revid,ring: plumb in ring buffer with WriteTo

There is a residual scar of an intermediate []byte copy because of the
signature of http.NewRequest, but this can be addressed later. The rtmp
interface needed alteration so that rtmp.Session satisfies io.Writer.

revid/Revid.go

@@ -115,7 +115,7 @@ type revid struct {
 	setupInput     func() error
 	setupOutput    func() error
 	getFrame       func() []byte
-	sendClip       func(clip []byte) error
+	sendClip       func(*ring.Chunk) error
 	rtmpInst       rtmp.Session
 	mutex          sync.Mutex
 	sendMutex      sync.Mutex
@@ -163,8 +163,8 @@ func (r *revid) changeState(config Config) error {
 
 	switch r.config.Output {
 	case File:
-		r.sendClip = r.sendClipToFile
 		r.setupOutput = r.setupOutputForFile
+		r.sendClip = r.sendClipToFile
 	case FfmpegRtmp:
 		r.setupOutput = r.setupOutputForFfmpegRtmp
 		r.sendClip = r.sendClipToFfmpegRtmp
@@ -395,7 +395,7 @@ func (r *revid) outputClips() {
 			delay--
 		}
 		// If the ringbuffer has something we can read and send off
-		err := r.ringBuffer.Next(readTimeout)
+		chunk, err := r.ringBuffer.Next(readTimeout)
 		if err != nil || !r.isRunning {
 			if err == io.EOF {
 				break
@@ -403,31 +403,17 @@ func (r *revid) outputClips() {
 			continue
 		}
 
-		// TODO(kortchak): Do this without copy/allocate.
-		// To address this, the io.ReadWriters held by the ring buffer
-		// should be io.WriterTos with a modification such that there
-		// is the capacity to reset for a retry or not keep offset
-		// state between WriteTo calls. Then the sendClip field should
-		// be made a func(io.WriterTo) (int error).
-		// This requires that bytes.Buffer not be used as the ring
-		// element type.
-		clip, err := ioutil.ReadAll(r.ringBuffer)
-		if err != nil || !r.isRunning {
-			r.Log(Error, err.Error())
-			continue
-		}
-
-		bytes += len(clip)
+		bytes += chunk.Len()
 		r.Log(Detail, "About to send")
-		err = r.sendClip(clip)
+		err = r.sendClip(chunk)
 		if err == nil {
 			r.Log(Detail, "Sent clip")
 		}
 
-		if r.isRunning && err != nil && len(clip) > 11 {
+		if r.isRunning && err != nil && chunk.Len() > 11 {
 			r.Log(Debug, "Send failed! Trying again")
 			// Try and send again
-			err = r.sendClip(clip)
+			err = r.sendClip(chunk)
 
 			// if there's still an error we try and reconnect, unless we're stopping
 			for r.isRunning && err != nil {
@@ -446,10 +432,11 @@ func (r *revid) outputClips() {
 				}
 
 				r.Log(Debug, "Trying to send again with new connection...")
-				r.sendClip(clip) // TODO(kortschak): Log these errors?
+				r.sendClip(chunk) // TODO(kortschak): Log these errors?
 			}
 		}
 
+		chunk.Close() // ring.Chunk is an io.Closer, but Close alwats returns nil.
 		r.Log(Detail, "Done reading that clip from ringbuffer...")
 
 		// Log some information regarding bitrate and ring buffer size if it's time
@@ -467,54 +454,70 @@ func (r *revid) outputClips() {
 }
 
 // senClipToFile writes the passed clip to a file
-func (r *revid) sendClipToFile(clip []byte) error {
+func (r *revid) sendClipToFile(clip *ring.Chunk) error {
 	r.sendMutex.Lock()
-	defer r.sendMutex.Unlock()
-	_, err := r.outputFile.Write(clip)
-	if err != nil {
-		return err
-	}
-	return nil
+	_, err := clip.WriteTo(r.outputFile)
+	r.sendMutex.Unlock()
+	return err
 }
 
 // sendClipToHTTP takes a clip and an output url and posts through http.
-func (r *revid) sendClipToHTTP(clip []byte) error {
-	r.sendMutex.Lock()
+func (r *revid) sendClipToHTTP(clip *ring.Chunk) error {
 	defer r.sendMutex.Unlock()
+	r.sendMutex.Lock()
+
 	timeout := time.Duration(httpTimeOut * time.Second)
 	client := http.Client{Timeout: timeout}
-	url := r.config.HttpAddress + strconv.Itoa(len(clip))
-	r.Log(Debug, fmt.Sprintf("Posting %s (%d bytes)\n", url, len(clip)))
-	resp, err := client.Post(url, "video/mp2t", bytes.NewReader(clip))
+	url := r.config.HttpAddress + strconv.Itoa(clip.Len())
+
+	// FIXME(kortschak): This is necessary because Post takes
+	// an io.Reader as a parameter and closes it if it is an
+	// io.Closer (which *ring.Chunk is), ... and because we
+	// use a method value for dispatching the sendClip work.
+	// So to save work in this case, sendClip should be made
+	// a proper method with a behaviour switch based on a
+	// revid field so that we can prepare these bytes only
+	// once for each clip (reusing a buffer field? or tt
+	// might be work using a sync.Pool for the bodies).
+	post := bytes.NewBuffer(make([]byte, 0, clip.Len()))
+	_, err := clip.WriteTo(post)
+	if err != nil {
+		return fmt.Errorf("Error buffering: %v", err)
+	}
+
+	r.Log(Debug, fmt.Sprintf("Posting %s (%d bytes)\n", url, clip.Len()))
+	resp, err := client.Post(url, "video/mp2t", post)
 	if err != nil {
 		return fmt.Errorf("Error posting to %s: %s", url, err)
 	}
 	defer resp.Body.Close()
+
 	body, err := ioutil.ReadAll(resp.Body)
 	if err == nil {
 		r.Log(Debug, fmt.Sprintf("%s\n", body))
 	} else {
 		r.Log(Error, err.Error())
 	}
+
 	return nil
 }
 
