ring
chunks, but rather slices.
Modified senders such that their release methods no longer
perform chunk closing.
2019-03-09 15:28:07 +10:30
d5af370d71
cmd/revid-cli: corrected value assignment for an undefined pin when revid is not yet initialised
2019-03-02 20:46:12 +10:30
562c8effc3
cmd/revid-cli: adjusted logging levels to make more appropriate
2019-03-02 15:23:33 +10:30
01474ee870
cmd/revid-cli: made general changes to make revi-cli more robust i.e. not so trigger happy with fatals
2019-03-02 14:54:49 +10:30
9d1d2914a4
cmd/revid-cli: removing fatal error if we get an error during run()
2019-03-02 13:46:43 +10:30
3c273adf4c
cmd/revid-cli: not expecting error from revid.Stop() in revid-cli anymore:
2019-03-02 13:30:46 +10:30
b9bccaabdd
cmd/revid-cli: fixed default value for log verbosity flag
2019-02-28 16:53:06 +10:30
589d922ddb
cmd/revid-cli: verbosity flag default to Info
2019-02-28 14:12:44 +10:30
b6a3e062b5
Merged in path-flag-fix (pull request #143 )
...
revid: got rid of OutputFileName and InputFileName
2019-02-28 03:04:05 +00:00
4cfb85b8e1
Merged in fix-verbosity-flag (pull request #144 )
...
cmd/revid-cli: initialisation of logger actually usses what was given as revid-cli verbosity flag input
2019-02-28 03:03:13 +00:00
c247e63bd0
Merged in default-mode-crash-fix (pull request #150 )
...
revid-cli: initialising config.Output slice when no outputs are defined so that a default output can still be set
Approved-by: Alan Noble <anoble@gmail.com>
2019-02-25 06:42:38 +00:00
95303b4e71
Set default log level to Info (to match the comment).
2019-02-25 06:31:12 +00:00
37850e8350
revid-cli: initialising config.Output slice when no outputs are defined so that a default output can still be set
2019-02-25 12:59:57 +10:30
c3743174da
cmd/revid-cli: initialisation of logger actually usses what was given as revid-cli verbosity flag input
2019-02-12 18:37:15 +10:30
3ee2683ca9
cmd/revid-cli & revid: outputFileNamePtr => outputPathPtr, config.OutputFileName=>config.OutputPath, inputFileNamePtr=>inputPathPtr and finally, config.InputFileName=>config.InputPath
2019-02-12 18:22:46 +10:30
2a61f2d08d
cmd/revid-cli: added space before rv declaration
2019-02-12 11:37:50 +10:30
e2d80b423c
cmd/revid-cli: removed comment we don't need anymore
2019-02-12 11:33:48 +10:30
69029889fe
cmd/revid-cli: using closure for readPin func so that we don't have to have global revid
2019-02-12 11:32:02 +10:30
b9c53791d8
cmd/revid-cli: updated readPin func comment
2019-02-12 10:42:26 +10:30
4e1c8e7c45
cmd/revid-cli: made Revid global so that revid.Bitrate() can be accessed in readPin
2019-02-12 10:39:23 +10:30
f67fb1ec8a
cmd/revid-cli: replaced use of send() with netsender.Run() and implemented readPin func.
2019-02-11 16:49:28 +10:30
5090056972
cmd/revid-cli: send-retry cmd line flag is now retry
2019-02-08 18:19:44 +10:30
c5d93b53d5
Merge branch 'master' into send-retry-flag
2019-02-08 18:18:01 +10:30
8bdfed9960
stream/mts: fixing conflicts
2019-02-08 10:13:51 +10:30
e2bbc84c1e
cmd/revid-cli: using const strings for copyright metadata preamble
2019-02-07 08:25:37 +10:30
2b7ab27763
cmd/revid-cli & stream/mts/meta: added meta.NewWith function that creates a new meta.Data and adds an initial entry. Using meta.NewWith in revid-cli to initialise mts' global meta.Data with some preamble data.
