Saxon
e0039da2e4
cmd/revid-cli & revid: moved ringBuffer to earlier in pipeline
...
Removed packetization flag for revid-cli as no longer required.
Packetization will be decided based on outputs.
Removed buffer type definition and Write receiver func in
mtsSender_test.go as this is now defined in revid.go.
Made ringbuffer size and element size consisten no matter the
output methods, as we're now going to only be putting h264 in there.
Modified H264 lex function to take an io.Writer rather than an
Encoder.
Removed destination []loadSender slice from revids fields and
added an encoder []stream.Encoder slice to hold encoders used
during a particular configuration. Each encoder will write to
the desired outputs.
Modified logic regarding encoder and sender setup. We now check
what outputs we have and add encoders to revid's encoder slice
depending on what each output requires.
Modified outputClips routine such that it ranges through revid's
encoders and encodes to them. They then write to the senders and
they handle logic regarding the amount of data they send out
and when. They also handle actions to perform on send failures.
Wrote multiSender struct which will be written to from encoders.
It will then use it's senders to distribute the data accordingly
to senders that work with the encoding from said encoders.
Modified senders so that their load methods no longer take ring
chunks, but rather slices.
Modified senders such that their release methods no longer
perform chunk closing.
2019-03-09 15:28:07 +10:30
Saxon Milton
cfb4946588
Merged in video-rotate (pull request #158 )
...
Video rotate
Approved-by: Alan Noble <anoble@gmail.com>
2019-03-08 23:33:40 +00:00
Alan Noble
71e993255b
Merged in revid-bitrate-fix (pull request #157 )
...
Don't call rv.Bitrate when rv is nil.
Approved-by: Saxon Milton <saxon.milton@gmail.com>
Approved-by: Alan Noble <anoble@gmail.com>
2019-03-08 23:01:59 +00:00
scruzin
437470b53f
Only dump stack for Fatal log messages.
2019-03-09 06:57:55 +10:30
scruzin
db265404eb
Skip if raspivid not present.
2019-03-08 20:43:01 +10:30
scruzin
e0471d5e2c
Initial revision.
2019-03-08 17:45:38 +10:30
scruzin
aced40b5bd
Merge branch 'master' of https://bitbucket.org/ausocean/av
2019-03-08 16:59:23 +10:30
Saxon Milton
02db78cac7
Merged in remove-udp-sender (pull request #165 )
...
revid: removed udp sender and anything pertainent to it
2019-03-07 09:51:46 +00:00
Saxon
0962b1047d
revid: removed udp sender and anything pertainent to it
2019-03-07 20:14:50 +10:30
Saxon Milton
ddc7ad4325
Merged in remove-ffmpeg-sender (pull request #164 )
...
revid: remove ffmpegSender and any code pertaining to it.
2019-03-07 08:49:18 +00:00
Saxon
6fa9f37972
revid: remove ffmpegSender and any code pertaining to it.
2019-03-07 19:15:39 +10:30
Alan Noble
3a112da000
Merged in pass-vars-to-make (pull request #161 )
...
Pass vars to make
Approved-by: Saxon Milton <saxon.milton@gmail.com>
Approved-by: Alan Noble <anoble@gmail.com>
2019-03-06 20:05:39 +00:00
Dan Kortschak
c7ace29526
circleci: update go version and use modules
2019-03-06 18:10:07 +10:30
Dan Kortschak
79cc7b3338
module: add go.mod and go.sum for working build
2019-03-06 12:33:55 +10:30
Saxon Milton
a7ae1aa643
revid: fixed raspivid flag usage for vertical and horizontal flipping - tested and working
2019-03-06 01:38:13 +00:00
Saxon
3a9e90dcf8
cmd/revid-cli & revid: added back vertical and horizontal flip options
2019-03-06 11:51:55 +10:30
Alan Noble
9df652b57b
Remove superflous characters.
2019-03-06 00:00:42 +00:00
Alan Noble
23f44b4655
Default dk to zero.
2019-03-05 23:53:42 +00:00
Alan Noble
1df780fae1
Removed.
2019-03-05 23:45:40 +00:00
Alan Noble
fcbeea6695
Optionally supply MA and DK and create a dhcpcd.enter-hook.
2019-03-05 23:45:06 +00:00
Saxon Milton
768ea3a007
Merged in csv-output-var (pull request #160 )
...
revid: handling csv output var in revid's update function
Approved-by: Alan Noble <anoble@gmail.com>
2019-03-05 06:44:27 +00:00
Saxon Milton
5280f037ca
Merged in mts-chunking (pull request #146 )
...