 // sendClipToFfmpegRtmp sends the clip over the current rtmp connection using
 // an ffmpeg process.
-func (r *revid) sendClipToFfmpegRtmp(clip []byte) (err error) {
+func (r *revid) sendClipToFfmpegRtmp(clip *ring.Chunk) error {
 	r.sendMutex.Lock()
-	defer r.sendMutex.Unlock()
-	_, err = r.ffmpegStdin.Write(clip)
-	return
+	_, err := clip.WriteTo(r.ffmpegStdin)
+	r.sendMutex.Unlock()
+	return err
 }
 
 // sendClipToLibRtmp send the clip over the current rtmp connection using the
 // c based librtmp library
-func (r *revid) sendClipToLibRtmp(clip []byte) (err error) {
+func (r *revid) sendClipToLibRtmp(clip *ring.Chunk) error {
 	r.sendMutex.Lock()
-	defer r.sendMutex.Unlock()
-	err = r.rtmpInst.Write(clip)
-	return
+	_, err := clip.WriteTo(r.rtmpInst)
+	r.sendMutex.Unlock()
+	return err
 }
 
 // setupOutputForFfmpegRtmp sets up output to rtmp using an ffmpeg process

ring/ring.go

@@ -104,13 +104,13 @@ func (b *Buffer) Write(p []byte) (int, error) {
 	if len(p) > b.head.cap() {
 		return 0, ErrTooLong
 	}
-	if len(p) > b.head.cap()-b.head.len() {
+	if len(p) > b.head.cap()-b.head.Len() {
 		b.full <- b.head
 		b.head = nil
 		return b.Write(p)
 	}
 	n, err := b.head.write(p)
-	if b.head.cap()-b.head.len() == 0 {
+	if b.head.cap()-b.head.Len() == 0 {
 		b.full <- b.head
 		b.head = nil
 	}
@@ -179,7 +179,7 @@ func (b *Buffer) Read(p []byte) (int, error) {
 		return 0, io.EOF
 	}
 	n, err := b.tail.read(p)
-	if b.tail.len() == 0 {
+	if b.tail.Len() == 0 {
 		b.tail.reset()
 		b.empty <- b.tail
 		b.tail = nil
@@ -200,7 +200,8 @@ func newChunk(buf []byte) *Chunk {
 	return &Chunk{buf: buf[:0]}
 }
 
-func (b *Chunk) len() int {
+// Len returns the number of bytes held in the chunk.
+func (b *Chunk) Len() int {
 	return len(b.buf) - b.off
 }
 
@@ -228,7 +229,7 @@ func (b *Chunk) write(p []byte) (n int, err error) {
 }
 
 func (b *Chunk) read(p []byte) (n int, err error) {
-	if b.len() <= 0 {
+	if b.Len() <= 0 {
 		if len(p) == 0 {
 			return 0, nil
 		}
@@ -246,18 +247,18 @@ func (b *Chunk) read(p []byte) (n int, err error) {
 //
 // WriteTo will panic if the Chunk has not been obtained through a call to Buffer.Next or
 // has been closed. WriteTo must be used in the same goroutine as the call to Next.
-func (b *Chunk) WriteTo(w io.Writer) (n int, err error) {
+func (b *Chunk) WriteTo(w io.Writer) (n int64, err error) {
 	if b.owner == nil || b.owner.tail != b {
 		panic("ring: invalid use of ring buffer chunk")
 	}
-	n, err = w.Write(b.buf)
-	if n > len(b.buf) {
+	_n, err := w.Write(b.buf)
+	if _n > len(b.buf) {
 		panic("ring: invalid byte count")
 	}
-	if n != len(b.buf) {
-		return n, io.ErrShortWrite
+	if _n != len(b.buf) {
+		return int64(_n), io.ErrShortWrite
 	}
-	return n, nil
+	return int64(_n), nil
 }
 
 // Close closes the Chunk, reseting its data and releasing it back to the Buffer. A Chunk

rtmp/rtmp.go

@@ -49,7 +49,7 @@ import (
 // Session provides an interface for sending flv tags over rtmp.
 type Session interface {
 	StartSession() error
-	Write([]byte) error
+	Write([]byte) (int, error)
 	Close() error
 }
 
@@ -85,14 +85,14 @@ func (s *session) StartSession() error {
 }
 
 // Write writes a frame (flv tag) to the rtmp connection
-func (s *session) Write(data []byte) error {
+func (s *session) Write(data []byte) (int, error) {
 	if s.rtmp == nil {
-		return errors.New("rtmp: attempt to write to non-running session")
+		return 0, errors.New("rtmp: attempt to write to non-running session")
 	}
 	if C.write_frame(s.rtmp, (*C.char)(unsafe.Pointer(&data[0])), C.uint(len(data))) != 0 {
-		return errors.New("RTMP write error! Check rtmp log for details!")
+		return 0, errors.New("RTMP write error! Check rtmp log for details!")
 	}
-	return nil
+	return len(data), nil
 }
 
 // Close terminates the rtmp connection