2019-02-06 10:19:12 +10:30
ea8572a777
cmd/revid-cli: catching error in conversion of mp
2019-02-05 10:45:15 +10:30
4dcbd90449
cmd/revid-cli: removed another closed scope condition
2019-02-05 10:40:08 +10:30
35344402b8
cmd/revid-cli/main.go: not using closed scope conditions anymore
2019-02-05 10:32:16 +10:30
bd2958ba4e
cmd/revid-cli & revid: added TODO for the use of Run() instead of send in cmd/revid-cli/main.go. Fixed filename in revid/revid.go file header. Renamed ret to cfg in revid.Config(). Catching error from call to revid.Stop() in revid.Udate()
2019-02-04 19:14:02 +10:30
1cdbfa2c66
cmd/revid-cli: setting mode to paused if ns is in burst mode.
2019-02-04 17:14:19 +10:30
8978f9edc5
cmd/revid-cli & revid: using goto to sleep for monitor period, and using wg.Done() at the end of output routine.
2019-02-04 17:12:30 +10:30
93e3899725
cmd/revid-cli: using ns.Send() rather than ns.Run() to poll
2019-02-04 17:04:49 +10:30
ee7eb84d26
revid-cli: correctly using ns.Mode() and ns.SetMode()
2019-02-04 13:25:37 +10:30
1010721dd0
cmd/revid-cli & revid: Checking revid mode differently - now using ns.Mode(), which should soon be an available feature. Also now using ns.SetMode() - which tells netreceiver that we've changed mode.
2019-02-03 23:37:38 +10:30
1af4b25030
cmd/revid-cli & revid: removed startRevid and stopRevid as shouldn't be required when we have revid.Start() and revid.Stop(). Created revid.Config() which returns copy of config safely using mutex. removed updateRevid in revid-cli and move to fun revid.Update() - as there's no reason why it can't just be a receiver func - even better considering we want to start moving alot of stuff from revid-cli to the revid-api anyways.
2019-02-03 21:17:44 +10:30
5637d2b015
revid-cli: added sendRetry flag so that we can have the option to either keep sending on failure, or just drop data.
2019-01-22 15:53:41 +10:30
92ba9c89a2
cmd/revid-cli,revid: use a slice for output destination flags
2019-01-19 20:01:42 +10:30
35d63f664f
revid: add v4l properties and fix default device handling
...
Also fix logging typos found during work.
2019-01-17 17:04:59 +10:30
ef6811d3b8
Merged in webcam (pull request #86 )
...
revid: addition of webcam input
Approved-by: kortschak <dan@kortschak.io>
2019-01-16 07:12:30 +00:00
ae792ac11e
revid-cli: capturing errors from calls to stopRevid
2019-01-13 22:15:30 +10:30
19ae6f1ca6
revid-cli: dealing with errors in revid-cli from start and stop if they occur
2019-01-13 22:04:50 +10:30
07307ed492
updating webcam branch
...
Merge branch 'master' into webcam
2019-01-13 19:29:32 +10:30
b46e267983
cmd/revid-cli: use sensible default for encoding option
2019-01-05 10:33:32 +10:30
04a76e424a
Added LogPath and ConfigFile command line flags.
2019-01-05 08:48:47 +10:30
d4e0fb516b
Fixing smartlogger errors
...
Merge branch 'master' into webcam
2019-01-03 10:35:29 +10:30
a4c73cf6c5
av: updated logging to suit changes made on iot and utils
2019-01-02 15:39:47 +10:30
7f707288eb
revid-cli: webcam to Webcam in revid-cli flag interpretation switch
2018-12-29 17:01:50 +10:30
1e3b4b1ab8
cmd/revid-cli,revid: reduce stringly typing in config/flags
2018-12-28 13:43:21 +10:30
7118f1566c
revid: added input flag for webcam input and added func to handle webcam input using ffmpeg
2018-12-28 10:44:53 +10:30
Saxon