Mts chunking
Approved-by: kortschak <dan@kortschak.io>
2019-03-05 06:15:03 +00:00
Saxon
79d0dad757
revid: checking for changes to rtp address in vars now
2019-03-05 16:38:32 +10:30
scruzin
53934ebb8c
Merge branch 'master' of https://bitbucket.org/ausocean/av
2019-03-05 14:28:06 +10:30
Saxon
003808858b
revid: handling csv output var in revid's update function
2019-03-05 10:50:31 +10:30
Saxon Milton
300b55548b
Merged in config-messages (pull request #159 )
...
revid: config defaulting messages no longer warning level but rather info level
Approved-by: Alan Noble <anoble@gmail.com>
2019-03-04 20:54:23 +00:00
Saxon
d9ca76159e
Merge branch 'master' into mts-chunking
2019-03-04 15:01:41 +10:30
Saxon
e06465e46b
revid: config defaulting messages no longer warning level but rather info level
2019-03-04 12:47:57 +10:30
Saxon Milton
0767f41d4a
revid: corrected spelling error in netreceiver var check
2019-03-04 01:52:39 +00:00
Saxon
cfcb899bcb
revid & cmd/revid-cli: rotate => rotation
2019-03-04 12:11:34 +10:30
Saxon
2d229077a2
revid & cmd/revid-cli: removed any mention of horizontal and vertical flip and replaced with rotate
2019-03-04 12:07:28 +10:30
Saxon
d7863863c7
cmd/revid-cli: structuring flags by type, and added a Rotate flag so that video can be rotated using raspivid rotate flag.
2019-03-04 11:53:28 +10:30
Alan Noble
313944de90
Made more idiomatic.
2019-03-03 23:22:42 +00:00
Alan Noble
1c9dde3798
Don't call rv.Bitrate when rv is nil.
2019-03-03 23:04:49 +00:00
Saxon Milton
05c2c77f31
Merged in start-in-paused-state (pull request #155 )
...
Start in paused state and more robustness
Approved-by: Alan Noble <anoble@gmail.com>
Approved-by: kortschak <dan@kortschak.io>
2019-03-03 20:21:34 +00:00
Saxon
8606320731
revid: ignoring rtmp.ErrInvalidFlvTag error and checking that rtmp conn is not closed before we try to close it
2019-03-03 18:24:54 +10:30
Saxon
9c59c5b9d3
Merge branch 'master' into start-in-paused-state
2019-03-03 17:44:32 +10:30
Alan Noble
6c39be24c9
Merged in revid/fix-close-calls (pull request #156 )
...
Don't fail if Close() returns an error, since it just means there is no connection, and don't call Close when Dial fails.
Approved-by: Saxon Milton <saxon.milton@gmail.com>
Approved-by: Alan Noble <anoble@gmail.com>
2019-03-03 07:12:08 +00:00
Alan Noble
b1dcb9d6a7
gofmt
2019-03-03 07:11:35 +00:00
Alan Noble
32280cb9d6
Declare error.
2019-03-03 07:09:50 +00:00
Alan Noble
c15c57f15f
Don't fail if Close() returns an error, since it just means there is no connection, and don't call Close when Dial fails.
2019-03-03 07:04:33 +00:00
Saxon
03f83032a5
revid: ignore error from close in rtmpSender.Restart()
2019-03-03 17:17:25 +10:30
Saxon
c60ec9fbd8
revid: moved messaged regarding restart of rtmp session
2019-03-03 16:41:16 +10:30
Saxon
b92466bab8
revid: defaulting to sendRetry on for Rtmp output
2019-03-03 16:38:03 +10:30
Saxon
b5954d3f53
revid: if start not successfull stop is called to stop output clips routine
2019-03-03 13:46:02 +10:30
Saxon
cb206ff92b
revid: adjust ringBuffer element size for flv
2019-03-03 13:35:25 +10:30
Saxon
ab97bcb6d1
Merge branch 'master' into start-in-paused-state
2019-03-03 13:25:56 +10:30
Alan Noble
36182d7e6d
Make pi the owner of netsender.conf and install syncreboot.
2019-03-02 11:40:54 +00:00
Saxon
d5af370d71
cmd/revid-cli: corrected value assignment for an undefined pin when revid is not yet initialised
2019-03-02 20:46:12 +10:30
Saxon
bd3f89978e
revid/mtsSender_test.go: updated comment for buffer.Write()
2019-03-02 20:41:58 +10:30