Commit Graph

140 Commits

Author SHA1 Message Date
Saxon 93e856792d cmd/revid-cli & revid: fixed conflict 2019-03-09 15:54:52 +10:30
Saxon e0039da2e4 cmd/revid-cli & revid: moved ringBuffer to earlier in pipeline
Removed packetization flag for revid-cli as no longer required.
Packetization will be decided based on outputs.
Removed buffer type definition and Write receiver func in
mtsSender_test.go as this is now defined in revid.go.
Made ringbuffer size and element size consisten no matter the
output methods, as we're now going to only be putting h264 in there.
Modified H264 lex function to take an io.Writer rather than an
Encoder.
Removed destination []loadSender slice from revids fields and
added an encoder []stream.Encoder slice to hold encoders used
during a particular configuration. Each encoder will write to
the desired outputs.
Modified logic regarding encoder and sender setup. We now check
what outputs we have and add encoders to revid's encoder slice
depending on what each output requires.
Modified outputClips routine such that it ranges through revid's
encoders and encodes to them. They then write to the senders and
they handle logic regarding the amount of data they send out
and when. They also handle actions to perform on send failures.
Wrote multiSender struct which will be written to from encoders.
It will then use it's senders to distribute the data accordingly
to senders that work with the encoding from said encoders.
Modified senders so that their load methods no longer take ring
chunks, but rather slices.
Modified senders such that their release methods no longer
perform chunk closing.
2019-03-09 15:28:07 +10:30
Saxon Milton cfb4946588 Merged in video-rotate (pull request )
Video rotate

Approved-by: Alan Noble <anoble@gmail.com>
2019-03-08 23:33:40 +00:00
Saxon 3a9e90dcf8 cmd/revid-cli & revid: added back vertical and horizontal flip options 2019-03-06 11:51:55 +10:30
Saxon cfcb899bcb revid & cmd/revid-cli: rotate => rotation 2019-03-04 12:11:34 +10:30
Saxon 2d229077a2 revid & cmd/revid-cli: removed any mention of horizontal and vertical flip and replaced with rotate 2019-03-04 12:07:28 +10:30
Saxon d7863863c7 cmd/revid-cli: structuring flags by type, and added a Rotate flag so that video can be rotated using raspivid rotate flag. 2019-03-04 11:53:28 +10:30
Alan Noble 313944de90 Made more idiomatic. 2019-03-03 23:22:42 +00:00
Alan Noble 1c9dde3798 Don't call rv.Bitrate when rv is nil. 2019-03-03 23:04:49 +00:00
Saxon d5af370d71 cmd/revid-cli: corrected value assignment for an undefined pin when revid is not yet initialised 2019-03-02 20:46:12 +10:30
Saxon 562c8effc3 cmd/revid-cli: adjusted logging levels to make more appropriate 2019-03-02 15:23:33 +10:30
Saxon 01474ee870 cmd/revid-cli: made general changes to make revi-cli more robust i.e. not so trigger happy with fatals 2019-03-02 14:54:49 +10:30
Saxon 9d1d2914a4 cmd/revid-cli: removing fatal error if we get an error during run() 2019-03-02 13:46:43 +10:30
Saxon 3c273adf4c cmd/revid-cli: not expecting error from revid.Stop() in revid-cli anymore: 2019-03-02 13:30:46 +10:30
Saxon b9bccaabdd cmd/revid-cli: fixed default value for log verbosity flag 2019-02-28 16:53:06 +10:30
Saxon 589d922ddb cmd/revid-cli: verbosity flag default to Info 2019-02-28 14:12:44 +10:30
Saxon Milton b6a3e062b5 Merged in path-flag-fix (pull request )
revid: got rid of OutputFileName and InputFileName
2019-02-28 03:04:05 +00:00
Saxon Milton 4cfb85b8e1 Merged in fix-verbosity-flag (pull request )
cmd/revid-cli: initialisation of logger actually usses what was given as revid-cli verbosity flag input
2019-02-28 03:03:13 +00:00
Saxon Milton c247e63bd0 Merged in default-mode-crash-fix (pull request )
revid-cli: initialising config.Output slice when no outputs are defined so that a default output can still be set

Approved-by: Alan Noble <anoble@gmail.com>
2019-02-25 06:42:38 +00:00
Alan Noble 95303b4e71 Set default log level to Info (to match the comment). 2019-02-25 06:31:12 +00:00
Saxon 37850e8350 revid-cli: initialising config.Output slice when no outputs are defined so that a default output can still be set 2019-02-25 12:59:57 +10:30
saxon c3743174da cmd/revid-cli: initialisation of logger actually usses what was given as revid-cli verbosity flag input 2019-02-12 18:37:15 +10:30
saxon 3ee2683ca9 cmd/revid-cli & revid: outputFileNamePtr => outputPathPtr, config.OutputFileName=>config.OutputPath, inputFileNamePtr=>inputPathPtr and finally, config.InputFileName=>config.InputPath 2019-02-12 18:22:46 +10:30
saxon 2a61f2d08d cmd/revid-cli: added space before rv declaration 2019-02-12 11:37:50 +10:30
saxon e2d80b423c cmd/revid-cli: removed comment we don't need anymore 2019-02-12 11:33:48 +10:30
saxon 69029889fe cmd/revid-cli: using closure for readPin func so that we don't have to have global revid 2019-02-12 11:32:02 +10:30
saxon b9c53791d8 cmd/revid-cli: updated readPin func comment 2019-02-12 10:42:26 +10:30
saxon 4e1c8e7c45 cmd/revid-cli: made Revid global so that revid.Bitrate() can be accessed in readPin 2019-02-12 10:39:23 +10:30
saxon f67fb1ec8a cmd/revid-cli: replaced use of send() with netsender.Run() and implemented readPin func. 2019-02-11 16:49:28 +10:30
saxon 5090056972 cmd/revid-cli: send-retry cmd line flag is now retry 2019-02-08 18:19:44 +10:30
saxon c5d93b53d5 Merge branch 'master' into send-retry-flag 2019-02-08 18:18:01 +10:30
saxon 8bdfed9960 stream/mts: fixing conflicts 2019-02-08 10:13:51 +10:30
saxon e2bbc84c1e cmd/revid-cli: using const strings for copyright metadata preamble 2019-02-07 08:25:37 +10:30
saxon 2b7ab27763 cmd/revid-cli & stream/mts/meta: added meta.NewWith function that creates a new meta.Data and adds an initial entry. Using meta.NewWith in revid-cli to initialise mts' global meta.Data with some preamble data. 2019-02-06 10:19:12 +10:30
saxon ea8572a777 cmd/revid-cli: catching error in conversion of mp 2019-02-05 10:45:15 +10:30
saxon 4dcbd90449 cmd/revid-cli: removed another closed scope condition 2019-02-05 10:40:08 +10:30
saxon 35344402b8 cmd/revid-cli/main.go: not using closed scope conditions anymore 2019-02-05 10:32:16 +10:30
saxon bd2958ba4e cmd/revid-cli & revid: added TODO for the use of Run() instead of send in cmd/revid-cli/main.go. Fixed filename in revid/revid.go file header. Renamed ret to cfg in revid.Config(). Catching error from call to revid.Stop() in revid.Udate() 2019-02-04 19:14:02 +10:30
saxon 1cdbfa2c66 cmd/revid-cli: setting mode to paused if ns is in burst mode. 2019-02-04 17:14:19 +10:30
saxon 8978f9edc5 cmd/revid-cli & revid: using goto to sleep for monitor period, and using wg.Done() at the end of output routine. 2019-02-04 17:12:30 +10:30
saxon 93e3899725 cmd/revid-cli: using ns.Send() rather than ns.Run() to poll 2019-02-04 17:04:49 +10:30
saxon ee7eb84d26 revid-cli: correctly using ns.Mode() and ns.SetMode() 2019-02-04 13:25:37 +10:30
saxon 1010721dd0 cmd/revid-cli & revid: Checking revid mode differently - now using ns.Mode(), which should soon be an available feature. Also now using ns.SetMode() - which tells netreceiver that we've changed mode. 2019-02-03 23:37:38 +10:30
saxon 1af4b25030 cmd/revid-cli & revid: removed startRevid and stopRevid as shouldn't be required when we have revid.Start() and revid.Stop(). Created revid.Config() which returns copy of config safely using mutex. removed updateRevid in revid-cli and move to fun revid.Update() - as there's no reason why it can't just be a receiver func - even better considering we want to start moving alot of stuff from revid-cli to the revid-api anyways. 2019-02-03 21:17:44 +10:30
saxon 5637d2b015 revid-cli: added sendRetry flag so that we can have the option to either keep sending on failure, or just drop data. 2019-01-22 15:53:41 +10:30
Dan Kortschak 92ba9c89a2 cmd/revid-cli,revid: use a slice for output destination flags 2019-01-19 20:01:42 +10:30
Dan Kortschak 35d63f664f revid: add v4l properties and fix default device handling
Also fix logging typos found during work.
2019-01-17 17:04:59 +10:30
Saxon Milton ef6811d3b8 Merged in webcam (pull request )
revid: addition of webcam input

Approved-by: kortschak <dan@kortschak.io>
2019-01-16 07:12:30 +00:00
saxon ae792ac11e revid-cli: capturing errors from calls to stopRevid 2019-01-13 22:15:30 +10:30
saxon 19ae6f1ca6 revid-cli: dealing with errors in revid-cli from start and stop if they occur 2019-01-13 22:04:50 +10:30